-26%
Data Logger, Metravi
DL-VL-01 Voltage and Current Data Logger
Availability:
6 in stock
- Single Channel Input
- Measures and records virtual value of Voltage and Current of AC Signal
- Stores 100,096 Data
- AC Voltage Range: 10V ~ 600V (40Hz ~ 1kHz)
- Accuracy: ± 2%
- AC Current Range: 10A ~ 200A (50 / 60Hz)
- Accuracy: ± 2%
- Wave Record Function: Records the wave which exceeds the set Voltage / Current.
- Real Time Display, Calibrated with software
- Max / Min Reading Hold
- Peak Hold FunctionUSB PC Interface with software
16,200.00 ₹ 21,870.00 ₹
6 in stock
CompareRelated products
-
Clamp Meter, Metravi
DT-369 TRMS AC Clamp Meter
- Display: 6000 Counts LCD
- T-RMS
- Auto Power Off
- Flame Sensor Current measurement
- Relative Measurement
- Clamp Jaw Dia: 30mm
- Display : LCD display.
- MAX. Display : 5999 digits (3 5/6) auto polarity display.
- Measuring method : ADC+MCU.
- Sampling rate : 3times/second.
- Overload display : “OL” displayed
SKU: n/a -
Cable Fault Locator, Metravi
CFL-01 Cable Fault Locator with Pipe and Cable Tracer
- Consists of a transmitter and a receiver
- Used to detect or trace conductors and to find short faults in them.
- Conductor tracing in the soil
- Detecting fuses and assigning current circuits
- Tracing sockets and distribution sockets having accidentally been covered by plastering
- Detecting interruptions and short-circuits in floor heating
- Tracing metallic water and heating piping
- Automatic and manual sensitivity adjustment
- Acoustic reception signal may be switched off
- Auto-Power-Off function
- Backlit LCD
SKU: n/a -
Acidity Testing Kit, Metravi
ATK Acidity Testing Kit
- Used to measure Acidity content of Transformer Oil
- Portable equipment with test tubes to conduct the tests
- A set of chemical reactions need to be conducted to evaluate acidity of transformer oil
- Test Set consists of Ethyl Alcohol, Sodium Carbonate Solution, Universal Indicator, Test Tubes, Graduated Dropper
- Color chart calibrated with neutralization number values and instruction manual is also provided.
SKU: n/a -
Battery Impedance Tester, Solar Tools, Metravi
TM-6002 Battery Impedance Tester
- Large Backlit LCD Display
- Data Logging up to 9999 sets
- Resistance Measurement: 10uΩ to 40Ω
- Voltage Measurement: 1mV to 40V
- Temperature Measurement: -20° to 60°C
- DC Current Measurement: 0.6A to 700A DC
- Measures internal impedance and open circuit voltage of the secondary batteries, including Nickel-metal Hydride (NiMH), Nickel-cadmium (NiCd), Lithium-ion (Li-ion), Alkaline and Lead-acid batteries.
- AC four-terminal method to measure the internal impedance by eliminating lead impedance and contact impedance to get accurate results.
SKU: n/a
