-26%
DISTANCE METER, ULTRASONIC DISTANCE METER, Metravi
DM-09 Digital Ultrasonic Distance Meter
Availability:
6 in stock
- Measures in imperial / metric units
- Start Point Selection
- Data Store / Recall
- Computes Areas and Volumes
- 5 Groups of values in memory
- Sum of lengths
- Auto / Manual shut off
- Backlit LCD
- Audio warning for wrong readings
- Measuring Range 0.5 – 16m (1.64 – 52.48ft)
- Accuracy: ±1.0%
1,881.00 ₹ 2,540.00 ₹
6 in stock
CompareRelated products
-
Cable Fault Locator, Metravi
CFL-01 Cable Fault Locator with Pipe and Cable Tracer
- Consists of a transmitter and a receiver
- Used to detect or trace conductors and to find short faults in them.
- Conductor tracing in the soil
- Detecting fuses and assigning current circuits
- Tracing sockets and distribution sockets having accidentally been covered by plastering
- Detecting interruptions and short-circuits in floor heating
- Tracing metallic water and heating piping
- Automatic and manual sensitivity adjustment
- Acoustic reception signal may be switched off
- Auto-Power-Off function
- Backlit LCD
SKU: n/a -
Calibrator, Metravi
M-05S mV mA Loop Calibrator
- Power Supply: Internal 24V circuit power supply
- Maintenance setup functions
- Auto power-off
- Backlight
- LED Flashlight
- Segment code is displayed on the LCD with a white backlight.
- Power: 3 AA battery cells
- Low-battery detection
- Small, firm, reliable, suitable for field use
- Electrical safety: EN61010-1:2001
- Withstand voltage: AC3540V(50/60Hz)/5 seconds between terminal and housing.
- Insulation impedance: DC1000V/100MΩ or more between terminal and housing.
SKU: n/a -
Calibrator, Metravi
CAL-600 Universal Calibrator
- Hand Held, Battery Operated
- Extra Large LCD Display
- Displays both output and measurements
- In the output / measurement mode following are available:
- DC Voltage: 0 – 24mV / 100mV / 15V
- Accuracy: ±0.2%
- DC Current: 0 – 24mA
- Accuracy: ±0.2%
- Step wise output of 4/8/12/16/20/24mA
- Passive Current output: 0 – 24mA
- Accuracy: ±0.2%
- 24V Loop Power Output
- Resistance Source: 15Ω ~ 400Ω
- Resistance Measurement: 0Ω ~ 400Ω
- Accuracy: ±0.2%
SKU: n/a -
Calibrator, Metravi
CAL-500 Universal Calibrator
- Hand Held, Battery Operated
- Extra Large LCD Display
- Displays both output and measurements
- In the output / measurement mode following are available:
- DC Voltage: 0 – 24mV / 100mV / 15V
- Accuracy: ±0.2%
- DC Current: 0 – 24mA
- Accuracy: ±0.2%
- Step wise output of 4/8/12/16/20/24mA
- Passive Current output: 0 – 24mA
- Accuracy: ±0.2%
- 24V Loop Power Output
SKU: n/a
