-33%
HANDHELD DEVICES, Multimeters, MULTIMETERS, Sonel
CMM-10 Multimeters
Availability:
110 in stock
- AC and DC voltage
- AC and DC current
- Resistance
- Capacitance
- Frequency
- Duty cycle
- Temperature
- Diode test
- Continuity
6,400.00 ₹ 9,500.00 ₹
110 in stock
CompareRelated products
-
Insulation resistance meters, Sonel
MIC-5001 Insulation Resistance Meters
- Continuous reading of measured insulation resistance or leakage current
- Automatic discharge of the measured object’s capacitance upon completion of insulation resistance measurement
- Sound signalling of fi ve-second time intervals, facilitating capture of time characteristics
- Timing of measurement time T1, T2 and T3 for measurement of dielectric absorption ratio (DAR) and polarization index (PI)
- Reading of actual measurement voltage during measurement
- Protection against measurement of live objects
- Two- or three-lead method of insulation resistance measurement
- Power supplied by accumulator
- Instruments meet the requirements laid down by standard EN 61557
- The meter can be powered and charged from an external power adapter or from a car lighter socke
SKU: n/a -
LOCATION OF CORDS AND CABLES, FAULT DETECTION, Sonel
LKO-720
- Receiver operation with max. 4 transmitters at the same time to locate interruptions or distinguish wires.
- Receiving status information from the LKN-720 transmitter.
- The function 3D – detecting the direction of current.
- An LED torch.
- Headphone socket.
- Software upgrade via USB.
- Screen backlight for work in the dark.
SKU: n/a -
Short Circuit Loop Measurements, Sonel
MZC-330S
- Measurement of very low short circuit loop impedances (with resolution 0,1 mΩ) with a current of 130 A at 230 V; maximum 300 A at 690 V.
- Measurement with a current of 24 A at 230 V, maximum 37 A at 690 V with resolution 0,01 Ω.
- Measurements in installations with rated voltages: 110/190 V, 115/200 V, 127/220 V, 220/380 V, 230/400 V, 240/415 V, 290/500 V and 400/690 V and frequencies 45…65 Hz.
- Ability to perform measurements in short circuit system: phase-phase, phase-PE, phase-N.
- Differentiation between the phase voltage and the inter-phase voltage while calculating the short circuit current.
- Ability to change the length of test lead (measurement with 2p method).
- 4p (four-pole) method, test leads do not require calibration (measurement with current up to 300 A).
- Measurement of resistance (RS) and reactance (XS) components.
SKU: n/a -
Earth resistance and resistivity meters, Sonel
MRU-30 Earth Resistance And Resistivity Meters
- Measurement of auxiliary electrode resistances RS and RH
- Measurement of interference voltage
- Measurement in the presence of interference voltages in networks with frequencies of 50 Hz and 60 Hz
- Selection of maximum measurement voltage (25 V and 50 V)
- In ground resistivity measurements, distances between electrodes can be input in meters (m) or feet (ft)
SKU: n/a
