Shop
Showing 25–48 of 304 results
-
Acidity Testing Kit, Metravi
ATK Acidity Testing Kit
- Used to measure Acidity content of Transformer Oil
- Portable equipment with test tubes to conduct the tests
- A set of chemical reactions need to be conducted to evaluate acidity of transformer oil
- Test Set consists of Ethyl Alcohol, Sodium Carbonate Solution, Universal Indicator, Test Tubes, Graduated Dropper
- Color chart calibrated with neutralization number values and instruction manual is also provided.
SKU: n/a -
Controllers, Novus, Process Control & Indication
Auto-Adaptive PID Controller N1200
- Auto-Adaptive PID algorithm for fast and precise control in dynamic processes.
- Fastest sampling rate among competitors for highly responsive PID control.
- Electronic robustness and flame-resistant enclosure with industry approvals.
- USB port configuration via free NOVUS software for easy setup.
- Customizable ramp and soak profiles with up to 20 user-configured recipes or 180 segments.
SKU: n/a -
Controllers, Novus, Process Control & Indication
Auto-Adaptive PID Controller N1200
- Auto-Adaptive PID algorithm for fast and precise control in dynamic processes.
- Fastest sampling rate among competitors for highly responsive PID control.
- Electronic robustness and flame-resistant enclosure with industry approvals.
- USB port configuration via free NOVUS software for easy setup.
- Customizable ramp and soak profiles with up to 20 user-configured recipes or 180 segments.
SKU: n/a -
Controllers, Novus, Process Control & Indication
Automated IoT Solutions: N20K48 Modular Controller
- IoT Connectivity – Supports Wi-Fi, Bluetooth, and USB for remote monitoring and configuration.
- High-Precision PID Control – Self-adaptive control for temperature, pressure, humidity, and flow.
- Easy Configuration – Quick Tune Software with Wi-Fi, Bluetooth, or USB for seamless setup.
- Modular & Scalable – Expandable micromodules for flexible control and communication.
- Industrial Integration – Compatible with thermocouples, RTDs, and various measurement devices.
SKU: n/a -
Anemometer, Metravi
AVM-04 Thermo Anemometer
- Displays Air Velocity and Temperature at the same time
- Highly Sensitive and accurate
- Temperature Sensor Built-in with anemometer fan
- Low Power Consumption
- Data / Max / Min. Hold facility
- Auto Power Off
- Low Friction Ball bearing vane wheel for high accuracy
- Extra Large Dual LCD Display
- Range of wind speed in m/s: 0.0 to 45.0 m/s with an accuracy of ±3%
- Range of wind speed in knots: 0.0 to 88.0 knots with an accuracy of ±3%
SKU: n/a -
Air flow and velocity transmitters, HK
AVT-Air Velocity Transmitter
- Separate readings and outputs for air velocity and temperature
- Proportional output options: voltage (0…10 V) and current (4…20 mA)
- PID controller for air velocity (-D models)
- Three fields selectable measurement ranges for air velocity, selectable with jumpers (models without display)
- Freely selectable measurement range for air velocity via menu (-D models)
- Air velocity: m/s, ft/min
- Temperature: Celsius, Fahrenheit
SKU: n/a -
Calibrator, Metravi
BB-500 Infrared Thermometer Black Body Calibrator
- Black Body is used to calibrate infrared thermometers
- Easily certify infrared thermometers up to 500°C (932°F)
- RTD Reference Well for high precision
- Small compact design
- Temperature Range : 50°C ~ 500°C (122°F ~ 932°F)
- Heating Time : 30 minutes to max
- Cooling Time : 30 minutes to 100 °C (122°F)
- Aperture Diameter : 58mm
- Power : 220VAC(±10%), 1.25A / 110VAC(±10%),2.5A
- Complete with carrying case and instruction manual
SKU: n/a -
Metravi, MULTIMETER, CLAMP-ON CURRENT ADAPTOR FOR MULTIMETER
CA-01 AC Clamp-on Current Adapter for Digital Multimeter
Metravi, MULTIMETER, CLAMP-ON CURRENT ADAPTOR FOR MULTIMETERCA-01 AC Clamp-on Current Adapter for Digital Multimeter
- Can be used with any Digital Multimeter with 200mV / 400mV / 600mV AC range
- Can measure AC Current up to 200A (cannot measure DC current)
- Provides output of 1mV/A
- Sensitivity: 1A/mV AC
- Accuracy: ±2%
- Clamp Jaw Size:16mm Dia.
