Shop
Showing 73–96 of 303 results
-
Clamp Meter, Metravi
DT-369 TRMS AC Clamp Meter
- Display: 6000 Counts LCD
- T-RMS
- Auto Power Off
- Flame Sensor Current measurement
- Relative Measurement
- Clamp Jaw Dia: 30mm
- Display : LCD display.
- MAX. Display : 5999 digits (3 5/6) auto polarity display.
- Measuring method : ADC+MCU.
- Sampling rate : 3times/second.
- Overload display : “OL” displayed
SKU: n/a -
Clamp Meter, Metravi
DT-4250 Digital AC/DC Clamp Meter
- Data Hold Facility
- Double molded body with rubber coating
- Clamp Jaw Size: 30mm
- Display : 3-3/4 Digital 3999 Counts Backlit LCD
- DC Voltage : 0 – 400m/4/40/400/600V.
- Accuracy : ±0.8%
- Diode Test and Continuity Test
- Confirms to CE, IEC 61010, CAT-III 600V
SKU: n/a -
Clamp Meter, Metravi
DT-425T Digital TRMS AC/DC Clamp Meter
- 3-3/4 Digits 3999 Counts Backlit LCD Display
- Built-in Flash light to access dark Areas
- Non Contact Voltage Detector to show the presence of Voltage
- Sleek Ergonomic Design
- Confirms to IEC/EN 61010-1, IEC/EN 61010-2-032 & IEC/EN 61010-2-033
- Confirms to UL, CAT-III 600V
- Data Hold to Freeze Displayed Data
- MAX-MIN record function
- Relative measuring facility
- 30mm Jaw Dia
- Overload indication
SKU: n/a -
Clamp Meter, Metravi
DT-4671 AC Leakage Current Clamp Meter
- Auto Power Off
- Max / Min recording with Data Hold
- Clamp Jaw Size : 30mm
- Display : 3-3/4 Digits 3999 Counts LCD with 40 Segment analog Bargraph
- AC Voltage : 0 – 400V
- Accuracy : ±1.5%
- AC Current : 0 – 40m/400m/4A/40A/80A/100A
- Accuracy : ±1.0%
- Resistance : 40 – 400 Ohms
- Accuracy : ±1.0%
- Low Pass Filter for eliminating effect of High Frequency Noise.
SKU: n/a -
-
EMF / GAUSS METER, Metravi
EMF-823 Magnetic Field EMF ELF Meter
- Display: 3-1/2 digits LCD, maximum reading 1999.
- Range: 200/2000 mG,20/200µT.
- Resolution: 0.1/1 mG or 0.01/0.1 µT.
- Frequency response: 30Hz to 300Hz.
- Sensor: Single Axis
- Accuracy: ±(2.5%±6dgt) at 50Hz/60Hz.
- Over load Indication
- Battery: 9V
SKU: n/a -
EARTH/GROUND RESISTANCE TESTER, EARTH RESISTANCE TESTER, Metravi
ERT-1501 Digital Earth Resistance Tester with Kit
EARTH/GROUND RESISTANCE TESTER, EARTH RESISTANCE TESTER, MetraviERT-1501 Digital Earth Resistance Tester with Kit
- Data Hold facility
- Displays test result and battery voltage on the same screen
- LOCK Button for continuous HANDS FREE measurement
- Both Earth Resistance and Earth Resistivity can be measured
- Can be used in 4 Terminal and 3 Terminal configurations
- Display : 4 Digits EXTRA LARGE Backlit Dual LCD Display
- Earth Resistance Range : 0 – 10/100/1000 Ohms
- Accuracy : ±3% + 2d
- Low Resistance Range : 0 – 200 k.Ohms
SKU: n/a -
Anemometer, Metravi
ET-99A Thermo Anemometer
- Range : 0 ~ 3000mT (milli Tesla) / 0~30000G (Gauss)
- Unit Conversion : 1mT=10G(Gauss)
- Can display the N/S polarity of DC magnets
- Relative / Peak Hold / Real time Zero function
- USB PC interface, with software
- Power : 9V AAA*6
- Operating temperature and humidity: 5°C ~ 40°C
- External AC 100 ~ 240V to DC 9V/0.5A power supply
SKU: n/a -
ENVIRONMENTAL METER, ANEMOMETER, THERMO ANEMOMETER, MINI ENVIRONMENTAL TESTERS, Metravi
ET-99L Lux Meter
ENVIRONMENTAL METER, ANEMOMETER, THERMO ANEMOMETER, MINI ENVIRONMENTAL TESTERS, MetraviET-99L Lux Meter
- 4 Measuring Ranges in both Lux/FC
- High accuracy and rapid response
- Low battery Indication
- MAX/MIN mode
- REL measuring mode
- Data Hold mode
- Lux/FC unit switch
- Backlight can turn on and turn off
- Auto power-off (disabling option available)
- Range switch
- Auto and Manual range selection
- Tripod-mountable (tripod available at extra cost)
SKU: n/a -
ENVIRONMENTAL METER, MOISTURE METER, PIN-TYPE MOISTURE METER, MINI ENVIRONMENTAL TESTERS, Metravi
ET-99M Pin-type Moisture Meter
ENVIRONMENTAL METER, MOISTURE METER, PIN-TYPE MOISTURE METER, MINI ENVIRONMENTAL TESTERS, MetraviET-99M Pin-type Moisture Meter
A professional conductivity moisture tester that uses pin probe sensors to determine the moisture content of solid materials like plastic, concrete, and mortar as well as wood, sawn lumber, cardboard, and paper.
