Metravi
Showing 49–72 of 103 results
-
CLAMP METER, DIGITAL AC/DC CLAMP METER, Metravi
DT-4250 Digital AC/DC Clamp Meter
- Data Hold Facility
- Double molded body with rubber coating
- Clamp Jaw Size: 30mm
- Display : 3-3/4 Digital 3999 Counts Backlit LCD
- DC Voltage : 0 – 400m/4/40/400/600V.
- Accuracy : ±0.8%
- Diode Test and Continuity Test
- Confirms to CE, IEC 61010, CAT-III 600V
SKU: n/a -
CLAMP METER, DIGITAL TRMS AC/DC CLAMP METER, DIGITAL AC/DC CLAMP METER, Metravi
DT-425T Digital TRMS AC/DC Clamp Meter
CLAMP METER, DIGITAL TRMS AC/DC CLAMP METER, DIGITAL AC/DC CLAMP METER, MetraviDT-425T Digital TRMS AC/DC Clamp Meter
- 3-3/4 Digits 3999 Counts Backlit LCD Display
- Built-in Flash light to access dark Areas
- Non Contact Voltage Detector to show the presence of Voltage
- Sleek Ergonomic Design
- Confirms to IEC/EN 61010-1, IEC/EN 61010-2-032 & IEC/EN 61010-2-033
- Confirms to UL, CAT-III 600V
- Data Hold to Freeze Displayed Data
- MAX-MIN record function
- Relative measuring facility
- 30mm Jaw Dia
- Overload indication
SKU: n/a -
CLAMP METER, DIGITAL AC CLAMP METER, LEAKAGE CURRENT CLAMP METER, AC LEAKAGE CURRENT CLAMP METER, Metravi
DT-4671 AC Leakage Current Clamp Meter
CLAMP METER, DIGITAL AC CLAMP METER, LEAKAGE CURRENT CLAMP METER, AC LEAKAGE CURRENT CLAMP METER, MetraviDT-4671 AC Leakage Current Clamp Meter
- Auto Power Off
- Max / Min recording with Data Hold
- Clamp Jaw Size : 30mm
- Display : 3-3/4 Digits 3999 Counts LCD with 40 Segment analog Bargraph
- AC Voltage : 0 – 400V
- Accuracy : ±1.5%
- AC Current : 0 – 40m/400m/4A/40A/80A/100A
- Accuracy : ±1.0%
- Resistance : 40 – 400 Ohms
- Accuracy : ±1.0%
- Low Pass Filter for eliminating effect of High Frequency Noise.
SKU: n/a -
CLAMP METER, DIGITAL AC/DC CLAMP METER, Metravi
DT-8250 Digital AC/DC Clamp Meter
- Auto Power off
- Auto/Manual Ranging
- Data Hold
- Peak Hold
- Clamp Jaw Dia: 2″ (52mm) approx
- Display: 3-3/4 digits (4000 counts) Backlit LCD
- DC Voltage: 400mV/4V/40V/400V/1000V
- Accuracy: ± (3.5% + 10 digits)
- Diode and Continuity
SKU: n/a -
EMF / GAUSS METER, Metravi
EMF-823 Magnetic Field EMF ELF Meter
- Display: 3-1/2 digits LCD, maximum reading 1999.
- Range: 200/2000 mG,20/200µT.
- Resolution: 0.1/1 mG or 0.01/0.1 µT.
- Frequency response: 30Hz to 300Hz.
- Sensor: Single Axis
- Accuracy: ±(2.5%±6dgt) at 50Hz/60Hz.
