Deal of the Day
Up to 75% off | Data Logger
Testo 270 cooking oil tester
Testo 105 – Food Thermometer.
Up to 75% off | Data Logger
PTRANS-T10 Temp Datalogger
Testo 108 – Digital Food Thermometer.
Up to 75% off | Data Logger
PTD50 Multi-Use Temp Datalogger
Testo 106 – Food-Thermometer.
Calibrator, Metravi
11+ Universal Source Calibrator
Provides 25% step or 100% step DC Current output current manually or Automatically.
TC Source terminals and built in lead connector of same temperature, The unit can be converted between °C & °F
Auto Power Off
Display : 6 Digits white backlight LED on the LCD
Technical Specifications
DC voltage : 0 – 100mV/1V/10V
Resolution : 1µV/10µV/0.1mV
Accuracy : ±0.02%
DC Current : 0 – 20mA
Resolution : 1µA
Accuracy : ±0.02%
SKU: n/a
ELCB TESTER, Metravi
1810D ELCB Tester
2000mS readout for testing latest delay action breakers
Fully programmed operation
Accurate digital read out of tripping time
Two LED lamps give quick check for correct wiring
Operates from mains supply. No need for batteries
Compact, lightweight and simple to operate
Zero cross circuitry permits testing at 0°and 180°portion of sine wave. At these two tests minimum (best) and maximum (worst) trip times will be displayed
Trip Current Setting: 5mA, 10mA, 30mA, 100mA, 300mA, 500mA
Operating Voltage: 220 / 230 / 240V AC, 50/60Hz
SKU: n/a
LUX METER, SOLAR IRRADIANCE AND POWER METER, SOLAR TOOLS, Metravi
207 Solar Power / Sunlight Meter
Sunlight Measurement up to 1999W/m2 or 634BTU /(Ft2*hr)
High Accuracy and Fast Response
Data Hold function
Unit and sign display for easy reading
Measuring unit selectable between W/m2 and BTU/(Ft2*hr)
Direct Reading with no adjustments
Max / Min value recording
Low Battery Indication
3-1/2 Digits LCD Display
Resolution 1W/m2 ; 1 BTU /(Ft2*hr)
Accuracy: ± 10W/m2
SKU: n/a
Metravi, MULTIMETER, ANALOGUE MULTIMETER
250TR Analogue Multimeter
Hand Held Multimeter
DC Voltage : 0 – 2.5V/10V/50V/250V/1000V
Accuracy : ± 5%
AC Voltage : 0 – 10V/50V/250V/1000V
Accuracy : ± 5%
DC Current : 0 – 10mA/250mA
Resistance : 0 – 20k / 2MΩ
Accuracy : ± 5%
Battery Test : 1.5V / 9V
Accuracy : ± 5%
Decibel : -22 to 20dB
Confirms to IEC 61010, CAT-II 300V
SKU: n/a
Clamp Meter, Metravi
307N Digital Clamp On Power Meter
Measures Power and Energy for single phase and three phase loads
Auto-ranging
Data Logging up to 99 Data
Sleep Mode
Clamp Jaw Dia: 56mm
Confirms to CAT III 600V, IEC 61010, CAT IV 300V
Non Contact Voltage Detector
Data Hold, Max / Min record
USB PC Interface
Display; 4 digits Triple Backlit LCD Display with analogue bargraph
SKU: n/a
Metravi, MULTIMETER, BENCH-TYPE MULTIMETER
45-TRMS Bench Type Multimeter
Power supply: 220V/ 110V AC
Manual range
41/2-digit large LCD display with back light(displaying range: 75 x 40 mm), max.reading: 19999
Voltage measurement up to 1000VDC and 750V AC
DC,AC current up to 20A
ACV frequency response: 50kHz
Frequency, Resistance, Capacitance measurement, Triode, Diode check and Continuity Test
Overload protection: 250V rms
Operation environment: 0°C-40°C,<75%R.H
Dimension: 260mm x 220mm x 82mm
Weight: approx. 1 kg
SKU: n/a
LCR METER, DIGITAL HAND-HELD LCR METER, LCR METER WITH MULTIMETER, MULTIMETER WITH LCR METER, Metravi
451 Digital LCR Meter with Multimeter
LCR METER, DIGITAL HAND-HELD LCR METER, LCR METER WITH MULTIMETER, MULTIMETER WITH LCR METER, Metravi
451 Digital LCR Meter with Multimeter
Peak Hold facility
Display: 3-1/2 Digital 1999 Counts Backlit LCD
Low Battery and Overload Indication
Confirms to IEC1010 Standards
Auto Power Off
DC Voltage : 0 – 200mV/2V/20V/200V/1000V
Accuracy : ±0.5%
AC Voltage : 0 – 200mV/2V/20V/200V/750V
Accuracy : ±0.8%
DC Current : 0 – 2mA/20mA/200mA/20A.
Accuracy : ±0.8%
SKU: n/a
IC TESTER, DIGITAL IC TESTER, Metravi
460 Digital Hand-held LCR Meter
Self Diagnosis
Identifies Unknown model number of Devices
Measures more than 2000 kinds of devices
Tests 54 / 74 series TTL
Tests 4000 and 4500 series CMOS
40 Pin capability
Control: 16 key tact switch keypad with dual tone sound indication
Display: 6 Digit LED Display
Test Socket: 40 pin ZIF Socket
SKU: n/a
Metravi, OIL TEST SET, MOTORISED OIL TEST SET
50-MOTS Motorised Oil Test Set
It is ideal for speedy and accurate testing of di-electric strength of transformer and circuit beaker oil under test room condition in accordance with IS:6792-1972 for oil testing.
Input: 230V Single Phase AC 50Hz.
Output: Continuously variable from 0 to 50kV AC with centre point of the HV winding earthed
Capacity: Spread over a range from 500VA to 1200VA depending on the output voltage
Duty: Intermittent duty cycle
Nature of Cooling: The transformer is cast resin type air cooled
Motor Operated
SKU: n/a
FLUKE, Temperature measurement, Temperature measurement
53 II Temperature Logging Digital Thermometer
FLUKE, Temperature measurement, Temperature measurement
53 II Temperature Logging Digital Thermometer
Single Input digital thermometer with data logging for lab, QA, process calibration, food safety and HVAC
Logs up to 500 points of data at user adjustable recording intervals
Measures J, K, T, E, R, S, and N-type thermocouples
Presents results in °C, °F, or Kelvin (K) on a large backlit display
Provides a recall function to easily review logged data
SKU: n/a