-26%
GAS DETECTORS & ANALYSERS, CARBON MONOXIDE DETECTOR, COMBUSTIBLE GAS LEAKAGE DETECTOR, OXYGEN DETECTOR, MULTI GAS DETECTOR, Metravi
GD-09-4M Four-in-One Multi Gas Detector
Availability:
6 in stock
- Gas Sampling Method : Natural diffusion
- Detecting Gases: Combustible Gas, H2S, CO, O2
- Accuracy: ≤±5% F.S.
- Response Time: ≤30s
- LCD displays real-time and system status
- Alarms: LED, audio and vibration alert for gas over or under range
- Low Battery indication
- Sensor fault indication
- Power Source: DC3.7V Li-on battery, 2000 mAh
- Charging Time: 6h ~ 8h
- Working Time: ≥8h continuously (without alarms)
19,350.00 ₹ 26,123.00 ₹
6 in stock
CompareRelated products
-
Calibrator, Metravi
709H mV mA Loop Calibrator with HART Communication
- Compact Loop Calibrator with HART communication
- Able to read basic device information and execute diagnostic tests
- High precision ±0.01%
- High resolution 0.001mA
- Automatic Ramp & Step
- High visibility 3.2″ TFT colour display with backlight
- Supports SCPI
- Auto Power Off and Low Battery display
- Max. permitted voltage: 30V (between any two terminals or between any terminal and earth ground)
- Operating temperature : 0°C ~ 50°C
- Operating relative humidity: ≤ 80%RH
- Protection level: IP65 (Dust, Water spray)
SKU: n/a -
Cable Fault Locator, Metravi
TDRL-912 Telecom Cable Fault Locator
- Digital Gain Adjustment Control: to make the gain adjustment very easy.
- Digital Waveform Automatic Identification technique: to make sure there is no test dead zone.
- Top-grade ARM single chip micro-computer: enables calculations and judge fault waveforms accurately.
- Display: Large colourful LCD, easy and simple to use.
- Power: High-energy Li-ion battery, provides continuous
- Working Capacity: for 10 hours (post full charge)
- Max range: 8 kms (16kms/32kms are optional)
- Highest resolution: 1m
- Dead Zone: 0m
- Power consumption: 1W
- Package includes: Fault Locator, 2 Test Lines, Charger, Carrying Bag, User Manual, CD with Software & U-Disk (only for USB function)
SKU: n/a -
Calibrator, Metravi
VIB-CAL-01 Handheld Vibration Calibrator
- Frequency : 159.2Hz +0.5%
- Amplitude : Acceleration : 9.81 m/s2 RMS
- Velocity : 9.81mm/sec RMS
- Displacement : 9.81 micron RMS
- Accuracy : ± 5%
- Distortion : < 3%
- Maximum load : 120 grams
- Power : 9V Rechargeable Battery (Upto 1.5 hours operation)
- Charge time : 15 hours
- Sensor Mounting base : M5 tapped hole
- Operating Temperature : 0°C to 55°C
- Operating Humidity : 90% non–condensing
SKU: n/a -
Calibrator, Metravi
SC-05 Sound Level Calibrator
- Standard Sound Ringing Capabilities at 94dB and 114dB
- Can be used for both A Weighting and C Weighting Calibration
- Low Battery Indication
- Output frequency: 1kHz
- Accuracy: ±0.5dB
- Output Frequency 1000Hz, ±4%
- Reference Temperature Conditions >23ºC (73ºF)
- Atmospheric pressure >1013 mbar (760mm of Hg)
- Relative humidity >65%RH
- Accuracy of Sound Pressure Level Under stated reference environment conditions ±0.5dB
- Complete with user manual and battery
SKU: n/a
