-26%
Clamp Meter, Metravi
DT-8250 Digital AC/DC Clamp Meter
Availability:
6 in stock
- Auto Power off
- Auto/Manual Ranging
- Data Hold
- Peak Hold
- Clamp Jaw Dia: 2″ (52mm) approx
- Display: 3-3/4 digits (4000 counts) Backlit LCD
- DC Voltage: 400mV/4V/40V/400V/1000V
- Accuracy: ± (3.5% + 10 digits)
- Diode and Continuity
8,055.00 ₹ 10,874.00 ₹
6 in stock
CompareRelated products
-
Calibrator, Metravi
CAL-400-3 mV mA Calibrator
- Consists of a transmitter and a receiver
- Used to detect or trace conductors and to find short faults in them.
- Conductor tracing in the soil
- Detecting fuses and assigning current circuits
- Tracing sockets and distribution sockets having accidentally been covered by plastering
- Detecting interruptions and short-circuits in floor heating
- Tracing metallic water and heating piping
- Automatic and manual sensitivity adjustment
- Acoustic reception signal may be switched off
- Auto-Power-Off function
- Backlit LCD
SKU: n/a -
Cable Fault Locator, Metravi
TDRL-912 Telecom Cable Fault Locator
- Digital Gain Adjustment Control: to make the gain adjustment very easy.
- Digital Waveform Automatic Identification technique: to make sure there is no test dead zone.
- Top-grade ARM single chip micro-computer: enables calculations and judge fault waveforms accurately.
- Display: Large colourful LCD, easy and simple to use.
- Power: High-energy Li-ion battery, provides continuous
- Working Capacity: for 10 hours (post full charge)
- Max range: 8 kms (16kms/32kms are optional)
- Highest resolution: 1m
- Dead Zone: 0m
- Power consumption: 1W
- Package includes: Fault Locator, 2 Test Lines, Charger, Carrying Bag, User Manual, CD with Software & U-Disk (only for USB function)
SKU: n/a -
-
Calibrator, Metravi
M-01S mV Thermocouple and RTD Source Calibrator
- DC Voltage: -10.000mV~110.00mV-0.1000V~1.1000V
- Accuracy: 0.05%+0.03mV / 0.05%+0.3mV
- Resolution: 0.01mV / 0.0001V
- Resistance: 0~400.0Ω / 0~4.000KΩ
- Accuracy: 0.05%+0.2Ω / 0.05%+2Ω
- Resolution: 0.1Ω / 1Ω
- Electrical safety : EN61010-1:2001, CE, TUV ISO-9001 Electromagnetic compatibility (EMC) : EN61326-1:2006
- Protection : IP40, 1m drop-tested
- Vibration and fall : IEC 60068-2-64:2008, IEC 60068-2-32:2008
- Display : 5 digits, segment code LCD with white backlight
- Power Supply : 3 x AA alkaline batteries
- Accessories : 1 pair Industrial test leads, User Manual, 3 units AA alkaline Battery, Thermocouple Adapter
SKU: n/a
