Shop
Showing 169–192 of 267 results
-
Insulation resistance meters, Sonel
MIC-10 Insulation Resistance Meters
- Measurement of insulation resistance up to 100 GΩ thanks to max 1000 V measurement voltage
- Designed for harsh environmental conditions conditions – IP67 ingress protection
- Excellent for repeatable measurements – memory of 12,000 records and UNI-Schuko adapter for sockets
- Allows for testing electrical continuity – RCONT 200 mA function
- Checking start capacitors in motors thanks to capacity measurement function
SKU: n/a -
Insulation resistance meters, Sonel
MIC-10K1 Insulation Resistance Meters
- Continuous indication of measured insulation resistance or leakage current
- Automatic discharge of measured object capacitance-voltage after the end of insulation resistance measurement
- Acoustic signaling of 5-second intervals to facilitate capturing time characteristics
- Adjustable measuring time – up to 99’59’’
- T1, T2, and T3 test times for measuring one or two absorption coefficients from the range of 1…600 s
- Polarization index (PI), absorption coefficients Ab1, Ab2 and dielectric absorption ratio (DAR) measurement
- Indication of actual test voltage during measurement
- 1.2 mA, 3 mA, or 6 mA test current
- Insulation resistance measurement using two- or three-wire method
- Measurements with test leads up to 20 m
- Protection against measuring live objects
SKU: n/a -
Insulation resistance meters, Sonel
MIC-2501 Insulation Resistance Meters
- Measurement voltage within the range of 100…2500 V, selected in steps of 100 V
- Continuous reading of measured insulation resistance or leakage current
- Automatic discharge of the measured object’s capacitance upon completion of insulation resistance measurement,
- Sound signalling of five-second time intervals, facilitating capture of time characteristics
- Timed measurement times T1 , T2 and T3 for measurement of absorption coefficients (Ab/PI/DAR) at 15, 60 and 600 s and polarization index
- Reading of actual measurement voltage during measurement
- Protection against measurement of live objects
SKU: n/a -
Insulation resistance meters, Sonel
MIC-30 Insulation Resistance Meters
- Measurement of insulation resistance up to 100 GΩ thanks to max 1000 V measurement voltage
- Designed for harsh environmental conditions conditions – IP67 ingress protection
- Excellent for repeatable measurements – memory of 12,000 records and UNI-Schuko adapter for sockets
- Allows for testing electrical continuity – RCONT 200 mA function
- Checking start capacitors in motors thanks to capacity measurement function
SKU: n/a -
Insulation resistance meters, Sonel
MIC-5001 Insulation Resistance Meters
- Continuous reading of measured insulation resistance or leakage current
- Automatic discharge of the measured object’s capacitance upon completion of insulation resistance measurement
- Sound signalling of fi ve-second time intervals, facilitating capture of time characteristics
- Timing of measurement time T1, T2 and T3 for measurement of dielectric absorption ratio (DAR) and polarization index (PI)
- Reading of actual measurement voltage during measurement
- Protection against measurement of live objects
- Two- or three-lead method of insulation resistance measurement
- Power supplied by accumulator
- Instruments meet the requirements laid down by standard EN 61557
- The meter can be powered and charged from an external power adapter or from a car lighter socke
SKU: n/a -
Portable Instrument, Temperature measurement, Temperature Thermometers, TESTO, Testo Measuring Instruments
Mini surface thermometer – Mini surface thermometer
Portable Instrument, Temperature measurement, Temperature Thermometers, TESTO, Testo Measuring InstrumentsMini surface thermometer – Mini surface thermometer
- Perfect for checking surface temperatures
- Extra wide measuring tip for placing on a flat measuring point
- Measurement of high temperatures up to +300 °C
- Many areas of application: heating engineering, sanitation sector, and air conditioning/ventilation/refrigeration technology
SKU: n/a -
Metravi, MOISTURE METER, PINLESS MOISTURE METER
MM-10 Digital Pinless Moisture Meter
- Pinless Moisture meter is an electronic dampness indicator with a measuring process working on the principle of high frequency measurement.
- Used for non-destructive tracing dampess in building materials of all kinds as well as for detecting damp distribution in walls, ceiling and floors.
- Suitable for pre-testing the readiness of building materials for covering prior to CM Measurment
- Quickly indicates the moisture content of materials
- Depth of penetration about 20 – 40mm
- Low battery Indication, Auto Power Off
- Max / Min Record Function.
- Data Hold
- White Backlit LCD Display
- Measuring Range: 0 to 100%
SKU: n/a -
Metravi, MILLION MEGOHMS METER, ANALOGUE MILLION MEGOHMS METER
MMM-1 Analogue Million MegOhms Meter
- Ideal for measuring high resistance and insulation
- Output Test Voltage: 100V / 200V / 300V / 400V / 500V
- It has a measuring range of 1 MOhm to 10 Million M.Ohms
- Insulation Resistance Range available in 6 ranges.
