Product Description
3-3/4 Digits, LCD, Data Hold, 30mm Jaw Size, AC/DC Voltage, AC/DC Current up to 1000A, Resistance, Capacitance, Temperature, Frequency, Duty Cycle, Diode & Continuity Test.
-26%
CLAMP METER, DIGITAL AC/DC CLAMP METER, Metravi
DT-4250 Digital AC/DC Clamp Meter
Availability:
6 in stock
- Data Hold Facility
- Double molded body with rubber coating
- Clamp Jaw Size: 30mm
- Display : 3-3/4 Digital 3999 Counts Backlit LCD
- DC Voltage : 0 – 400m/4/40/400/600V.
- Accuracy : ±0.8%
- Diode Test and Continuity Test
- Confirms to CE, IEC 61010, CAT-III 600V
7,420.00 ₹ 10,017.00 ₹
6 in stock
Technical data
Specification
Model
DT-4250
Brand
Metravi
Colour
Yellow-Black
Warranty
One year against manufacturing defects
Display
Backlit LCD
AC or AC/DC
AC/DC
Data Hold
Data Hold
Overload Indication
Overload Indication
Jaw Dia
30mm
Auto Power Off
Auto Power-off
Diode & Continuity
Diode & Continuity test
Low Battery Indication
Low Battery Indication
Power Source
Battery Operated
Battery Type
Alkaline
Battery Size
9V
No of Batteries
1
AC Current Accuracy
±3.0%
DC Current Range
0 – 40A / 400A / 1000A
DC Current Accuracy
±2.8%
DC Voltage Range
0 – 400mV / 4V / 40V / 400V / 600V
DC Voltage Accuracy
±0.8%
AC Voltage Range
0 – 400mV / 4V / 40V / 400V / 600V
AC Voltage Accuracy
±0.8%
Resistance Range
0 – 400Ω / 4kΩ / 40kΩ / 400kΩ / 4MΩ / 40MΩ
Resistance Accuracy
±1.0%
Capacitance Range
0–40nF/400nF/4uF/40uF/100uF
Capacitance Accuracy
±3.0%
Frequency Range
0–5Hz/50Hz/500Hz/5kHz/50kHz/100kHz
Frequency Accuracy
±1.2%
Certifications
CAT-II 1000V, CAT-III 600V, CE, IEC 61010, Pollution Grade 2
Duty Cycle Range
0.5% to 99%
Related products
-
CALIBRATOR, MV MA CALIBRATOR, MV MA WITH LOOP CALIBRATOR, Metravi
M-05S mV mA Loop Calibrator
- Power Supply: Internal 24V circuit power supply
- Maintenance setup functions
- Auto power-off
- Backlight
- LED Flashlight
- Segment code is displayed on the LCD with a white backlight.
- Power: 3 AA battery cells
- Low-battery detection
- Small, firm, reliable, suitable for field use
- Electrical safety: EN61010-1:2001
- Withstand voltage: AC3540V(50/60Hz)/5 seconds between terminal and housing.
- Insulation impedance: DC1000V/100MΩ or more between terminal and housing.
SKU: n/a -
CALIBRATOR, RTD CALIBRATOR, Metravi
CAL-408 Bench-type RTD Calibrator
- Portable type
- 14 Fixed range Selectable Outputs
- Outputs available at : -200, -100, -50, -25, 0, 25, 50, 100, 150, 200, 300, 400, 500, 600°C
- Accuracy : ±0.05% Ohm of FSR
- Compensation : Long Wire Compensation of 100m. sensor cable
SKU: n/a -
CALIBRATOR, MV MA WITH LOOP CALIBRATOR, THERMOCOUPLE CALIBRATOR, UNIVERSAL CALIBRATOR, Metravi
CAL-600 Universal Calibrator
CALIBRATOR, MV MA WITH LOOP CALIBRATOR, THERMOCOUPLE CALIBRATOR, UNIVERSAL CALIBRATOR, MetraviCAL-600 Universal Calibrator
- Hand Held, Battery Operated
- Extra Large LCD Display
- Displays both output and measurements
- In the output / measurement mode following are available:
- DC Voltage: 0 – 24mV / 100mV / 15V
- Accuracy: ±0.2%
- DC Current: 0 – 24mA
- Accuracy: ±0.2%
- Step wise output of 4/8/12/16/20/24mA
- Passive Current output: 0 – 24mA
- Accuracy: ±0.2%
- 24V Loop Power Output
- Resistance Source: 15Ω ~ 400Ω
- Resistance Measurement: 0Ω ~ 400Ω
- Accuracy: ±0.2%
SKU: n/a -
Acidity Testing Kit, Metravi
ATK Acidity Testing Kit
- Used to measure Acidity content of Transformer Oil
- Portable equipment with test tubes to conduct the tests
- A set of chemical reactions need to be conducted to evaluate acidity of transformer oil
- Test Set consists of Ethyl Alcohol, Sodium Carbonate Solution, Universal Indicator, Test Tubes, Graduated Dropper
- Color chart calibrated with neutralization number values and instruction manual is also provided.
SKU: n/a