- Over load Indication
- Battery: 9V
SKU: n/a -
EARTH/GROUND RESISTANCE TESTER, EARTH RESISTANCE TESTER, Metravi
ERT-1501 Digital Earth Resistance Tester with Kit
EARTH/GROUND RESISTANCE TESTER, EARTH RESISTANCE TESTER, MetraviERT-1501 Digital Earth Resistance Tester with Kit
- Data Hold facility
- Displays test result and battery voltage on the same screen
- LOCK Button for continuous HANDS FREE measurement
- Both Earth Resistance and Earth Resistivity can be measured
- Can be used in 4 Terminal and 3 Terminal configurations
- Display : 4 Digits EXTRA LARGE Backlit Dual LCD Display
- Earth Resistance Range : 0 – 10/100/1000 Ohms
- Accuracy : ±3% + 2d
- Low Resistance Range : 0 – 200 k.Ohms
SKU: n/a -
EMF / GAUSS METER, Metravi
ET-99A Thermo Anemometer
- Range : 0 ~ 3000mT (milli Tesla) / 0~30000G (Gauss)
- Unit Conversion : 1mT=10G(Gauss)
- Can display the N/S polarity of DC magnets
- Relative / Peak Hold / Real time Zero function
- USB PC interface, with software
- Power : 9V AAA*6
- Operating temperature and humidity: 5°C ~ 40°C
- External AC 100 ~ 240V to DC 9V/0.5A power supply
SKU: n/a -
ENVIRONMENTAL METER, ANEMOMETER, THERMO ANEMOMETER, MINI ENVIRONMENTAL TESTERS, Metravi
ET-99L Lux Meter
ENVIRONMENTAL METER, ANEMOMETER, THERMO ANEMOMETER, MINI ENVIRONMENTAL TESTERS, MetraviET-99L Lux Meter
- 4 Measuring Ranges in both Lux/FC
- High accuracy and rapid response
- Low battery Indication
- MAX/MIN mode
- REL measuring mode
- Data Hold mode
- Lux/FC unit switch
- Backlight can turn on and turn off
- Auto power-off (disabling option available)
- Range switch
- Auto and Manual range selection
- Tripod-mountable (tripod available at extra cost)
SKU: n/a -
ENVIRONMENTAL METER, MOISTURE METER, PIN-TYPE MOISTURE METER, MINI ENVIRONMENTAL TESTERS, Metravi
ET-99M Pin-type Moisture Meter
ENVIRONMENTAL METER, MOISTURE METER, PIN-TYPE MOISTURE METER, MINI ENVIRONMENTAL TESTERS, MetraviET-99M Pin-type Moisture Meter
- Wood/Building Material Modes
- WOOD MODE
Range: 6 to 99%
Accuracy: ±4%
Resolution: 0.1% - BUILD MODE
Range: 0.2 to 2%
Accuracy: ±0.1%
Resolution: 0.1% - Quick response
- Data Hold
- Auto Power-Off
- Low battery indication
SKU: n/a -
ENVIRONMENTAL METER, SOUND LEVEL METER, MINI ENVIRONMENTAL TESTERS, Metravi
ET-99SL Sound Level Meter
ENVIRONMENTAL METER, SOUND LEVEL METER, MINI ENVIRONMENTAL TESTERS, MetraviET-99SL Sound Level Meter
- Standards Applied : IEC61672-1 CLASS 2
- Frequency Range : 31.5Hz to 8kHz
- Measuring Level Range : 30 to 130dB
- Frequency Weighting : A
- Microphone :1/2 inch electret condenser microphone
- Display : LCD 3-1/2 digits
- Resolution : 0.1dB
- Display Up Data : 0.5 secs
- Time Weighting : FAST (125mS), SLOW (1000mS)
- Accuracy : ± 1.5 dB (at 1kHz, Standard-Audioquelle)
- Alarm Function
- Auto Power Off
SKU: n/a -
DIGITAL PANEL METER, FREQUENCY COUNTER, Metravi
FC-2700 Frequency Counter
- Bench Type
- 8 Digit RED LED Display
- Dual Channel Input
- Range: up to 2.7GHz
- Resolution: 100Hz
- Accuracy: ±1%
- Sensitivity: 20mV rms up to 8MHz / 30mV rms up to 10MHz / 20mV rms up to 80Hz/ 30mV rms up to 2.7GHz
- Auxiliary Power Supply: 220V AC 50Hz
SKU: n/a -
FUNCTION GENERATOR, DIGITAL FUNCTION GENERATOR, Metravi
FG-1000 Digital Function Generator
- Frequency of the mode: 0.1Hz—1MHz
- Output waveform: Sine, Triangle, Square, ±Ramp, ±Pulse
- TTL/CMOS and OUTPUT synchronous output
- Voltage Control Frequency (VCF) Capacity
- Less than 1% distortion at 10Hz– 100 KHz
- Less than 0.5dB frequency response at 0.1Hz— 100 KHz
- Frequency Counter: 1Hz—30MHz
- Amplitude: Not less than 20V p–p (open circuit)
- DC Voltage: 0–±10V continuously adjustable
SKU: n/a -
GAS DETECTORS & ANALYSERS, CARBON MONOXIDE DETECTOR, COMBUSTIBLE GAS LEAKAGE DETECTOR, OXYGEN DETECTOR, MULTI GAS DETECTOR, Metravi
GD-09-4M Four-in-One Multi Gas Detector
GAS DETECTORS & ANALYSERS, CARBON MONOXIDE DETECTOR, COMBUSTIBLE GAS LEAKAGE DETECTOR, OXYGEN DETECTOR, MULTI GAS DETECTOR, MetraviGD-09-4M Four-in-One Multi Gas Detector
- Gas Sampling Method : Natural diffusion
- Detecting Gases: Combustible Gas, H2S, CO, O2
- Accuracy: ≤±5% F.S.
