Metravi
Showing 25–48 of 103 results
-
Calibrator, Metravi
CE-0102TMC Non-Contact Tachometer Calibrator
- Easy to use calibrator for instant and reliable calibration of Non -Contact tachometers up to 199999 RPM
- The desired RPM can easily be set using the front panel switches
- Since RPM is a function of the frequency,the bright White LED flashes at avalue nearest to the set RPM and the actual RPM/Frequency is displayed on the 2 Line Backlit alpha numeric LCD display
- The actual RPM/Frequency is displayed on the 2 Line Backlit alpha numeric LCD display
SKU: n/a -
Breath Alcohol Analyser, Metravi
CEM DT-800A Breath Alcohol Analyser
- Measuring Range: 0 to 2.500 mg/L
- 0 to 0.500% BAC
- 0 to 500 mg/100ml
- Accuracy: ±0.020mg/L <0.400mg/L
- ±5% 0.400 to 1.000mg/L
- ±20% > 1.000mg/L
- Resolution: 0.001% BAC
- Sensor: Professional fuel cell sensor
- Response Time: ≤5s
- Alarms: Two acousto-optic alarms for drink and drunkenness
- Blowing interrruption indication
SKU: n/a -
EARTH/GROUND RESISTANCE TESTER, CLAMP-ON GROUND RESISTANCE TESTER, Metravi
CET-01 Clamp On Ground Resistance Tester
EARTH/GROUND RESISTANCE TESTER, CLAMP-ON GROUND RESISTANCE TESTER, MetraviCET-01 Clamp On Ground Resistance Tester
- Display: 4 digit Backlit LCD
- Resistance Range: 0.01Ω to 1500Ω
- Resolution: 0.01 Ohms
- Auto Ranging
- Storage of Measured Data: 99 Data
- Setting of Resistance Alarm Critical Value: 1 – 199 Ohms
- Data Hold, Auto Power Off
- Instrument safety: IEC/EN61010-1, IEC/EN6010-2-032
- Auto Power Off: after 5 minutes of being idle
- Display: 4 digits 9999 counts Backlit LCD with annunciators
- Memory size: 99 Units of Reading
- Data upload interface: RS232 (Optional)
SKU: n/a -
Cable Fault Locator, Metravi
CFL-01 Cable Fault Locator with Pipe and Cable Tracer
- Consists of a transmitter and a receiver
- Used to detect or trace conductors and to find short faults in them.
- Conductor tracing in the soil
- Detecting fuses and assigning current circuits
- Tracing sockets and distribution sockets having accidentally been covered by plastering
- Detecting interruptions and short-circuits in floor heating
- Tracing metallic water and heating piping
- Automatic and manual sensitivity adjustment
- Acoustic reception signal may be switched off
- Auto-Power-Off function
- Backlit LCD
SKU: n/a -
Cable Fault Locator, Metravi
CFL-02 Digital Cable Fault Locator
- Pin Points Fault in all underground cables.
- Useful for Power, Control & Telecom Cables
- Maximum Cable Length 5kms
- Accuracy ±5%
- Faults located can be Medium/High Resistance Faults, Open Circuit and Short Circuit faults
- Two Techniques used
- Potential Comparison Technique
- Capacitance Comparison Technique
SKU: n/a -
GAS DETECTORS & ANALYSERS, CARBON MONOXIDE DETECTOR, Metravi
CO-09 Carbon Monoxide Meter
- Max Hold and Data Hold
- Backlit LCD Display
- Range : 0 – 1000PPM
- Resolution : 1PPM
- Accuracy : ±5% or ±10PPM
- Auto/Manual Zero
- Warm up period: 10 seconds
- Sensor Type : Stabilised electrochemical Gas-specific (CO)
- Auto Power Off
- High accuracy, quick response
- Pocket-sized
SKU: n/a -
CAPACITANCE METER, Metravi
DCM-1502 Capacitance Meter
- Easy to read LCD Display 3-1/2 Digits 1999 Counts
- High measuring Accuracy
- Measurements possible even under strong magnetic field
- LSI Circuit Provides high reliability and durability
- Light Weight and compact construction
- Range: 0 – 200p / 2n / 20n / 200n / 2u / 20u / 200u / 2000u / 20000uF
- Accuracy: ± 0.5%
SKU: n/a -
FUNCTION GENERATOR, DIGITAL FUNCTION GENERATOR, Metravi
DDS-30 30Mhz DDS Function Generator
- Frequency output: 30MHz
- Full-band resolution: 1μHz
- Uses direct digital synthesis (DDS) method
- Sampling Rate: 200MSa/s
- Vertical Resolution: 14 bits
- Waveform: Sine Wave, Square Wave, Ramp Wave, Pulse Wave, Noise, DC, Arbitrary Wave
- Working Modes: Output gating, continuous, modulation, frequency sweep
- Modulation Types: AM, FM, PM, FSK, Line, Log
- Low-jitter Square Wave Output
- TTL level signal compatible 7 digits high accuracy frequency counter
SKU: n/a -
IC TESTER, DIGITAL IC TESTER, Metravi
DICT-2040 Digital IC Tester
- Self Diagnosis
- Identifies Unknown model number of Devices
- Measures more than 2000 kinds of devices
- Tests 54 / 74 series TTL
- Tests 4000 and 4500 series CMOS
- 40 Pin capability
- Control: 16 key tact switch keypad with dual tone sound indication
- Display: 6 Digit LED Display
- Test Socket: 40 pin ZIF Socket
SKU: n/a -
INSULATION TESTER, DIGITAL INSULATION TESTER, Metravi
DIT-99A Digital Insulation Tester
- Battery Cum Mains Operated
- Data Hold Function
- Fault Protection, Buzzer Alarms if short circuit
- Display: 3-1/2 Digits 1999 Counts LCD
- Low Battery Indication
- Test Voltage 100V
- Insulation Resistance Range 200M.Ohms
- Accuracy: ±4%
SKU: n/a -
Data Logger, Metravi
DL-SL-01 Sound Level Data Logger
- This unit confirms to the IEC61672-1 CLASS2 for Sound Level Meter.
