Shop
Showing 193–216 of 306 results
-
Earth resistance and resistivity meters, Sonel
MRU-30 Earth Resistance And Resistivity Meters
- Measurement of auxiliary electrode resistances RS and RH
- Measurement of interference voltage
- Measurement in the presence of interference voltages in networks with frequencies of 50 Hz and 60 Hz
- Selection of maximum measurement voltage (25 V and 50 V)
- In ground resistivity measurements, distances between electrodes can be input in meters (m) or feet (ft)
SKU: n/a -
ELECTRICAL SAFETY MEASUREMENTS, SHORT CIRCUIT LOOP MEASUREMENTS, Sonel
MZC-304F
- Fault loop impedance measurement with 0.01 Ω resolution.
- Low-current impedance measurement in circuits protected by RCD ≥ 30mA with 0.01 Ω resolution (range of 180…270 V)
- Operates in networks with voltages 220/380 V, 230 V/400 V, 240/415 V (operating range 180…460 V)
- Operating voltage range: 180…270 V (for ZL-PE and ZL-N) and 180…460 V (for ZL-L).
- Maximum measuring current: 7.6 A for 230 V (3×10 ms), 13.3 A for 400 V (3×10 ms).
- Operating frequency 45…65 Hz
- Calculation of Ik fault current.
- Measurement with swapped L and N conductors.
- Measurement of resistance (RS) and reactance (XS) components.
- Low-voltage measurement of continuity of circuit and resistance.
SKU: n/a -
Short Circuit Loop Measurements, Sonel
MZC-306
- Fault loop impedance measurement with 0.01Ω resolution
- Low-current impedance measurement in circuits protected by RCD ≥ 30mA with 0.01 Ω resolution (100…440 V)
- Operates in networks with voltages 110/190 V, 115/200 V, 127/220 V, 220/380 V, 230/400 V, 240/415 V, 290/500 V and 400/690 V (operating range 100…750 V)
- Operating frequency 45…65 Hz
- Calculation of fault current
- Automatic differentiation between phase and phase-to-phase voltage
- Possibility of applying 1.2, 5, 10, 20 m test leads or an adapter terminated by a power network plug
- Measurement with swapped L and N conductors
- Measurement of resistance (RS) and reactance (XS) components
SKU: n/a -
Short Circuit Loop Measurements, Sonel
MZC-330S
- Measurement of very low short circuit loop impedances (with resolution 0,1 mΩ) with a current of 130 A at 230 V; maximum 300 A at 690 V.
- Measurement with a current of 24 A at 230 V, maximum 37 A at 690 V with resolution 0,01 Ω.
- Measurements in installations with rated voltages: 110/190 V, 115/200 V, 127/220 V, 220/380 V, 230/400 V, 240/415 V, 290/500 V and 400/690 V and frequencies 45…65 Hz.
- Ability to perform measurements in short circuit system: phase-phase, phase-PE, phase-N.
- Differentiation between the phase voltage and the inter-phase voltage while calculating the short circuit current.
- Ability to change the length of test lead (measurement with 2p method).
- 4p (four-pole) method, test leads do not require calibration (measurement with current up to 300 A).
- Measurement of resistance (RS) and reactance (XS) components.
SKU: n/a -
Metravi, OSCILLOSCOPE, ANALOGUE OSCILLOSCOPE
OS-5010A Analogue Oscilloscope
- Single Channel Single Trace Oscilloscope
- Bandwidth: 10MHz
- Confirms to EN61010-1 (1993) and EN-IEC61326-1(1997)
- Wide measurement
- High sensitivity and trigger lock
- Sweep switch adopts digital code switch and accuracy
- Proper to use in colleges and for engineers and technicians
- Deflection factor is 5mV~5V/div in 1-2-5 Sequence in 10 steps
- Accuracy: ±5%
- Maximum Input Voltage: 400Vpk
- Sweep deflection factor is 0.1us/div-0.1s/div
SKU: n/a -
Metravi, POWER GUARD / ENERGY METER
PG-01 Power Guard and Energy Meter
- Multifunction Power Meter
- Works on 6A / 230V AC
- Displays Voltage, Current, Power, Power Factor, Frequency, KWh, CO2, Cost of running the equipment.
- Calculates total time consumed
- Calculates cost of electricity consumed
- Retains the readings while load shedding
- Voltage: 100V AC ~ 260V AC
- Current: upto 6A
- Power: 0.5 – 1380W
SKU: n/a -
DIFFERENTIAL PRESSURE MANOMETER, Metravi
PM-01 Differential Pressure Manometer
- Differential Pressure Manometer
- Backlit LCD Dual Display
- Low Battery Indication
- Under Range and Over Range Indication
- Fast Response Time
- Battery Operated
- Measuring Range: 0 – 5 PSI
- It measures in various units like inH2O, PSI, bar, mbar, kPa, inHg, mmHg, OZin2, ftH2O, cmH2O, kgcm2.
