-26%
Data Logger, Metravi
DL-TH-01 Temperature and Humidity Data Logger
Availability:
6 in stock
- Designed with high accuracy sensor for temperature & humidity
- Fast Response and Highly Stable
- Used for Monitoring and collecting data of environmental temperature and humidity
- Memory for 32700 values；
- LCD to show some logging information easily;
- Freely selectable measurement cycle from 1 sec. to 24h;
- Download collected data through PC’s USB;
- Alarm display if user-defined maximum/minimum values are exceeded;
- Analysis software used to view graph for logging data
5,053.00 ₹ 6,821.00 ₹
6 in stock
CompareRelated products
-
Clamp Meter, Metravi
DT-1150 Digital AC Clamp Meter
- Diode and Continuity test
- Jaw Opening : Approx. 40mm
- Overload Protection
- CE CAT III 600V
- Dimension : 250(L) × 97(W) × 48(H) mm
- Weight : 345gm approx.(including battery)
- Power Supply : 3V (2pcs AAA Batteries)
- Working Environment : 0~40°C, 45% ~ 75% RH Non Condensing (When temperature is less than 10°C)
- Storage Environment : -10°C~50°C, RH is less than 80%
- Accessories : User Manual, Test Leads, 2pcs battery, Soft carry case
SKU: n/a -
Cable Fault Locator, Metravi
CFL-01 Cable Fault Locator with Pipe and Cable Tracer
- Consists of a transmitter and a receiver
- Used to detect or trace conductors and to find short faults in them.
- Conductor tracing in the soil
- Detecting fuses and assigning current circuits
- Tracing sockets and distribution sockets having accidentally been covered by plastering
- Detecting interruptions and short-circuits in floor heating
- Tracing metallic water and heating piping
- Automatic and manual sensitivity adjustment
- Acoustic reception signal may be switched off
- Auto-Power-Off function
- Backlit LCD
SKU: n/a -
Clamp Meter, Metravi
DT-115 Digital TRMS AC Clamp Meter
- Accuracy: ± (2%+30)
- Resistance: 0-600/6K/60K/600K/6M/40M Ohms
- Accuracy: ± (0.8%+3)
- Capacitance: 60nF/600nF/6uF/60uF/600uF/6mF/30mF
- Accuracy: ± (3.5%+20)
- Frequency: 0-10/100/1K/10K/100K/1M/10MHz
- Accuracy: ± (0.1%+3)
- Temperature: -20°C to 1000°C
- Accuracy: ± (1.0%+5)
- Diode & Continuity test
SKU: n/a -
Calibrator, Metravi
709H mV mA Loop Calibrator with HART Communication
- Compact Loop Calibrator with HART communication
- Able to read basic device information and execute diagnostic tests
- High precision ±0.01%
- High resolution 0.001mA
- Automatic Ramp & Step
- High visibility 3.2″ TFT colour display with backlight
- Supports SCPI
- Auto Power Off and Low Battery display
- Max. permitted voltage: 30V (between any two terminals or between any terminal and earth ground)
- Operating temperature : 0°C ~ 50°C
- Operating relative humidity: ≤ 80%RH
- Protection level: IP65 (Dust, Water spray)
SKU: n/a
