-26%
Metravi, MOTOR CHECKER, DIGITAL MOTOR CHECKER
MC-22D Digital Motor Checker
Availability:
6 in stock
- Micro Controller based diagnostic tool for Electrical Engineers
- Indentifies Open and Short Circuits / Loose Connections In a winding coil
- Detect Rotor Bar problems without dismounting the motor
- Display: LCD
- Insulation Resistance: 0 – 20M.Ohms at 500V DC
- Resistance Test: 0 – 200 / 20 / 6 / 2 / 600m / 200m.Ohms
- Inductance Test: 0 – 1000m / 300m / 100m / 30m / 10m / 3mH
- Low Battery indication
34,400.00 ₹ 46,440.00 ₹
6 in stock
CompareRelated products
-
Clamp Meter, Metravi
DT-369 TRMS AC Clamp Meter
- Display: 6000 Counts LCD
- T-RMS
- Auto Power Off
- Flame Sensor Current measurement
- Relative Measurement
- Clamp Jaw Dia: 30mm
- Display : LCD display.
- MAX. Display : 5999 digits (3 5/6) auto polarity display.
- Measuring method : ADC+MCU.
- Sampling rate : 3times/second.
- Overload display : “OL” displayed
SKU: n/a -
Calibrator, Metravi
CAL-500 Universal Calibrator
- Hand Held, Battery Operated
- Extra Large LCD Display
- Displays both output and measurements
- In the output / measurement mode following are available:
- DC Voltage: 0 – 24mV / 100mV / 15V
- Accuracy: ±0.2%
- DC Current: 0 – 24mA
- Accuracy: ±0.2%
- Step wise output of 4/8/12/16/20/24mA
- Passive Current output: 0 – 24mA
- Accuracy: ±0.2%
- 24V Loop Power Output
SKU: n/a -
Clamp Meter, Metravi
DT-115 Digital TRMS AC Clamp Meter
- Accuracy: ± (2%+30)
- Resistance: 0-600/6K/60K/600K/6M/40M Ohms
- Accuracy: ± (0.8%+3)
- Capacitance: 60nF/600nF/6uF/60uF/600uF/6mF/30mF
- Accuracy: ± (3.5%+20)
- Frequency: 0-10/100/1K/10K/100K/1M/10MHz
- Accuracy: ± (0.1%+3)
- Temperature: -20°C to 1000°C
- Accuracy: ± (1.0%+5)
- Diode & Continuity test
SKU: n/a -
Cable Fault Locator, Metravi
CFL-02 Digital Cable Fault Locator
- Pin Points Fault in all underground cables.
- Useful for Power, Control & Telecom Cables
- Maximum Cable Length 5kms
- Accuracy ±5%
- Faults located can be Medium/High Resistance Faults, Open Circuit and Short Circuit faults
- Two Techniques used
- Potential Comparison Technique
- Capacitance Comparison Technique
SKU: n/a