- With RS-232 PC Interface Facility
- High Accuracy of 0.3%
SKU: n/a -
Calibrator, Metravi
PM-29 Process Meter
- Digital Process Calibrator cum Multimeter
- Display: Backlit LCD, 4 digit display for measurement, 5 digit display for output
- Confirms to IEC61010-1 (CATIV 600V, CATIII 1000V, Pollution Level II
- Overload Protection
- Surge Protection
- Developed, designed and produced according to ISO 9001
SKU: n/a -
Power Quality Analysis, Sonel
PQM-700 Power Quality Analysis
- 4 current inputs, physical measurement of current in the neutral conductor.
- Registration of up to 1100 parameters, including average, maximum, minimum and instantaneous values.
- Built-in heater, stable operation at low temperatures down to -20ºC.
- Internal rechargeable battery, autonomy of the meter (min. 6 hours).
- IP65 ingress protection, possibility of work in rain, snow and high humidity
SKU: n/a -
Power Quality Analysis, Sonel
PQM-707 Power Quality Analysis
- 7” touchscreen – ergonomic and intuitive graphical user interface.
- Over 10 years of recording.
- CAT IV 600 V measurement category – high safety.
- All parameters according to class S – high accuracy of measurements.
- Li-Ion rechargeable battery – higher mobility.
- Powering from measured network – reliability of measurements.
- Removable memory card – recording data with no restrictions.
- Quick setup and reporting – ease of use.
- Cooperation with desktop Sonel Analysis software – extended data analysis.
SKU: n/a -
Power Quality Analysis, Sonel
PQM-711 Power Quality Analysis
- Remote control and data transfer through a built-in GSM modem.
- Anti-theft feature – SMS notification in the event of position change (built-in GPS receiver).
- Real-time clock synchronized to GPS protocol.
- Remote control of the analyzer via software: Sonel Analysis (Wi-Fi and GSM for Windows) or Sonel Analysis Mobile (Wi-Fi for Android).
SKU: n/a -
-
-
Clamp Meter, Metravi
PRO 419 Digital TRMS AC/DC Clamp Meter
- Professional T-RMS AC/DC Clamp Meter
- 4000 Counts, 3-3/4 Digits Backlit LCD Display
- Confirms to CAT-IV 600V, CAT-III 1000V, CE, IEC-61010-1
- 600V AC/DC Protection in all ranges
- 34 mm Clamp Jaw Dia
- Auto Power Off
- Non Contact Voltage Detector
- Flash light in the Jaw to access dark Areas
- Double Injection Housing, providing double insulation
- Data Hold, MAX-MIN Record, Relative Measurement
SKU: n/a -
Metravi, MICROOHMS METER, 10A MICROOHMS METER
PRO 7273 10A Microohms Meter
- Test Current Range: Auto, 1mA, 10mA, 100mA, 1A, 5A, 10A
- Measurement Range: 1.0uΩ~50.00kΩ
- Accuracy: 0.2%±2uΩ
- Max. Resolution: 0.1uΩ
- Test Method: Precision 4-wire method, 2-channel A/D simultaneous detection
- Test Modes: Auto, Manual
- Power Supply: Mains, Rechargeable Battery
- Sampling AD Rate: 1s/ time
- Alarm function with settings
- Overflow indication
- Overcharge indication
- Low Voltage indication
SKU: n/a -
Acoustic Imager, Metravi, METRAVI PRO SERIES
PRO AI-09EX Industrial Acoustic Imager
- Microphone Array: 128 channels MEMS microphone
- Test sound pressure level range: 25.7-132.5dBA
- Sound image frame rate: At least 25 FPS
- Sound image FoV: 62°
- Leak detection rate: 10m 5bar , 0.92ml/s and 0.5m 5bar , 0.55ml/s
- Detection distance: 0.3m-120m
- Camera Resolution: 8 million pixels
- Display: 7″ Capacitative Touchscreen with adjustable brightness
- Display Resolution: 1024*600 (614,400 pixels)
- Playback function: View photos, videos anytime, and add notes or tags
- Interfaces: USB 3.0 Type-C USB host port, 3.5mm headphone socket
- Internal & External Storage
SKU: n/a -
INSULATION TESTER, DIGITAL INSULATION TESTER, HIGH VOLTAGE INSULATION TESTER, METRAVI PRO SERIES, SOLAR TOOLS, 5KV DIGITAL INSULATION TESTER, Metravi
PRO DIT-925 5kV High Voltage Insulation Resistance Tester
INSULATION TESTER, DIGITAL INSULATION TESTER, HIGH VOLTAGE INSULATION TESTER, METRAVI PRO SERIES, SOLAR TOOLS, 5KV DIGITAL INSULATION TESTER, MetraviPRO DIT-925 5kV High Voltage Insulation Resistance Tester
- Max Output Voltage 5KV
- Max Test Resistance 5TΩ
- Max Short Circuit Current 5mA
- Polarisation Index Test (PI)
- Dielectric Absorption Ratio Test (DAR)
- Ramp Test Mode (RAMP)
- Filtered Resistance Test Mode (FR)
- Large Capacity Rechargeable Lithium Battery
- USB Data Upload Function
- Voltage monitor function – automatically monitor live voltage of the test object.