- Response Time: ≤30s
- LCD displays real-time and system status
- Alarms: LED, audio and vibration alert for gas over or under range
- Low Battery indication
- Sensor fault indication
- Power Source: DC3.7V Li-on battery, 2000 mAh
- Charging Time: 6h ~ 8h
- Working Time: ≥8h continuously (without alarms)
SKU: n/a -
GAS DETECTORS & ANALYSERS, OXYGEN DETECTOR, Metravi
GD-09-O2 Portable Oxygen Gas Detector
- Measuring Range: 0-25%VOL
- Resolution: 0.1%VOL
- Response Time: T90≤30/60/180S
- Accuracy: ≤5%FS
- Repeatability: ≤2%FS
- Sampling Method: Diffusion
- Alarm Method: Sound, LED, Vibration
- Sound Intensity: ≥90dB
- Display: LCD
- Battery: Rechargeable
- Continuous Operating Time: Around 14 days
- Charging Time: 3-5 Hours
- Ingress Protection: IP66
- Certifications: Ex ia II CT4 Gb
SKU: n/a -
GAS DETECTORS & ANALYSERS, GAS SAMPLING PUMP, Metravi
GD-GSP Gas Sampling Pump
- Rated Voltage : DC 3.0V
- Voltage Range : DC2.0V~DC3.2V
- Rated Current : ≦400mA : ≧300mm Hg
- Max. Pressure : <60s
- Pump Time : DC 2.0V
- Resume Voltager
- Working Flow : ≦ LPM
- Life Span : 200hrs (working continuously)
- Noise : ≦60dB(A)
- Diameter : 3.2mm
- Housing Material : AND
SKU: n/a -
GAS DETECTORS & ANALYSERS, COMBUSTIBLE GAS LEAKAGE DETECTOR, Metravi
GLD-01 Combustible Gas Leakage Detector
GAS DETECTORS & ANALYSERS, COMBUSTIBLE GAS LEAKAGE DETECTOR, MetraviGLD-01 Combustible Gas Leakage Detector
- Higher Sensitivity
- Adjustable tick rate to locate leaks quickly & easily
- Visual leak detection by LED Indicator
- Precision sensor detects even the smallest leaks
- Fast Response of less than two seconds to 40% LEL
- Includes Earphone Jack
- 16” gooseneck probe
- Sensitivity : 50 PPM methane
- Sensor Type : Low power semiconductor
SKU: n/a -
EMF / GAUSS METER, Metravi
GM-197 Static cum Electromagnet Gauss Meter
- Range : 0 ~ 3000mT (milli Tesla) / 0~30000G (Gauss)
- Unit Conversion : 1mT=10G(Gauss)
- Can display the N/S polarity of DC magnets
- Relative / Peak Hold / Real time Zero function
- USB PC interface, with software
- Power : 9V AAA*6
- Operating temperature and humidity: 5°C ~ 40°C
- External AC 100 ~ 240V to DC 9V/0.5A power supply
SKU: n/a -
ENVIRONMENTAL METER, TEMPERATURE AND HUMIDITY METER, THERMO-HYGRO METER, Metravi
HT-12 Temperature and Humidity Meter with External Probe
ENVIRONMENTAL METER, TEMPERATURE AND HUMIDITY METER, THERMO-HYGRO METER, MetraviHT-12 Temperature and Humidity Meter with External Probe
- Indoor Temperature/Humidity testing, along with outdoor temperature testing simultaneously
- Records MIN/MAX values of Temperature/Humidity
- °C/°F unit selectable
- Clock: 12/24 hour format selectable
- Alarm clock : Alarm time up to 60 seconds
- Comfort level indication
- Temperature Range: -10°C ~ 50°C
- Accuracy: ±1°C
- Resolution: 1°C
- Humidity Range: 20% ~ 95%RH
SKU: n/a -
INSULATION TESTER, ANALOGUE INSULATION TESTER, Metravi
IT-500 Analogue Insulation Tester
- Light Weight Easy to Operate
- LED for indicating output ON or OFF
- Insulation Resistance Range : 0 – 1000 M.Ohms
- Insulation Resistance test Voltage : 500V
- AC Voltage : 0 – 600V AC
- Used for Insulation test for general equipment and electronic components.