- Accuracy: ±5%
- Overload Protection
- Visual warning for HT link
- Analogue Display
- Auxiliary Power Supply 220V AC
SKU: n/a -
Multifunction electrical installations meters, Sonel
MPI-530 Multifunction Electrical Installations Meter
Multifunction electrical installations meters, SonelMPI-530 Multifunction Electrical Installations Meter
- Short circuit loop impedance (also in circuits secured with RCDs)
- RCD parameters
- Insulation resistance
- Earth resistance (4 measurement methods + soil resistivity measurement)
- Continuity of protective and equipotential bondings
- Light intensity measurement
- Phase sequence test
- Motor rotation direction test.
SKU: n/a -
RCD Meter, Sonel
MRP-201
- Testing of general, short delay and selective RCDs for the rated current values 10, 15, 30, 100, 300, 500 mA
- Measurement of IA trip current and tripping time tA for currents 0.5 IΔn, 1 IΔn, 2 IΔn, 5 IΔn
- RE and UB measurement without RCD tripping
- Extended AUTO function of RCD measurement
- Measurement of IA and tA during one RCD tripping
- Checking the correctness of PE connection using a contact electrode
- Measurement of voltage (0 … 500 V) and network frequency
- Memory of 990 results
- Wireless data transmission to a computer
SKU: n/a -
Earth resistance and resistivity meters, Sonel
MRU-21 Earth Resistance And Resistivity Meters
- Measurement of resistance of auxiliary electrodes RS and RH
- Measurement of interference voltage
- Selection of maximum measuring voltage (25 V and 50 V)
- Auto-zero function for the resistance of measurement leads (RCONT zero)
SKU: n/a -
Earth resistance and resistivity meters, Sonel
MRU-30 Earth Resistance And Resistivity Meters
- Measurement of auxiliary electrode resistances RS and RH
- Measurement of interference voltage
- Measurement in the presence of interference voltages in networks with frequencies of 50 Hz and 60 Hz
- Selection of maximum measurement voltage (25 V and 50 V)
- In ground resistivity measurements, distances between electrodes can be input in meters (m) or feet (ft)
SKU: n/a -
ELECTRICAL SAFETY MEASUREMENTS, SHORT CIRCUIT LOOP MEASUREMENTS, Sonel
MZC-304F
- Fault loop impedance measurement with 0.01 Ω resolution.
- Low-current impedance measurement in circuits protected by RCD ≥ 30mA with 0.01 Ω resolution (range of 180…270 V)
- Operates in networks with voltages 220/380 V, 230 V/400 V, 240/415 V (operating range 180…460 V)
- Operating voltage range: 180…270 V (for ZL-PE and ZL-N) and 180…460 V (for ZL-L).
- Maximum measuring current: 7.6 A for 230 V (3×10 ms), 13.3 A for 400 V (3×10 ms).
- Operating frequency 45…65 Hz
- Calculation of Ik fault current.
- Measurement with swapped L and N conductors.
- Measurement of resistance (RS) and reactance (XS) components.
- Low-voltage measurement of continuity of circuit and resistance.
SKU: n/a -
Short Circuit Loop Measurements, Sonel
MZC-306
- Fault loop impedance measurement with 0.01Ω resolution
- Low-current impedance measurement in circuits protected by RCD ≥ 30mA with 0.01 Ω resolution (100…440 V)
- Operates in networks with voltages 110/190 V, 115/200 V, 127/220 V, 220/380 V, 230/400 V, 240/415 V, 290/500 V and 400/690 V (operating range 100…750 V)
- Operating frequency 45…65 Hz
- Calculation of fault current
- Automatic differentiation between phase and phase-to-phase voltage
- Possibility of applying 1.2, 5, 10, 20 m test leads or an adapter terminated by a power network plug
- Measurement with swapped L and N conductors
- Measurement of resistance (RS) and reactance (XS) components
SKU: n/a -
Short Circuit Loop Measurements, Sonel
MZC-330S
- Measurement of very low short circuit loop impedances (with resolution 0,1 mΩ) with a current of 130 A at 230 V; maximum 300 A at 690 V.
- Measurement with a current of 24 A at 230 V, maximum 37 A at 690 V with resolution 0,01 Ω.
- Measurements in installations with rated voltages: 110/190 V, 115/200 V, 127/220 V, 220/380 V, 230/400 V, 240/415 V, 290/500 V and 400/690 V and frequencies 45…65 Hz.
- Ability to perform measurements in short circuit system: phase-phase, phase-PE, phase-N.
- Differentiation between the phase voltage and the inter-phase voltage while calculating the short circuit current.
- Ability to change the length of test lead (measurement with 2p method).