- NORM (Normal) & PEAK mode
- Data manage: STORE, REAL TIME
- Over range indication
- A & C Weighting
- FAST & SLOW response
- Software Calibration
- Manual & Automatic Start Modes
- Measurement Range: 30dB to 130dB
- Sampling Rate: Settable from 1 Sec. to 24 Hours.
- With USB PC Interface Cable and Software
SKU: n/a -
Data Logger, Metravi
DL-TH-01 Temperature and Humidity Data Logger
- Designed with high accuracy sensor for temperature & humidity
- Fast Response and Highly Stable
- Used for Monitoring and collecting data of environmental temperature and humidity
- Memory for 32700 values；
- LCD to show some logging information easily;
- Freely selectable measurement cycle from 1 sec. to 24h;
- Download collected data through PC’s USB;
- Alarm display if user-defined maximum/minimum values are exceeded;
- Analysis software used to view graph for logging data
SKU: n/a -
Data Logger, Metravi
DL-VL-01 Voltage and Current Data Logger
- Single Channel Input
- Measures and records virtual value of Voltage and Current of AC Signal
- Stores 100,096 Data
- AC Voltage Range: 10V ~ 600V (40Hz ~ 1kHz)
- Accuracy: ± 2%
- AC Current Range: 10A ~ 200A (50 / 60Hz)
- Accuracy: ± 2%
- Wave Record Function: Records the wave which exceeds the set Voltage / Current.
- Real Time Display, Calibrated with software
- Max / Min Reading Hold
- Peak Hold FunctionUSB PC Interface with software
SKU: n/a -
DISTANCE METER, ULTRASONIC DISTANCE METER, Metravi
DM-09 Digital Ultrasonic Distance Meter
- Measures in imperial / metric units
- Start Point Selection
- Data Store / Recall
- Computes Areas and Volumes
- 5 Groups of values in memory
- Sum of lengths
- Auto / Manual shut off
- Backlit LCD
- Audio warning for wrong readings
- Measuring Range 0.5 – 16m (1.64 – 52.48ft)
- Accuracy: ±1.0%
SKU: n/a -
Metravi, OSCILLOSCOPE, DIGITAL STORAGE OSCILLOSCOPE DUAL CHANNEL
DSO-5050E Dual Channel Digital Storage Oscilloscope
Metravi, OSCILLOSCOPE, DIGITAL STORAGE OSCILLOSCOPE DUAL CHANNELDSO-5050E Dual Channel Digital Storage Oscilloscope
- Double Analog Channels High-resolution colorful LCD display with resolution of 400 X 240 (or 800 X 480)
- To support plug and play USB storage instrument to communicate with computer.
- Automatic waveform and status setup. Waveform, setup, bitmap storage, waveform and setup reoccurrence.
- Elaborate view window extension function for delicate analysis of waveform details and profile
- Automatic measurement of 28 kinds of waveform parameters
- Automatic cursor tracing and measurement function
- Unique waveform recording and playback functions
- Embedded FFT
- Multiple mathematical calculation functions (including +, -, X, ÷ ) for waveform
- Edge, video, pulse width and ALT Trigger functions
- Multi-language menu display
SKU: n/a -
Metravi, OSCILLOSCOPE, DIGITAL STORAGE OSCILLOSCOPE DUAL CHANNEL
DSO-5100E Dual Channel Digital Storage Oscilloscope
Metravi, OSCILLOSCOPE, DIGITAL STORAGE OSCILLOSCOPE DUAL CHANNELDSO-5100E Dual Channel Digital Storage Oscilloscope
- Edge, video, pulse width and ALT Trigger functions
- Multi-language menu display
- Bandwidth 100MHz
- Sampling Rate: 1GSA/Sec.
- Storage Depth: 25k
- Record Length: Sampling Point of 2 x 521k
- Vertical Deflection: 1mV/div~5V/div
- Double Analog Channels High-resolution colorful LCD display with resolution of 400 X 240 (or 800 X 480)
- To support plug and play USB storage instrument to communicate with computer.