SKU: n/a -
Calibrator, Metravi
CAL-400-3 mV mA Calibrator
- Consists of a transmitter and a receiver
- Used to detect or trace conductors and to find short faults in them.
- Conductor tracing in the soil
- Detecting fuses and assigning current circuits
- Tracing sockets and distribution sockets having accidentally been covered by plastering
- Detecting interruptions and short-circuits in floor heating
- Tracing metallic water and heating piping
- Automatic and manual sensitivity adjustment
- Acoustic reception signal may be switched off
- Auto-Power-Off function
- Backlit LCD
SKU: n/a -
-
Calibrator, Metravi
CAL-500 Universal Calibrator
- Hand Held, Battery Operated
- Extra Large LCD Display
- Displays both output and measurements
- In the output / measurement mode following are available:
- DC Voltage: 0 – 24mV / 100mV / 15V
- Accuracy: ±0.2%
- DC Current: 0 – 24mA
- Accuracy: ±0.2%
- Step wise output of 4/8/12/16/20/24mA
- Passive Current output: 0 – 24mA
- Accuracy: ±0.2%
- 24V Loop Power Output
SKU: n/a -
Calibrator, Metravi
CAL-600 Universal Calibrator
- Hand Held, Battery Operated
- Extra Large LCD Display
- Displays both output and measurements
- In the output / measurement mode following are available:
- DC Voltage: 0 – 24mV / 100mV / 15V
- Accuracy: ±0.2%
- DC Current: 0 – 24mA
- Accuracy: ±0.2%
- Step wise output of 4/8/12/16/20/24mA
- Passive Current output: 0 – 24mA
- Accuracy: ±0.2%
- 24V Loop Power Output
- Resistance Source: 15Ω ~ 400Ω
- Resistance Measurement: 0Ω ~ 400Ω
- Accuracy: ±0.2%
SKU: n/a -
Calibrator, Metravi
CAL-ER Earth and Ground Tester Calibrator
- Connection: 4-wire method
- Insulation Resistance: 10MΩ above(between the circuit and shell 500V)
- Safety Standards: IEC61010-1，CAT Ⅲ 600V，Polluted Gradation
- Package includes: Meter, Test Leads (2 Black, 2 Red), Carry Bag, User Manual, Test Certificate
SKU: n/a -
Calibrator, Metravi
CE-0102TMC Non-Contact Tachometer Calibrator
- Easy to use calibrator for instant and reliable calibration of Non -Contact tachometers up to 199999 RPM
- The desired RPM can easily be set using the front panel switches
- Since RPM is a function of the frequency,the bright White LED flashes at avalue nearest to the set RPM and the actual RPM/Frequency is displayed on the 2 Line Backlit alpha numeric LCD display
- The actual RPM/Frequency is displayed on the 2 Line Backlit alpha numeric LCD display
SKU: n/a -
Breath Alcohol Analyser, Metravi
CEM DT-800A Breath Alcohol Analyser
- Measuring Range: 0 to 2.500 mg/L
- 0 to 0.500% BAC
- 0 to 500 mg/100ml
- Accuracy: ±0.020mg/L <0.400mg/L
- ±5% 0.400 to 1.000mg/L
- ±20% > 1.000mg/L
- Resolution: 0.001% BAC
- Sensor: Professional fuel cell sensor
- Response Time: ≤5s
- Alarms: Two acousto-optic alarms for drink and drunkenness
- Blowing interrruption indication
SKU: n/a -
EARTH/GROUND RESISTANCE TESTER, CLAMP-ON GROUND RESISTANCE TESTER, Metravi
CET-01 Clamp On Ground Resistance Tester
EARTH/GROUND RESISTANCE TESTER, CLAMP-ON GROUND RESISTANCE TESTER, MetraviCET-01 Clamp On Ground Resistance Tester
- Display: 4 digit Backlit LCD
- Resistance Range: 0.01Ω to 1500Ω
- Resolution: 0.01 Ohms
- Auto Ranging
- Storage of Measured Data: 99 Data