SKU: n/a -
ENVIRONMENTAL METER, SOUND LEVEL METER, MINI ENVIRONMENTAL TESTERS, Metravi
ET-99SL Sound Level Meter
ENVIRONMENTAL METER, SOUND LEVEL METER, MINI ENVIRONMENTAL TESTERS, MetraviET-99SL Sound Level Meter
- Standards Applied : IEC61672-1 CLASS 2
- Frequency Range : 31.5Hz to 8kHz
- Measuring Level Range : 30 to 130dB
- Frequency Weighting : A
- Microphone :1/2 inch electret condenser microphone
- Display : LCD 3-1/2 digits
- Resolution : 0.1dB
- Display Up Data : 0.5 secs
- Time Weighting : FAST (125mS), SLOW (1000mS)
- Accuracy : ± 1.5 dB (at 1kHz, Standard-Audioquelle)
- Alarm Function
- Auto Power Off
SKU: n/a -
DIGITAL PANEL METER, FREQUENCY COUNTER, Metravi
FC-2700 Frequency Counter
- Bench Type
- 8 Digit RED LED Display
- Dual Channel Input
- Range: up to 2.7GHz
- Resolution: 100Hz
- Accuracy: ±1%
- Sensitivity: 20mV rms up to 8MHz / 30mV rms up to 10MHz / 20mV rms up to 80Hz/ 30mV rms up to 2.7GHz
- Auxiliary Power Supply: 220V AC 50Hz
SKU: n/a -
FUNCTION GENERATOR, DIGITAL FUNCTION GENERATOR, Metravi
FG-1000 Digital Function Generator
- Frequency of the mode: 0.1Hz—1MHz
- Output waveform: Sine, Triangle, Square, ±Ramp, ±Pulse
- TTL/CMOS and OUTPUT synchronous output
- Voltage Control Frequency (VCF) Capacity
- Less than 1% distortion at 10Hz– 100 KHz
- Less than 0.5dB frequency response at 0.1Hz— 100 KHz
- Frequency Counter: 1Hz—30MHz
- Amplitude: Not less than 20V p–p (open circuit)
- DC Voltage: 0–±10V continuously adjustable
SKU: n/a -
FLIR, Handheld Thermal Cameras
FLIR TG165-X
- Model TG165-X – 4,8000 pixel IR camera measures temperatures from -25°C to 300°C (-13°F to 572°F)
- ULTRA CLEAR IMAGES – Patented MSX embosses visual details on the thermal image to create sharper, easier to understand picture
- LASER POINTER – Indicates the size of the measurement area for faster and easier detection
- RUGGED AND RELIABLE- Tough, drop-tested design with an IP54 enclosure that protects the camera from dirt, dust, and oil.
- BATTERY LIFE – Rechargeable Li-Ion batter lasts for 5 hours or continuous use
SKU: n/a -
-
-
-
FLUKE, Fluke Digital Multimeters
Fluke 116 Digital HVAC Multimeter
- Digital multimeter designed specifically for HVAC professionals
- Includes built-in thermometer to measure temperature from -40°C to 400°C (-40°F to 752°F)
- Provides microamps to test flame sensors
- Features low input impedance to helps prevent false readings due to ghost voltage
- Presents a large white LED backlight for working in poorly lit areas
SKU: n/a -
Electrical tools, FLUKE
Fluke 117 Electrician’s Multimeter with Non-Contact Voltage
- Compact, true-rms digital multimeter for electricians
- Includes multimeter, 4mm silicone test leads, holster and manual
- Integrated non-contact voltage detection keeps you safe
- Prevent false readings from ghost voltage with selectable low-impedance mode
SKU: n/a -
Electrical tools, FLUKE
Fluke 1503 Insulation Resistance Meter
- A rugged, compact insulation resistance tester for residential and commercial electricians
- Performs insulation tests from 0.01 MΩ to 2000 MΩ
- Offers two insulation test voltages: 500 V and 1000 V
- Includes live circuit detection to prevent insulation test if voltage >30 V is detected
- Measures resistance from 0.01 Ω to 20.00 kΩ
SKU: n/a -
Electrical tools, FLUKE
Fluke 1507 Insulation Resistance Tester
- Rugged, compact advanced insulation resistance tester for electrical contractors and industrial and commercial electricians
- Automatically calculates Polarization Index and Dielectric Absorption Ratio
- Makes repetitive tests simple and easy with a Compare (Pass/Fail) function
- Offers multiple insulation test voltages: 50 V, 100 V, 250 V, 500 V, and 1000 V
SKU: n/a