- Test timer function – automatically record test time.
- Automatic discharge function – after the test automatically releases the charge of the test object.
SKU: n/a -
ELECTRICAL TESTER, Metravi
PRO ELEC+ Voltage Detector and Electrical Tester
- 1999 counts (3 1/2 digits) LCD display with back-light
- Built-in Flashlight for working in low-light or dark boxes and spaces
- Automatically detects AC/DC Voltage
- Voltage Range: 6V to 1000V AC/DC
Resolution: 1V AC/DC
Tolerances:±3.0% of reading ±5 digit - LED display for AC/DC Voltage values along with numeric display
- LED Voltage Range: 12V to 1000V AC/DC
Response Time:≤1 second - AC Voltage bandwidth 400Hz
- Frequency Range: 0/40Hz to 400Hz
- Auto Polarity indication
SKU: n/a -
Clamp Meter, Metravi
PRO HCM-60 AC Leakage Current Clamp with Harmonics
- Data Storage: 2000 groups (through Mobile App)
- Interface: Bluetooth
- Automatic Shutdown
- Insulation: AC3700V/rms (Between iron core and shell)
- Safety: IEC1010-1, IEC1010-2-032, Pollution 2, CAT III (600V)
- Power Supply: 1000 mAh Rechargeable Battery
SKU: n/a -
Metravi, ROTATING MACHINE TESTER, METRAVI PRO SERIES, EV & MOTOR TOOLS, MOTOR TESTING TOOLS
PRO RMT-10 Rotating Machine Tester
Metravi, ROTATING MACHINE TESTER, METRAVI PRO SERIES, EV & MOTOR TOOLS, MOTOR TESTING TOOLSPRO RMT-10 Rotating Machine Tester
- Temperature -50°C to 1200°C
- Bluetooth for sharing data with Smartphone and free App to share, store and analyse data
- Surge Protection: 8kV peak per IEC 61010
- Enclosure Double-moulded, waterproof Shock (Drop Test) 3.2 feet (1m)
- Diode Test Test current of 0.9mA maximum , open circuit voltage 2.8V DC typical
- Continuity Check: Audible signal will sound if the resistance is less than 50W (approx.), test current <0.35mA
- PEAK: Captures peaks >1ms
- Temperature Sensor requires type K thermocouple
- Input Impedance >10MΩ VDC & >9MΩ VAC
- AC Response True RMS
- ACV Bandwidth 50Hz to 1000Hz
- Crest Factor ≤3 at full scale up to 500V, decreasing linearly to ≤1.5 at 1000V
- Overrange indication “OL” is displayed
- Auto Power Off 15 minutes (approximately) with disable feature
SKU: n/a -
Clamp Meter, Metravi
Pro Solar-2A Digital TRMS AC/DC Clamp Meter
- Display: 3-3/4 digits (4000 counts) backlit LCD
- Jaw Opening: 2” (52mm) approx.
- PV DC Voltage: 400mV / 4V / 40V / 400V / 1500V
- Accuracy: ± (1% + 3d)
- AC Voltage T-RMS: 4V / 40V / 400V / 1000V
- Accuracy: ± (1.2% + 5d)
- Diode Testing
- Continuity Test
- Over-range Protection
- Auto-ranging
SKU: n/a -
Metravi, MULTIMETER, DIGITAL MULTIMETER, DIGITAL TRMS MULTIMETER, DIGITAL TRMS MULTIMETER WITH BLUETOOTH, DIGITAL MULTIMETER WITH THERMAL IMAGER
PRO TIM-900 Professional Multimeter with Thermal Imager
Metravi, MULTIMETER, DIGITAL MULTIMETER, DIGITAL TRMS MULTIMETER, DIGITAL TRMS MULTIMETER WITH BLUETOOTH, DIGITAL MULTIMETER WITH THERMAL IMAGERPRO TIM-900 Professional Multimeter with Thermal Imager
- Bluetooth for data transfer to Smartphone App
- DC Voltage: 400.0mV/4.000V/40.00/400.0/600V
- Accuracy: ± (0.5% reading + 5 digits)
- AC TRMS Voltage: 4.000V/40.00/400.0/600V
- Accuracy: ± (1.0% reading +5 digits)
- AC+DC TRMS Voltage: 4.000V/40.00/400.0/600V
- Accuracy: ± (2.5% reading +20 digits)
- Double Moulding, Double Insulation
- Auto Ranging
- Auto Power-off
- Built-in flashlight to access dark areas
SKU: n/a -
