-29%
HANDHELD DEVICES, MULTIMETERS, Sonel
CMM-40 Multimeters
Availability:
10 in stock
- MAX and MIN function for saving extreme values
- AC+DC function for reading the sum of an alternating and direct component
- REL mode for relative measurement to a stored reference value
- PEAK Hold for displaying the peak value of the measured parameter.
15,220.00 ₹ 21,512.00 ₹
10 in stock
CompareRelated products
-
HANDHELD DEVICES, MULTIMETERS, Sonel
CMM-60 Multimeters
- The automatic holding of the measurement result while working with both hands is now possible thanks to the AutoHold function,
- Measurements of the current loop 4-20 mA in analogue circuits controlling temperature, pressure, humidity or flow sensors are possible thanks to the special function that displays the percentage results for the corresponding current values,
- The meter allows the measurement of very small currents in the range of 500 μA, useful during service works, e.g. in tests of real-time clock support systems or in the maintenance of flame sensors in combustion chambers,
- Thanks to the dedicated “CMM-60 Multimeter Software”, it is possible to transfer results from the meter’s memory to a computer program and analyse these results further,
- Visibility in all conditions and reading at a wide angle are possible thanks to the colour display with a resolution of 320 x 240 pixels and a diagonal of 3.5”,
- Operating the meter in thick gloves during industrial measurements will not be a problem thanks to the specially designed rotary switch
SKU: n/a -
Power Quality Analysis, Sonel
PQM-700 Power Quality Analysis
- 4 current inputs, physical measurement of current in the neutral conductor.
- Registration of up to 1100 parameters, including average, maximum, minimum and instantaneous values.
- Built-in heater, stable operation at low temperatures down to -20ºC.
- Internal rechargeable battery, autonomy of the meter (min. 6 hours).
- IP65 ingress protection, possibility of work in rain, snow and high humidity
SKU: n/a -
Insulation resistance meters, Sonel
MIC-10K1 Insulation Resistance Meters
- Continuous indication of measured insulation resistance or leakage current
- Automatic discharge of measured object capacitance-voltage after the end of insulation resistance measurement
- Acoustic signaling of 5-second intervals to facilitate capturing time characteristics
- Adjustable measuring time – up to 99’59’’
- T1, T2, and T3 test times for measuring one or two absorption coefficients from the range of 1…600 s
- Polarization index (PI), absorption coefficients Ab1, Ab2 and dielectric absorption ratio (DAR) measurement
- Indication of actual test voltage during measurement
- 1.2 mA, 3 mA, or 6 mA test current
- Insulation resistance measurement using two- or three-wire method
- Measurements with test leads up to 20 m
- Protection against measuring live objects
SKU: n/a