SKU: n/a -
Metravi, OSCILLOSCOPE, DIGITAL STORAGE OSCILLOSCOPE DUAL CHANNEL
DSO-5150E Dual Channel Digital Storage Oscilloscope
Metravi, OSCILLOSCOPE, DIGITAL STORAGE OSCILLOSCOPE DUAL CHANNELDSO-5150E Dual Channel Digital Storage Oscilloscope
- Unique waveform recording and playback functions
- Embedded FFT
- Multiple mathematical calculation functions (including +, -, X, ÷ ) for waveform
- Edge, video, pulse width and ALT Trigger functions
- Multi-language menu display
- Bandwidth 150MHz
- Sampling Rate: 1GSA/Sec.
- Storage Depth: 25k
- Record Length: Sampling Point of 2 x 521k
- Vertical Deflection: 2mV/div~5V/div
SKU: n/a -
Metravi, OSCILLOSCOPE, DIGITAL STORAGE OSCILLOSCOPE DUAL CHANNEL
DSO-6050 Digital Storage Oscilloscope
Metravi, OSCILLOSCOPE, DIGITAL STORAGE OSCILLOSCOPE DUAL CHANNELDSO-6050 Digital Storage Oscilloscope
- Bandwidth: 50MHz
- Channel: Dual (2)
- Sample Rate: 1G/s
- Sample Rate/Relay Time Accuracy: ±100ppm
- Display: 7″ colour LCD, 800 x 480 pixels
- Probe Attenuation Factor: 1X, 10X, 100X, 1000X
- DC Accuracy: Average≥16：±(3% reading + 0.05 div) for △V
- DC Gain Accuracy: ±3%
- Max Input Voltage: 400V (PK – PK) (DC+AC, PK – PK)
- Channel Isolation: 50Hz : 100 : 1, 10MHz : 40 : 1
- Input Impedance: 1MΩ ± 2%, in parallel with 20pF±5pF
- Communication Interface: USB host, USB device
- Frequency Counter
SKU: n/a -
Clamp Meter, Metravi
DT-115 Digital TRMS AC Clamp Meter
- Accuracy: ± (2%+30)
- Resistance: 0-600/6K/60K/600K/6M/40M Ohms
- Accuracy: ± (0.8%+3)
- Capacitance: 60nF/600nF/6uF/60uF/600uF/6mF/30mF
- Accuracy: ± (3.5%+20)
- Frequency: 0-10/100/1K/10K/100K/1M/10MHz
- Accuracy: ± (0.1%+3)
- Temperature: -20°C to 1000°C
- Accuracy: ± (1.0%+5)
- Diode & Continuity test
SKU: n/a -
Clamp Meter, Metravi
DT-1150 Digital AC Clamp Meter
- Diode and Continuity test
- Jaw Opening : Approx. 40mm
- Overload Protection
- CE CAT III 600V
- Dimension : 250(L) × 97(W) × 48(H) mm
- Weight : 345gm approx.(including battery)
- Power Supply : 3V (2pcs AAA Batteries)
- Working Environment : 0~40°C, 45% ~ 75% RH Non Condensing (When temperature is less than 10°C)
- Storage Environment : -10°C~50°C, RH is less than 80%
- Accessories : User Manual, Test Leads, 2pcs battery, Soft carry case
SKU: n/a -
Clamp Meter, Metravi
DT-1350 Digital AC/DC Clamp Meter
- Display : 3 ½ Digit 2000 count Backlit LCD, with auto polarity conversion
- Over Range Indication : OL will be shown on the LCD
- Hold : Data hold on
- Low Battery Indication
- Weight : 345gm approx.(including battery)
- Power Supply : 3V (2pcs AAA Batteries)
- Working Environment : 0~40°C, 45% ~ 75% RH Non Condensing (When temperature is less than 10°C)
- Storage Environment : -10°C~50°C, RH is less than 80%
- Accessories : User Manual, Test Leads, 2pcs battery, Soft carry case
SKU: n/a -
-
Clamp Meter, Metravi
DT-3250 Digital AC/DC Clamp Meter
- Auto-ranging AC/DC Clamp meter
- Auto Power Off
- Peak Hold and Data Hold facility
- Display: 3-3/4 Digits 3999 Counts Backlit LCD with analogue bargraph
- Frequency Measurement while measuring current
- Relative Measurement facility
- Diode Test and Continuity Test
SKU: n/a -
Clamp Meter, Metravi
DT-369 TRMS AC Clamp Meter
- Display: 6000 Counts LCD
- T-RMS
- Auto Power Off
- Flame Sensor Current measurement
- Relative Measurement
- Clamp Jaw Dia: 30mm
- Display : LCD display.
- MAX. Display : 5999 digits (3 5/6) auto polarity display.
- Measuring method : ADC+MCU.
- Sampling rate : 3times/second.
- Overload display : “OL” displayed
SKU: n/a
