-26%
Metravi, MULTIMETER, CLAMP-ON CURRENT ADAPTOR FOR MULTIMETER
CA-01 AC Clamp-on Current Adapter for Digital Multimeter
Availability:
6 in stock
- Can be used with any Digital Multimeter with 200mV / 400mV / 600mV AC range
- Can measure AC Current up to 200A (cannot measure DC current)
- Provides output of 1mV/A
- Sensitivity: 1A/mV AC
- Accuracy: ±2%
- Clamp Jaw Size:16mm Dia.
1,350.00 ₹ 1,823.00 ₹
6 in stock
CompareRelated products
-
Battery Impedance Tester, Solar Tools, Metravi
TM-6002 Battery Impedance Tester
- Large Backlit LCD Display
- Data Logging up to 9999 sets
- Resistance Measurement: 10uΩ to 40Ω
- Voltage Measurement: 1mV to 40V
- Temperature Measurement: -20° to 60°C
- DC Current Measurement: 0.6A to 700A DC
- Measures internal impedance and open circuit voltage of the secondary batteries, including Nickel-metal Hydride (NiMH), Nickel-cadmium (NiCd), Lithium-ion (Li-ion), Alkaline and Lead-acid batteries.
- AC four-terminal method to measure the internal impedance by eliminating lead impedance and contact impedance to get accurate results.
SKU: n/a -
Calibrator, Metravi
CAL-ER Earth and Ground Tester Calibrator
- Connection: 4-wire method
- Insulation Resistance: 10MΩ above(between the circuit and shell 500V)
- Safety Standards: IEC61010-1，CAT Ⅲ 600V，Polluted Gradation
- Package includes: Meter, Test Leads (2 Black, 2 Red), Carry Bag, User Manual, Test Certificate
SKU: n/a -
Cable Fault Locator, Metravi
CFL-02 Digital Cable Fault Locator
- Pin Points Fault in all underground cables.
- Useful for Power, Control & Telecom Cables
- Maximum Cable Length 5kms
- Accuracy ±5%
- Faults located can be Medium/High Resistance Faults, Open Circuit and Short Circuit faults
- Two Techniques used
- Potential Comparison Technique
- Capacitance Comparison Technique
SKU: n/a -
Calibrator, Metravi
M-01S mV Thermocouple and RTD Source Calibrator
- DC Voltage: -10.000mV~110.00mV-0.1000V~1.1000V
- Accuracy: 0.05%+0.03mV / 0.05%+0.3mV
- Resolution: 0.01mV / 0.0001V
- Resistance: 0~400.0Ω / 0~4.000KΩ
- Accuracy: 0.05%+0.2Ω / 0.05%+2Ω
- Resolution: 0.1Ω / 1Ω
- Electrical safety : EN61010-1:2001, CE, TUV ISO-9001 Electromagnetic compatibility (EMC) : EN61326-1:2006
- Protection : IP40, 1m drop-tested
- Vibration and fall : IEC 60068-2-64:2008, IEC 60068-2-32:2008
- Display : 5 digits, segment code LCD with white backlight
- Power Supply : 3 x AA alkaline batteries
- Accessories : 1 pair Industrial test leads, User Manual, 3 units AA alkaline Battery, Thermocouple Adapter
SKU: n/a
