-26%
Calibrator, Metravi
CAL-408 Bench-type RTD Calibrator
Availability:
6 in stock
- Portable type
- 14 Fixed range Selectable Outputs
- Outputs available at : -200, -100, -50, -25, 0, 25, 50, 100, 150, 200, 300, 400, 500, 600°C
- Accuracy : ±0.05% Ohm of FSR
- Compensation : Long Wire Compensation of 100m. sensor cable
8,063.00 ₹ 10,885.00 ₹
6 in stock
CompareRelated products
-
Calibrator, Metravi
11+ Universal Source Calibrator
- Provides 25% step or 100% step DC Current output current manually or Automatically.
- TC Source terminals and built in lead connector of same temperature, The unit can be converted between °C & °F
- Auto Power Off
- Display : 6 Digits white backlight LED on the LCD
- Technical Specifications
- DC voltage : 0 – 100mV/1V/10V
- Resolution : 1µV/10µV/0.1mV
- Accuracy : ±0.02%
- DC Current : 0 – 20mA
- Resolution : 1µA
- Accuracy : ±0.02%
SKU: n/a -
Clamp Meter, Metravi
DT-369 TRMS AC Clamp Meter
- Display: 6000 Counts LCD
- T-RMS
- Auto Power Off
- Flame Sensor Current measurement
- Relative Measurement
- Clamp Jaw Dia: 30mm
- Display : LCD display.
- MAX. Display : 5999 digits (3 5/6) auto polarity display.
- Measuring method : ADC+MCU.
- Sampling rate : 3times/second.
- Overload display : “OL” displayed
SKU: n/a -
Calibrator, Metravi
CAL-400-3 mV mA Calibrator
- Consists of a transmitter and a receiver
- Used to detect or trace conductors and to find short faults in them.
- Conductor tracing in the soil
- Detecting fuses and assigning current circuits
- Tracing sockets and distribution sockets having accidentally been covered by plastering
- Detecting interruptions and short-circuits in floor heating
- Tracing metallic water and heating piping
- Automatic and manual sensitivity adjustment
- Acoustic reception signal may be switched off
- Auto-Power-Off function
- Backlit LCD
SKU: n/a -
Calibrator, Metravi
CAL-600 Universal Calibrator
- Hand Held, Battery Operated
- Extra Large LCD Display
- Displays both output and measurements
- In the output / measurement mode following are available:
- DC Voltage: 0 – 24mV / 100mV / 15V
- Accuracy: ±0.2%
- DC Current: 0 – 24mA
- Accuracy: ±0.2%
- Step wise output of 4/8/12/16/20/24mA
- Passive Current output: 0 – 24mA
- Accuracy: ±0.2%
- 24V Loop Power Output
- Resistance Source: 15Ω ~ 400Ω
- Resistance Measurement: 0Ω ~ 400Ω
- Accuracy: ±0.2%
SKU: n/a