- Internal Battery Check Facility
SKU: n/a -
CALIBRATOR, RTD CALIBRATOR, MV THERMOCOUPLE & RTD SOURCE CALIBRATOR, Metravi
M-01S mV Thermocouple and RTD Source Calibrator
CALIBRATOR, RTD CALIBRATOR, MV THERMOCOUPLE & RTD SOURCE CALIBRATOR, MetraviM-01S mV Thermocouple and RTD Source Calibrator
- DC Voltage: -10.000mV~110.00mV-0.1000V~1.1000V
- Accuracy: 0.05%+0.03mV / 0.05%+0.3mV
- Resolution: 0.01mV / 0.0001V
- Resistance: 0~400.0Ω / 0~4.000KΩ
- Accuracy: 0.05%+0.2Ω / 0.05%+2Ω
- Resolution: 0.1Ω / 1Ω
- Electrical safety : EN61010-1:2001, CE, TUV ISO-9001 Electromagnetic compatibility (EMC) : EN61326-1:2006
- Protection : IP40, 1m drop-tested
- Vibration and fall : IEC 60068-2-64:2008, IEC 60068-2-32:2008
- Display : 5 digits, segment code LCD with white backlight
- Power Supply : 3 x AA alkaline batteries
- Accessories : 1 pair Industrial test leads, User Manual, 3 units AA alkaline Battery, Thermocouple Adapter
SKU: n/a -
CALIBRATOR, MV MA CALIBRATOR, MV MA WITH LOOP CALIBRATOR, Metravi
M-05S mV mA Loop Calibrator
- Power Supply: Internal 24V circuit power supply
- Maintenance setup functions
- Auto power-off
- Backlight
- LED Flashlight
- Segment code is displayed on the LCD with a white backlight.
- Power: 3 AA battery cells
- Low-battery detection
- Small, firm, reliable, suitable for field use
- Electrical safety: EN61010-1:2001
- Withstand voltage: AC3540V(50/60Hz)/5 seconds between terminal and housing.
- Insulation impedance: DC1000V/100MΩ or more between terminal and housing.
SKU: n/a -
Metravi, MOTOR CHECKER, ANALOGUE MOTOR CHECKER
MC-22 Analogue Motor Checker
- Provides a fast and easy means to detect electrical faults- short circuits, open circuits, damaged insulation etc. – in motors and other three phase machine
- Used on stationary motors
- It measures insulation resistance in the range of; 0 – 20 M ohms at 500 V DC, 0.25 mA Max.
- Resistance measuring range: 0 – 60 ohms. ( 0 – 0.2 ohms in Range 6 )
- Inductance measuring range: 0 – 300 mH ( 0 – 1 mH in Range 6 )
- Battery Test: Condition of batteries indicated on meter
- Battery operated
SKU: n/a -
Metravi, MOTOR CHECKER, DIGITAL MOTOR CHECKER
MC-22D Digital Motor Checker
- Micro Controller based diagnostic tool for Electrical Engineers
- Indentifies Open and Short Circuits / Loose Connections In a winding coil
- Detect Rotor Bar problems without dismounting the motor
- Display: LCD
- Insulation Resistance: 0 – 20M.Ohms at 500V DC
- Resistance Test: 0 – 200 / 20 / 6 / 2 / 600m / 200m.Ohms
- Inductance Test: 0 – 1000m / 300m / 100m / 30m / 10m / 3mH
- Low Battery indication
SKU: n/a