-26%
ENVIRONMENTAL METER, ANEMOMETER, THERMO ANEMOMETER, MINI ENVIRONMENTAL TESTERS, Metravi
ET-99L Lux Meter
Availability:
6 in stock
- 4 Measuring Ranges in both Lux/FC
- High accuracy and rapid response
- Low battery Indication
- MAX/MIN mode
- REL measuring mode
- Data Hold mode
- Lux/FC unit switch
- Backlight can turn on and turn off
- Auto power-off (disabling option available)
- Range switch
- Auto and Manual range selection
- Tripod-mountable (tripod available at extra cost)
1,935.00 ₹ 2,612.00 ₹
6 in stock
CompareRelated products
-
Clamp Meter, Metravi
DT-1150 Digital AC Clamp Meter
- Diode and Continuity test
- Jaw Opening : Approx. 40mm
- Overload Protection
- CE CAT III 600V
- Dimension : 250(L) × 97(W) × 48(H) mm
- Weight : 345gm approx.(including battery)
- Power Supply : 3V (2pcs AAA Batteries)
- Working Environment : 0~40°C, 45% ~ 75% RH Non Condensing (When temperature is less than 10°C)
- Storage Environment : -10°C~50°C, RH is less than 80%
- Accessories : User Manual, Test Leads, 2pcs battery, Soft carry case
SKU: n/a -
Cable Fault Locator, Metravi
CFL-02 Digital Cable Fault Locator
- Pin Points Fault in all underground cables.
- Useful for Power, Control & Telecom Cables
- Maximum Cable Length 5kms
- Accuracy ±5%
- Faults located can be Medium/High Resistance Faults, Open Circuit and Short Circuit faults
- Two Techniques used
- Potential Comparison Technique
- Capacitance Comparison Technique
SKU: n/a -
Calibrator, Metravi
CAL-500 Universal Calibrator
- Hand Held, Battery Operated
- Extra Large LCD Display
- Displays both output and measurements
- In the output / measurement mode following are available:
- DC Voltage: 0 – 24mV / 100mV / 15V
- Accuracy: ±0.2%
- DC Current: 0 – 24mA
- Accuracy: ±0.2%
- Step wise output of 4/8/12/16/20/24mA
- Passive Current output: 0 – 24mA
- Accuracy: ±0.2%
- 24V Loop Power Output
SKU: n/a -
Calibrator, Metravi
11+ Universal Source Calibrator
- Provides 25% step or 100% step DC Current output current manually or Automatically.
- TC Source terminals and built in lead connector of same temperature, The unit can be converted between °C & °F
- Auto Power Off
- Display : 6 Digits white backlight LED on the LCD
- Technical Specifications
- DC voltage : 0 – 100mV/1V/10V
- Resolution : 1µV/10µV/0.1mV
- Accuracy : ±0.02%
- DC Current : 0 – 20mA
- Resolution : 1µA
- Accuracy : ±0.02%
SKU: n/a
