-26%
Clamp Meter, Metravi
DT-4671 AC Leakage Current Clamp Meter
Availability:
6 in stock
- Auto Power Off
- Max / Min recording with Data Hold
- Clamp Jaw Size : 30mm
- Display : 3-3/4 Digits 3999 Counts LCD with 40 Segment analog Bargraph
- AC Voltage : 0 – 400V
- Accuracy : ±1.5%
- AC Current : 0 – 40m/400m/4A/40A/80A/100A
- Accuracy : ±1.0%
- Resistance : 40 – 400 Ohms
- Accuracy : ±1.0%
- Low Pass Filter for eliminating effect of High Frequency Noise.
6,700.00 ₹ 9,045.00 ₹
6 in stock
CompareRelated products
-
CAPACITANCE METER, Metravi
DCM-1502 Capacitance Meter
- Easy to read LCD Display 3-1/2 Digits 1999 Counts
- High measuring Accuracy
- Measurements possible even under strong magnetic field
- LSI Circuit Provides high reliability and durability
- Light Weight and compact construction
- Range: 0 – 200p / 2n / 20n / 200n / 2u / 20u / 200u / 2000u / 20000uF
- Accuracy: ± 0.5%
SKU: n/a -
Calibrator, Metravi
VIB-CAL-01 Handheld Vibration Calibrator
- Frequency : 159.2Hz +0.5%
- Amplitude : Acceleration : 9.81 m/s2 RMS
- Velocity : 9.81mm/sec RMS
- Displacement : 9.81 micron RMS
- Accuracy : ± 5%
- Distortion : < 3%
- Maximum load : 120 grams
- Power : 9V Rechargeable Battery (Upto 1.5 hours operation)
- Charge time : 15 hours
- Sensor Mounting base : M5 tapped hole
- Operating Temperature : 0°C to 55°C
- Operating Humidity : 90% non–condensing
SKU: n/a -
Cable Fault Locator, Metravi
CFL-02 Digital Cable Fault Locator
- Pin Points Fault in all underground cables.
- Useful for Power, Control & Telecom Cables
- Maximum Cable Length 5kms
- Accuracy ±5%
- Faults located can be Medium/High Resistance Faults, Open Circuit and Short Circuit faults
- Two Techniques used
- Potential Comparison Technique
- Capacitance Comparison Technique
SKU: n/a -
Battery Impedance Tester, Solar Tools, Metravi
TM-6002 Battery Impedance Tester
- Large Backlit LCD Display
- Data Logging up to 9999 sets
- Resistance Measurement: 10uΩ to 40Ω
- Voltage Measurement: 1mV to 40V
- Temperature Measurement: -20° to 60°C
- DC Current Measurement: 0.6A to 700A DC
- Measures internal impedance and open circuit voltage of the secondary batteries, including Nickel-metal Hydride (NiMH), Nickel-cadmium (NiCd), Lithium-ion (Li-ion), Alkaline and Lead-acid batteries.
- AC four-terminal method to measure the internal impedance by eliminating lead impedance and contact impedance to get accurate results.
SKU: n/a
