Product Description
3-1/2 Digits, Backlit LCD, Fully Protected, Data Hold, AC Voltage, DC Voltage, DC Current, Resistance, Diode & Continuity Test.
-26%
Metravi, MULTIMETER, DIGITAL MULTIMETER
XB-30 Digital Multimeter
Availability:
6 in stock
- Display: 1999 (3 ½) Count , 15mm Backlit LCD
- Auto Power Off
- Over Load Protection of 500V DC/AC RMS
- DC Voltage: 0-200mV/2V/20V/200V/600V
- Accuracy: ±0.5%
- AC Voltage: 0-200V/600V
- Accuracy: ±1.2%
- DC Current: 0-2000µA/20mA/200mA/10A
- Accuracy: ±1.0%
- Resistance: 0-200/2K/20K/200K/2M.ohms
- Accuracy: ±1.0%
- Battery Test: 9V/1.5V
- With Diode Test, Continuity Test and Data Hold.
- Confirms to CE, CAT-III 600V, IEC 1010-1
1,500.00 ₹ 2,025.00 ₹
6 in stock
Technical data
Specification
Model
XB-30
Brand
Metravi
Warranty
One year against manufacturing defects
Display
Backlit LCD
Colour
Yellow-Black
Auto Power Off
Auto Power-off
Data Hold
Data Hold
Overload Indication
Overload Indication
Polarity
Automatic
Sampling Time
2 times/sec
Low Battery Indication
Low Battery Indication
Power Source
Battery Operated
Battery Type
Alkaline
Battery Size
9V
No of Batteries
1
Diode & Continuity
Diode & Continuity test
DC Voltage Range
0–200mV/2V/20V/200V/600V
DC Voltage Accuracy
±0.5%
AC Voltage Range
0-200V/600V
AC Voltage Accuracy
±1.2%
DC Current Range
0-2000µA/20mA/200mA/10A
DC Current Accuracy
±1%
Resistance Range
0-200Ω/2kΩ/20kΩ/200kΩ/2MΩ
Resistance Accuracy
±1.0%
DC Voltage Resolution
0.1mV to 1V
AC Voltage Resolution
0.1V to 1V
DC Current Resolution
1µA to 10mA
Resistance Resolution
0.1Ω to 1kΩ
Certifications
CAT-III 600V, CE, IEC 1010-1
Related products
-
CALIBRATOR, EARTH & GROUND TESTER CALIBRATOR, Metravi
CAL-ER Earth and Ground Tester Calibrator
- Connection: 4-wire method
- Insulation Resistance: 10MΩ above(between the circuit and shell 500V)
- Safety Standards: IEC61010-1，CAT Ⅲ 600V，Polluted Gradation
- Package includes: Meter, Test Leads (2 Black, 2 Red), Carry Bag, User Manual, Test Certificate
SKU: n/a -
CALIBRATOR, MV MA WITH LOOP CALIBRATOR, THERMOCOUPLE CALIBRATOR, UNIVERSAL CALIBRATOR, Metravi
CAL-600 Universal Calibrator
CALIBRATOR, MV MA WITH LOOP CALIBRATOR, THERMOCOUPLE CALIBRATOR, UNIVERSAL CALIBRATOR, MetraviCAL-600 Universal Calibrator
- Hand Held, Battery Operated
- Extra Large LCD Display
- Displays both output and measurements
- In the output / measurement mode following are available:
- DC Voltage: 0 – 24mV / 100mV / 15V
- Accuracy: ±0.2%
- DC Current: 0 – 24mA
- Accuracy: ±0.2%
- Step wise output of 4/8/12/16/20/24mA
- Passive Current output: 0 – 24mA
- Accuracy: ±0.2%
- 24V Loop Power Output
- Resistance Source: 15Ω ~ 400Ω
- Resistance Measurement: 0Ω ~ 400Ω
- Accuracy: ±0.2%
SKU: n/a -
CALIBRATOR, MV MA CALIBRATOR, Metravi
CAL-400-3 mV mA Calibrator
- Consists of a transmitter and a receiver
- Used to detect or trace conductors and to find short faults in them.
- Conductor tracing in the soil
- Detecting fuses and assigning current circuits
- Tracing sockets and distribution sockets having accidentally been covered by plastering
- Detecting interruptions and short-circuits in floor heating
- Tracing metallic water and heating piping
- Automatic and manual sensitivity adjustment
- Acoustic reception signal may be switched off
- Auto-Power-Off function
- Backlit LCD
SKU: n/a -
CABLE FAULT LOCATOR, DIGITAL CABLE FAULT LOCATOR, TELECOM CABLE FAULT LOCATOR, Metravi
TDRL-912 Telecom Cable Fault Locator
CABLE FAULT LOCATOR, DIGITAL CABLE FAULT LOCATOR, TELECOM CABLE FAULT LOCATOR, MetraviTDRL-912 Telecom Cable Fault Locator
- Digital Gain Adjustment Control: to make the gain adjustment very easy.
- Digital Waveform Automatic Identification technique: to make sure there is no test dead zone.
- Top-grade ARM single chip micro-computer: enables calculations and judge fault waveforms accurately.
- Display: Large colourful LCD, easy and simple to use.
- Power: High-energy Li-ion battery, provides continuous
- Working Capacity: for 10 hours (post full charge)
- Max range: 8 kms (16kms/32kms are optional)
- Highest resolution: 1m
- Dead Zone: 0m
- Power consumption: 1W
- Package includes: Fault Locator, 2 Test Lines, Charger, Carrying Bag, User Manual, CD with Software & U-Disk (only for USB function)
SKU: n/a
