Product Description
8 Digits Green LED Frequency Counter up to 2.7GHz.
-26%
DIGITAL PANEL METER, FREQUENCY COUNTER, Metravi
FC-2700 Frequency Counter
Availability:
6 in stock
- Bench Type
- 8 Digit RED LED Display
- Dual Channel Input
- Range: up to 2.7GHz
- Resolution: 100Hz
- Accuracy: ±1%
- Sensitivity: 20mV rms up to 8MHz / 30mV rms up to 10MHz / 20mV rms up to 80Hz/ 30mV rms up to 2.7GHz
- Auxiliary Power Supply: 220V AC 50Hz
12,600.00 ₹ 17,010.00 ₹
6 in stock
Technical data
Specification
Model
FC-2700
Brand
Metravi
Power
AC220V ±10%, 50Hz
Warranty
One year against manufacturing defects
Warm-up Time
20 minutes when cold started at 25ºC
Operating Temperature
-5ºC ~ + 50ºC
Storage Temperature Range
-40ºC ~ + 60ºC
Operating Humidity
10 ~ 90 % RH
Storage Humidity Range
40ºC ~ + 60ºC
Weight
2 kg
Time Base Frequency
110MHz
Short Term Stability
± 3 x 10-9 for 1s Average
Long Term Stability
2 x 10-5 month
CH - A Range
10Hz to 10MHz direct counter, 10MHz to 100MHz perscaled by proportion
CH- A Resolution
Direct counter : 1, 10, 100Hz switch selectable, Per scaled : 10, 100, 1000Hz switch selectable
CH- A Gate time
0.01s, 0.1s is switch selectable
CH - A Accuracy
± 1 count ± time base error x measured
CH- A Input Sensitivity
10 Mhz range : 10Hz ~ 8MHz 20m Vrms : 8MHz ~ 10MHz 30m Vrms, 100 Mhz Range : 10Hz ~ 8MHz 20m Vrms : 8MHz ~ 10MHz 30m Vrms
CH - A Impedance
Approx, 1M Ohmless then 35pF
CH- A Maximum voltage without damage
250v (DC + Acrms)
CH - B Range
100MHz – 2.7GHz
CH - B Resolution
10-7 s, 10-8 s, 10-9 s, switch selectable
CH - B Gate Time
0.01s, 0.1s, 1s
CH- B Accuracy
± 1 count ± time base error x measured frequency
CH - B Input Sensitivity
20m Vrms
CH - B Impedance
Approx. 5 Ohmless
CH - B Maximum voltage without damage
3V
Lowpass filter
AC 100kHz, 3dB
Output
Fixed 13MHz
Dimensions
240mm×205mm× 85mm Fixed 13MHz
Display
8 digits, 0.39 inch red LED display
Related products
-
CALIBRATOR, MV MA CALIBRATOR, MV MA CALIBRATOR WITH HART COMMUNICATION, MV MA WITH LOOP CALIBRATOR, Metravi
709H mV mA Loop Calibrator with HART Communication
CALIBRATOR, MV MA CALIBRATOR, MV MA CALIBRATOR WITH HART COMMUNICATION, MV MA WITH LOOP CALIBRATOR, Metravi709H mV mA Loop Calibrator with HART Communication
- Compact Loop Calibrator with HART communication
- Able to read basic device information and execute diagnostic tests
- High precision ±0.01%
- High resolution 0.001mA
- Automatic Ramp & Step
- High visibility 3.2″ TFT colour display with backlight
- Supports SCPI
- Auto Power Off and Low Battery display
- Max. permitted voltage: 30V (between any two terminals or between any terminal and earth ground)
- Operating temperature : 0°C ~ 50°C
- Operating relative humidity: ≤ 80%RH
- Protection level: IP65 (Dust, Water spray)
SKU: n/a -
CABLE FAULT LOCATOR, DIGITAL CABLE FAULT LOCATOR, Metravi
CFL-02 Digital Cable Fault Locator
- Pin Points Fault in all underground cables.
- Useful for Power, Control & Telecom Cables
- Maximum Cable Length 5kms
- Accuracy ±5%
- Faults located can be Medium/High Resistance Faults, Open Circuit and Short Circuit faults
- Two Techniques used
- Potential Comparison Technique
- Capacitance Comparison Technique
SKU: n/a -
CALIBRATOR, EARTH & GROUND TESTER CALIBRATOR, Metravi
CAL-ER Earth and Ground Tester Calibrator
- Connection: 4-wire method
- Insulation Resistance: 10MΩ above(between the circuit and shell 500V)
- Safety Standards: IEC61010-1，CAT Ⅲ 600V，Polluted Gradation
- Package includes: Meter, Test Leads (2 Black, 2 Red), Carry Bag, User Manual, Test Certificate
SKU: n/a -
CALIBRATOR, MV MA CALIBRATOR, MV MA WITH LOOP CALIBRATOR, Metravi
M-05S mV mA Loop Calibrator
- Power Supply: Internal 24V circuit power supply
- Maintenance setup functions
- Auto power-off
- Backlight
- LED Flashlight
- Segment code is displayed on the LCD with a white backlight.
- Power: 3 AA battery cells
- Low-battery detection
- Small, firm, reliable, suitable for field use
- Electrical safety: EN61010-1:2001
- Withstand voltage: AC3540V(50/60Hz)/5 seconds between terminal and housing.
- Insulation impedance: DC1000V/100MΩ or more between terminal and housing.
SKU: n/a