- Setting of Resistance Alarm Critical Value: 1 – 199 Ohms
- Data Hold, Auto Power Off
- Instrument safety: IEC/EN61010-1, IEC/EN6010-2-032
- Auto Power Off: after 5 minutes of being idle
- Display: 4 digits 9999 counts Backlit LCD with annunciators
- Memory size: 99 Units of Reading
- Data upload interface: RS232 (Optional)
SKU: n/a -
Cable Fault Locator, Metravi
CFL-01 Cable Fault Locator with Pipe and Cable Tracer
- Consists of a transmitter and a receiver
- Used to detect or trace conductors and to find short faults in them.
- Conductor tracing in the soil
- Detecting fuses and assigning current circuits
- Tracing sockets and distribution sockets having accidentally been covered by plastering
- Detecting interruptions and short-circuits in floor heating
- Tracing metallic water and heating piping
- Automatic and manual sensitivity adjustment
- Acoustic reception signal may be switched off
- Auto-Power-Off function
- Backlit LCD
SKU: n/a -
Cable Fault Locator, Metravi
CFL-02 Digital Cable Fault Locator
- Pin Points Fault in all underground cables.
- Useful for Power, Control & Telecom Cables
- Maximum Cable Length 5kms
- Accuracy ±5%
- Faults located can be Medium/High Resistance Faults, Open Circuit and Short Circuit faults
- Two Techniques used
- Potential Comparison Technique
- Capacitance Comparison Technique
SKU: n/a -
HANDHELD DEVICES, MULTIMETERS, Sonel
CMM-40 Multimeters
- MAX and MIN function for saving extreme values
- AC+DC function for reading the sum of an alternating and direct component
- REL mode for relative measurement to a stored reference value
- PEAK Hold for displaying the peak value of the measured parameter.
SKU: n/a -
HANDHELD DEVICES, MULTIMETERS, Sonel
CMM-60 Multimeters
- The automatic holding of the measurement result while working with both hands is now possible thanks to the AutoHold function,
- Measurements of the current loop 4-20 mA in analogue circuits controlling temperature, pressure, humidity or flow sensors are possible thanks to the special function that displays the percentage results for the corresponding current values,
- The meter allows the measurement of very small currents in the range of 500 μA, useful during service works, e.g. in tests of real-time clock support systems or in the maintenance of flame sensors in combustion chambers,
- Thanks to the dedicated “CMM-60 Multimeter Software”, it is possible to transfer results from the meter’s memory to a computer program and analyse these results further,
- Visibility in all conditions and reading at a wide angle are possible thanks to the colour display with a resolution of 320 x 240 pixels and a diagonal of 3.5”,
- Operating the meter in thick gloves during industrial measurements will not be a problem thanks to the specially designed rotary switch
SKU: n/a -
GAS DETECTORS & ANALYSERS, CARBON MONOXIDE DETECTOR, Metravi
CO-09 Carbon Monoxide Meter
- Max Hold and Data Hold
- Backlit LCD Display
- Range : 0 – 1000PPM
- Resolution : 1PPM
- Accuracy : ±5% or ±10PPM
- Auto/Manual Zero
- Warm up period: 10 seconds
- Sensor Type : Stabilised electrochemical Gas-specific (CO)
- Auto Power Off
- High accuracy, quick response
- Pocket-sized
SKU: n/a
