-26%
Data Logger, Metravi
DL-SL-01 Sound Level Data Logger
Availability:
6 in stock
- This unit confirms to the IEC61672-1 CLASS2 for Sound Level Meter.
- NORM (Normal) & PEAK mode
- Data manage: STORE, REAL TIME
- Over range indication
- A & C Weighting
- FAST & SLOW response
- Software Calibration
- Manual & Automatic Start Modes
- Measurement Range: 30dB to 130dB
- Sampling Rate: Settable from 1 Sec. to 24 Hours.
- With USB PC Interface Cable and Software
12,911.00 ₹ 17,430.00 ₹
6 in stock
CompareRelated products
-
Battery Impedance Tester, Solar Tools, Metravi
TM-6002 Battery Impedance Tester
- Large Backlit LCD Display
- Data Logging up to 9999 sets
- Resistance Measurement: 10uΩ to 40Ω
- Voltage Measurement: 1mV to 40V
- Temperature Measurement: -20° to 60°C
- DC Current Measurement: 0.6A to 700A DC
- Measures internal impedance and open circuit voltage of the secondary batteries, including Nickel-metal Hydride (NiMH), Nickel-cadmium (NiCd), Lithium-ion (Li-ion), Alkaline and Lead-acid batteries.
- AC four-terminal method to measure the internal impedance by eliminating lead impedance and contact impedance to get accurate results.
SKU: n/a -
Calibrator, Metravi
CAL-ER Earth and Ground Tester Calibrator
- Connection: 4-wire method
- Insulation Resistance: 10MΩ above(between the circuit and shell 500V)
- Safety Standards: IEC61010-1，CAT Ⅲ 600V，Polluted Gradation
- Package includes: Meter, Test Leads (2 Black, 2 Red), Carry Bag, User Manual, Test Certificate
SKU: n/a -
Cable Fault Locator, Metravi
CFL-02 Digital Cable Fault Locator
- Pin Points Fault in all underground cables.
- Useful for Power, Control & Telecom Cables
- Maximum Cable Length 5kms
- Accuracy ±5%
- Faults located can be Medium/High Resistance Faults, Open Circuit and Short Circuit faults
- Two Techniques used
- Potential Comparison Technique
- Capacitance Comparison Technique
SKU: n/a -
Calibrator, Metravi
M-05S mV mA Loop Calibrator
- Power Supply: Internal 24V circuit power supply
- Maintenance setup functions
- Auto power-off
- Backlight
- LED Flashlight
- Segment code is displayed on the LCD with a white backlight.
- Power: 3 AA battery cells
- Low-battery detection
- Small, firm, reliable, suitable for field use
- Electrical safety: EN61010-1:2001
- Withstand voltage: AC3540V(50/60Hz)/5 seconds between terminal and housing.
- Insulation impedance: DC1000V/100MΩ or more between terminal and housing.
SKU: n/a
