Product Description
Transformer Turns Ratio Set to measure ratio in the range of 0.800 to 2021 & for Phase Deviation Measurement
-26%
Metravi, TRANSFORMER TURNS RATIO SET
TTRS-100 Transformer Turns Ratio Set
Availability:
6 in stock
- Perfectively suitable to measure actual turns ratio of a transformer
- Measures percentage ratio & Phase errors directly
- The polarity of the transformer under test is also indicated
- Measurements are carried out in 10 ranges arranged in a 1, 2,5,10 sequence.
- The measuring span has a range of ratios from 0.800 to 2021
- The ratio resolution is 0.01%.
- Phase deviation measurements are carried out in two ranges.
- Accuracy: ±0.1% of reading
133,000.00 ₹ 179,550.00 ₹
6 in stock
CompareRelated products
-
Battery Impedance Tester, Solar Tools, Metravi
TM-6002 Battery Impedance Tester
- Large Backlit LCD Display
- Data Logging up to 9999 sets
- Resistance Measurement: 10uΩ to 40Ω
- Voltage Measurement: 1mV to 40V
- Temperature Measurement: -20° to 60°C
- DC Current Measurement: 0.6A to 700A DC
- Measures internal impedance and open circuit voltage of the secondary batteries, including Nickel-metal Hydride (NiMH), Nickel-cadmium (NiCd), Lithium-ion (Li-ion), Alkaline and Lead-acid batteries.
- AC four-terminal method to measure the internal impedance by eliminating lead impedance and contact impedance to get accurate results.
SKU: n/a -
Calibrator, Metravi
PM-29 Process Meter
- Digital Process Calibrator cum Multimeter
- Display: Backlit LCD, 4 digit display for measurement, 5 digit display for output
- Confirms to IEC61010-1 (CATIV 600V, CATIII 1000V, Pollution Level II
- Overload Protection
- Surge Protection
- Developed, designed and produced according to ISO 9001
SKU: n/a -
Cable Fault Locator, Metravi
TDRL-912 Telecom Cable Fault Locator
- Digital Gain Adjustment Control: to make the gain adjustment very easy.
- Digital Waveform Automatic Identification technique: to make sure there is no test dead zone.
- Top-grade ARM single chip micro-computer: enables calculations and judge fault waveforms accurately.
- Display: Large colourful LCD, easy and simple to use.
- Power: High-energy Li-ion battery, provides continuous
- Working Capacity: for 10 hours (post full charge)
- Max range: 8 kms (16kms/32kms are optional)
- Highest resolution: 1m
- Dead Zone: 0m
- Power consumption: 1W
- Package includes: Fault Locator, 2 Test Lines, Charger, Carrying Bag, User Manual, CD with Software & U-Disk (only for USB function)
SKU: n/a -
Calibrator, Metravi
709H mV mA Loop Calibrator with HART Communication
- Compact Loop Calibrator with HART communication
- Able to read basic device information and execute diagnostic tests
- High precision ±0.01%
- High resolution 0.001mA
- Automatic Ramp & Step
- High visibility 3.2″ TFT colour display with backlight
- Supports SCPI
- Auto Power Off and Low Battery display
- Max. permitted voltage: 30V (between any two terminals or between any terminal and earth ground)
- Operating temperature : 0°C ~ 50°C
- Operating relative humidity: ≤ 80%RH
- Protection level: IP65 (Dust, Water spray)
SKU: n/a
