-26%
METAL DETECTOR, Metravi
MD-300 Metal Detector
Availability:
6 in stock
- Simple operation, compact design, easy to store, low failure rate.
- Sensitivity is very easy to detect the size of a pin (or even less), metal items.
- Has the Low battery indication
- Very Cost Effective and stylish product
- Audio as well as Vibration Alert
- Battery Operated
- Light Weight
- Detection Distance: Pin – 35mm, Handgun – 120mm, US25 Cents 50mm.
1,950.00 ₹ 2,633.00 ₹
6 in stock
CompareRelated products
-
Battery Impedance Tester, Solar Tools, Metravi
TM-6002 Battery Impedance Tester
- Large Backlit LCD Display
- Data Logging up to 9999 sets
- Resistance Measurement: 10uΩ to 40Ω
- Voltage Measurement: 1mV to 40V
- Temperature Measurement: -20° to 60°C
- DC Current Measurement: 0.6A to 700A DC
- Measures internal impedance and open circuit voltage of the secondary batteries, including Nickel-metal Hydride (NiMH), Nickel-cadmium (NiCd), Lithium-ion (Li-ion), Alkaline and Lead-acid batteries.
- AC four-terminal method to measure the internal impedance by eliminating lead impedance and contact impedance to get accurate results.
SKU: n/a -
Calibrator, Metravi
CAL-ER Earth and Ground Tester Calibrator
- Connection: 4-wire method
- Insulation Resistance: 10MΩ above(between the circuit and shell 500V)
- Safety Standards: IEC61010-1，CAT Ⅲ 600V，Polluted Gradation
- Package includes: Meter, Test Leads (2 Black, 2 Red), Carry Bag, User Manual, Test Certificate
SKU: n/a -
Calibrator, Metravi
VIB-CAL-01 Handheld Vibration Calibrator
- Frequency : 159.2Hz +0.5%
- Amplitude : Acceleration : 9.81 m/s2 RMS
- Velocity : 9.81mm/sec RMS
- Displacement : 9.81 micron RMS
- Accuracy : ± 5%
- Distortion : < 3%
- Maximum load : 120 grams
- Power : 9V Rechargeable Battery (Upto 1.5 hours operation)
- Charge time : 15 hours
- Sensor Mounting base : M5 tapped hole
- Operating Temperature : 0°C to 55°C
- Operating Humidity : 90% non–condensing
SKU: n/a -
Calibrator, Metravi
709H mV mA Loop Calibrator with HART Communication
- Compact Loop Calibrator with HART communication
- Able to read basic device information and execute diagnostic tests
- High precision ±0.01%
- High resolution 0.001mA
- Automatic Ramp & Step
- High visibility 3.2″ TFT colour display with backlight
- Supports SCPI
- Auto Power Off and Low Battery display
- Max. permitted voltage: 30V (between any two terminals or between any terminal and earth ground)
- Operating temperature : 0°C ~ 50°C
- Operating relative humidity: ≤ 80%RH
- Protection level: IP65 (Dust, Water spray)
SKU: n/a
