-26%
DIFFERENTIAL PRESSURE MANOMETER, Metravi
PM-01 Differential Pressure Manometer
Availability:
6 in stock
- Differential Pressure Manometer
- Backlit LCD Dual Display
- Low Battery Indication
- Under Range and Over Range Indication
- Fast Response Time
- Battery Operated
- Measuring Range: 0 – 5 PSI
- It measures in various units like inH2O, PSI, bar, mbar, kPa, inHg, mmHg, OZin2, ftH2O, cmH2O, kgcm2.
- With RS-232 PC Interface Facility
- High Accuracy of 0.3%
11,655.00 ₹ 15,734.00 ₹
6 in stock
CompareRelated products
-
Calibrator, Metravi
M-05S mV mA Loop Calibrator
- Power Supply: Internal 24V circuit power supply
- Maintenance setup functions
- Auto power-off
- Backlight
- LED Flashlight
- Segment code is displayed on the LCD with a white backlight.
- Power: 3 AA battery cells
- Low-battery detection
- Small, firm, reliable, suitable for field use
- Electrical safety: EN61010-1:2001
- Withstand voltage: AC3540V(50/60Hz)/5 seconds between terminal and housing.
- Insulation impedance: DC1000V/100MΩ or more between terminal and housing.
SKU: n/a -
Calibrator, Metravi
CAL-500 Universal Calibrator
- Hand Held, Battery Operated
- Extra Large LCD Display
- Displays both output and measurements
- In the output / measurement mode following are available:
- DC Voltage: 0 – 24mV / 100mV / 15V
- Accuracy: ±0.2%
- DC Current: 0 – 24mA
- Accuracy: ±0.2%
- Step wise output of 4/8/12/16/20/24mA
- Passive Current output: 0 – 24mA
- Accuracy: ±0.2%
- 24V Loop Power Output
SKU: n/a -
Calibrator, Metravi
CE-0102TMC Non-Contact Tachometer Calibrator
- Easy to use calibrator for instant and reliable calibration of Non -Contact tachometers up to 199999 RPM
- The desired RPM can easily be set using the front panel switches
- Since RPM is a function of the frequency,the bright White LED flashes at avalue nearest to the set RPM and the actual RPM/Frequency is displayed on the 2 Line Backlit alpha numeric LCD display
- The actual RPM/Frequency is displayed on the 2 Line Backlit alpha numeric LCD display
SKU: n/a -
Calibrator, Metravi
709H mV mA Loop Calibrator with HART Communication
- Compact Loop Calibrator with HART communication
- Able to read basic device information and execute diagnostic tests
- High precision ±0.01%
- High resolution 0.001mA
- Automatic Ramp & Step
- High visibility 3.2″ TFT colour display with backlight
- Supports SCPI
- Auto Power Off and Low Battery display
- Max. permitted voltage: 30V (between any two terminals or between any terminal and earth ground)
- Operating temperature : 0°C ~ 50°C
- Operating relative humidity: ≤ 80%RH
- Protection level: IP65 (Dust, Water spray)
SKU: n/a