- 4p (four-pole) method, test leads do not require calibration (measurement with current up to 300 A).
- Measurement of resistance (RS) and reactance (XS) components.
SKU: n/a -
Metravi, OSCILLOSCOPE, ANALOGUE OSCILLOSCOPE
OS-5010A Analogue Oscilloscope
- Single Channel Single Trace Oscilloscope
- Bandwidth: 10MHz
- Confirms to EN61010-1 (1993) and EN-IEC61326-1(1997)
- Wide measurement
- High sensitivity and trigger lock
- Sweep switch adopts digital code switch and accuracy
- Proper to use in colleges and for engineers and technicians
- Deflection factor is 5mV~5V/div in 1-2-5 Sequence in 10 steps
- Accuracy: ±5%
- Maximum Input Voltage: 400Vpk
- Sweep deflection factor is 0.1us/div-0.1s/div
SKU: n/a -
Metravi, POWER GUARD / ENERGY METER
PG-01 Power Guard and Energy Meter
- Multifunction Power Meter
- Works on 6A / 230V AC
- Displays Voltage, Current, Power, Power Factor, Frequency, KWh, CO2, Cost of running the equipment.
- Calculates total time consumed
- Calculates cost of electricity consumed
- Retains the readings while load shedding
- Voltage: 100V AC ~ 260V AC
- Current: upto 6A
- Power: 0.5 – 1380W
SKU: n/a -
DIFFERENTIAL PRESSURE MANOMETER, Metravi
PM-01 Differential Pressure Manometer
- Differential Pressure Manometer
- Backlit LCD Dual Display
- Low Battery Indication
- Under Range and Over Range Indication
- Fast Response Time
- Battery Operated
- Measuring Range: 0 – 5 PSI
- It measures in various units like inH2O, PSI, bar, mbar, kPa, inHg, mmHg, OZin2, ftH2O, cmH2O, kgcm2.
- With RS-232 PC Interface Facility
- High Accuracy of 0.3%
SKU: n/a -
CALIBRATOR, PROCESS METER, Metravi
PM-29 Process Meter
- Digital Process Calibrator cum Multimeter
- Display: Backlit LCD, 4 digit display for measurement, 5 digit display for output
- Confirms to IEC61010-1 (CATIV 600V, CATIII 1000V, Pollution Level II
- Overload Protection
- Surge Protection
- Developed, designed and produced according to ISO 9001
SKU: n/a -
Power Quality Analysis, Sonel
PQM-700 Power Quality Analysis
- 4 current inputs, physical measurement of current in the neutral conductor.
- Registration of up to 1100 parameters, including average, maximum, minimum and instantaneous values.
- Built-in heater, stable operation at low temperatures down to -20ºC.
- Internal rechargeable battery, autonomy of the meter (min. 6 hours).
- IP65 ingress protection, possibility of work in rain, snow and high humidity
SKU: n/a -
Power Quality Analysis, Sonel
PQM-707 Power Quality Analysis
- 7” touchscreen – ergonomic and intuitive graphical user interface.
- Over 10 years of recording.
- CAT IV 600 V measurement category – high safety.
- All parameters according to class S – high accuracy of measurements.
- Li-Ion rechargeable battery – higher mobility.
- Powering from measured network – reliability of measurements.
- Removable memory card – recording data with no restrictions.
- Quick setup and reporting – ease of use.
- Cooperation with desktop Sonel Analysis software – extended data analysis.
SKU: n/a -
Power Quality Analysis, Sonel
PQM-711 Power Quality Analysis
- Remote control and data transfer through a built-in GSM modem.
- Anti-theft feature – SMS notification in the event of position change (built-in GPS receiver).
- Real-time clock synchronized to GPS protocol.
- Remote control of the analyzer via software: Sonel Analysis (Wi-Fi and GSM for Windows) or Sonel Analysis Mobile (Wi-Fi for Android).
SKU: n/a -
CLAMP METER, DIGITAL TRMS AC/DC CLAMP METER, DIGITAL AC/DC CLAMP METER, Metravi
PRO 419 Digital TRMS AC/DC Clamp Meter
CLAMP METER, DIGITAL TRMS AC/DC CLAMP METER, DIGITAL AC/DC CLAMP METER, MetraviPRO 419 Digital TRMS AC/DC Clamp Meter
- Professional T-RMS AC/DC Clamp Meter
- 4000 Counts, 3-3/4 Digits Backlit LCD Display
- Confirms to CAT-IV 600V, CAT-III 1000V, CE, IEC-61010-1
- 600V AC/DC Protection in all ranges
- 34 mm Clamp Jaw Dia
- Auto Power Off
- Non Contact Voltage Detector
- Flash light in the Jaw to access dark Areas
- Double Injection Housing, providing double insulation
- Data Hold, MAX-MIN Record, Relative Measurement
SKU: n/a
