-16%
LOCATION OF CORDS AND CABLES, FAULT DETECTION, Sonel
LKO-720
Availability:
1 in stock
- Receiver operation with max. 4 transmitters at the same time to locate interruptions or distinguish wires.
- Receiving status information from the LKN-720 transmitter.
- The function 3D – detecting the direction of current.
- An LED torch.
- Headphone socket.
- Software upgrade via USB.
- Screen backlight for work in the dark.
155,000.00 ₹ 184,520.00 ₹
1 in stock
CompareRelated products
-
Insulation resistance meters, Sonel
MIC-2501 Insulation Resistance Meters
- Measurement voltage within the range of 100…2500 V, selected in steps of 100 V
- Continuous reading of measured insulation resistance or leakage current
- Automatic discharge of the measured object’s capacitance upon completion of insulation resistance measurement,
- Sound signalling of five-second time intervals, facilitating capture of time characteristics
- Timed measurement times T1 , T2 and T3 for measurement of absorption coefficients (Ab/PI/DAR) at 15, 60 and 600 s and polarization index
- Reading of actual measurement voltage during measurement
- Protection against measurement of live objects
SKU: n/a -
Photovoltaic Measurements, Sonel
IRM-1 MPI
- Measurement of solar radiation and temperature.
- The LoRa interface for communication with a master meter – offers a larger range than the Bluetooth technology!
- Automatic data synchronization with a master meter with reSYNC function.
- Built-in compass and inclination sensor.
- Built-in recorder that can be used to record solar radiation before constructing PV systems, as well as to measure the shading of existing systems.
- Large measurement memory: 999 cache memory cells and 5000 recorder records available (one-time recording) with the option of overwriting them (continuous recording).
SKU: n/a -
ELECTRICAL SAFETY MEASUREMENTS, SHORT CIRCUIT LOOP MEASUREMENTS, Sonel
MZC-304F
- Fault loop impedance measurement with 0.01 Ω resolution.
- Low-current impedance measurement in circuits protected by RCD ≥ 30mA with 0.01 Ω resolution (range of 180…270 V)
- Operates in networks with voltages 220/380 V, 230 V/400 V, 240/415 V (operating range 180…460 V)
- Operating voltage range: 180…270 V (for ZL-PE and ZL-N) and 180…460 V (for ZL-L).
- Maximum measuring current: 7.6 A for 230 V (3×10 ms), 13.3 A for 400 V (3×10 ms).
- Operating frequency 45…65 Hz
- Calculation of Ik fault current.
- Measurement with swapped L and N conductors.
- Measurement of resistance (RS) and reactance (XS) components.
- Low-voltage measurement of continuity of circuit and resistance.
SKU: n/a -
HANDHELD DEVICES, MULTIMETERS, Sonel
CMM-60 Multimeters
- The automatic holding of the measurement result while working with both hands is now possible thanks to the AutoHold function,
- Measurements of the current loop 4-20 mA in analogue circuits controlling temperature, pressure, humidity or flow sensors are possible thanks to the special function that displays the percentage results for the corresponding current values,
- The meter allows the measurement of very small currents in the range of 500 μA, useful during service works, e.g. in tests of real-time clock support systems or in the maintenance of flame sensors in combustion chambers,
- Thanks to the dedicated “CMM-60 Multimeter Software”, it is possible to transfer results from the meter’s memory to a computer program and analyse these results further,
- Visibility in all conditions and reading at a wide angle are possible thanks to the colour display with a resolution of 320 x 240 pixels and a diagonal of 3.5”,
- Operating the meter in thick gloves during industrial measurements will not be a problem thanks to the specially designed rotary switch
SKU: n/a
