METAL DETECTOR, Metravi
MD-300 Metal Detector
Availability:
6 in stock
- Simple operation, compact design, easy to store, low failure rate.
- Sensitivity is very easy to detect the size of a pin (or even less), metal items.
- Has the Low battery indication
- Very Cost Effective and stylish product
- Audio as well as Vibration Alert
- Battery Operated
- Light Weight
- Detection Distance: Pin – 35mm, Handgun – 120mm, US25 Cents 50mm.
1,950.00 ₹ 2,633.00 ₹
6 in stock
CompareRelated products
-
Clamp Meter, Metravi
DT-1150 Digital AC Clamp Meter
0 out of 5(0)- Diode and Continuity test
- Jaw Opening : Approx. 40mm
- Overload Protection
- CE CAT III 600V
- Dimension : 250(L) × 97(W) × 48(H) mm
- Weight : 345gm approx.(including battery)
- Power Supply : 3V (2pcs AAA Batteries)
- Working Environment : 0~40°C, 45% ~ 75% RH Non Condensing (When temperature is less than 10°C)
- Storage Environment : -10°C~50°C, RH is less than 80%
- Accessories : User Manual, Test Leads, 2pcs battery, Soft carry case
SKU: n/a -
Cable Fault Locator, Metravi
CFL-02 Digital Cable Fault Locator
0 out of 5(0)- Pin Points Fault in all underground cables.
- Useful for Power, Control & Telecom Cables
- Maximum Cable Length 5kms
- Accuracy ±5%
- Faults located can be Medium/High Resistance Faults, Open Circuit and Short Circuit faults
- Two Techniques used
- Potential Comparison Technique
- Capacitance Comparison Technique
SKU: n/a -
Calibrator, Metravi
CAL-400-3 mV mA Calibrator
0 out of 5(0)- Consists of a transmitter and a receiver
- Used to detect or trace conductors and to find short faults in them.
- Conductor tracing in the soil
- Detecting fuses and assigning current circuits
- Tracing sockets and distribution sockets having accidentally been covered by plastering
- Detecting interruptions and short-circuits in floor heating
- Tracing metallic water and heating piping
- Automatic and manual sensitivity adjustment
- Acoustic reception signal may be switched off
- Auto-Power-Off function
- Backlit LCD
SKU: n/a -
Battery Impedance Tester, Solar Tools, Metravi
TM-6002 Battery Impedance Tester
0 out of 5(0)- Large Backlit LCD Display
- Data Logging up to 9999 sets
- Resistance Measurement: 10uΩ to 40Ω
- Voltage Measurement: 1mV to 40V
- Temperature Measurement: -20° to 60°C
- DC Current Measurement: 0.6A to 700A DC
- Measures internal impedance and open circuit voltage of the secondary batteries, including Nickel-metal Hydride (NiMH), Nickel-cadmium (NiCd), Lithium-ion (Li-ion), Alkaline and Lead-acid batteries.
- AC four-terminal method to measure the internal impedance by eliminating lead impedance and contact impedance to get accurate results.
SKU: n/a