-26%
Metravi, ROTATING MACHINE TESTER, METRAVI PRO SERIES, EV & MOTOR TOOLS, MOTOR TESTING TOOLS
PRO RMT-10 Rotating Machine Tester
Availability:
6 in stock
- Temperature -50°C to 1200°C
- Bluetooth for sharing data with Smartphone and free App to share, store and analyse data
- Surge Protection: 8kV peak per IEC 61010
- Enclosure Double-moulded, waterproof Shock (Drop Test) 3.2 feet (1m)
- Diode Test Test current of 0.9mA maximum , open circuit voltage 2.8V DC typical
- Continuity Check: Audible signal will sound if the resistance is less than 50W (approx.), test current <0.35mA
- PEAK: Captures peaks >1ms
- Temperature Sensor requires type K thermocouple
- Input Impedance >10MΩ VDC & >9MΩ VAC
- AC Response True RMS
- ACV Bandwidth 50Hz to 1000Hz
- Crest Factor ≤3 at full scale up to 500V, decreasing linearly to ≤1.5 at 1000V
- Overrange indication “OL” is displayed
- Auto Power Off 15 minutes (approximately) with disable feature
34,400.00 ₹ 46,440.00 ₹
6 in stock
CompareRelated products
-
Calibrator, Metravi
709H mV mA Loop Calibrator with HART Communication
- Compact Loop Calibrator with HART communication
- Able to read basic device information and execute diagnostic tests
- High precision ±0.01%
- High resolution 0.001mA
- Automatic Ramp & Step
- High visibility 3.2″ TFT colour display with backlight
- Supports SCPI
- Auto Power Off and Low Battery display
- Max. permitted voltage: 30V (between any two terminals or between any terminal and earth ground)
- Operating temperature : 0°C ~ 50°C
- Operating relative humidity: ≤ 80%RH
- Protection level: IP65 (Dust, Water spray)
SKU: n/a -
Battery Impedance Tester, Solar Tools, Metravi
TM-6002 Battery Impedance Tester
- Large Backlit LCD Display
- Data Logging up to 9999 sets
- Resistance Measurement: 10uΩ to 40Ω
- Voltage Measurement: 1mV to 40V
- Temperature Measurement: -20° to 60°C
- DC Current Measurement: 0.6A to 700A DC
- Measures internal impedance and open circuit voltage of the secondary batteries, including Nickel-metal Hydride (NiMH), Nickel-cadmium (NiCd), Lithium-ion (Li-ion), Alkaline and Lead-acid batteries.
- AC four-terminal method to measure the internal impedance by eliminating lead impedance and contact impedance to get accurate results.
SKU: n/a -
Acidity Testing Kit, Metravi
ATK Acidity Testing Kit
- Used to measure Acidity content of Transformer Oil
- Portable equipment with test tubes to conduct the tests
- A set of chemical reactions need to be conducted to evaluate acidity of transformer oil
- Test Set consists of Ethyl Alcohol, Sodium Carbonate Solution, Universal Indicator, Test Tubes, Graduated Dropper
- Color chart calibrated with neutralization number values and instruction manual is also provided.
SKU: n/a -
Calibrator, Metravi
CAL-600 Universal Calibrator
- Hand Held, Battery Operated
- Extra Large LCD Display
- Displays both output and measurements
- In the output / measurement mode following are available:
- DC Voltage: 0 – 24mV / 100mV / 15V
- Accuracy: ±0.2%
- DC Current: 0 – 24mA
- Accuracy: ±0.2%
- Step wise output of 4/8/12/16/20/24mA
- Passive Current output: 0 – 24mA
- Accuracy: ±0.2%
- 24V Loop Power Output
- Resistance Source: 15Ω ~ 400Ω
- Resistance Measurement: 0Ω ~ 400Ω
- Accuracy: ±0.2%
SKU: n/a
