Product Description
50kV Motor operated Oil Test Set
-26%
Metravi, OIL TEST SET, MOTORISED OIL TEST SET
50-MOTS Motorised Oil Test Set
Availability:
6 in stock
- It is ideal for speedy and accurate testing of di-electric strength of transformer and circuit beaker oil under test room condition in accordance with IS:6792-1972 for oil testing.
- Input: 230V Single Phase AC 50Hz.
- Output: Continuously variable from 0 to 50kV AC with centre point of the HV winding earthed
- Capacity: Spread over a range from 500VA to 1200VA depending on the output voltage
- Duty: Intermittent duty cycle
- Nature of Cooling: The transformer is cast resin type air cooled
- Motor Operated
45,000.00 ₹ 60,750.00 ₹
6 in stock
Technical data
Specification
Model
50-MOTS
Brand
Metravi
Warranty
One year against manufacturing defects
Related products
-
CALIBRATOR, MV MA CALIBRATOR, MV MA WITH LOOP CALIBRATOR, Metravi
M-05S mV mA Loop Calibrator
- Power Supply: Internal 24V circuit power supply
- Maintenance setup functions
- Auto power-off
- Backlight
- LED Flashlight
- Segment code is displayed on the LCD with a white backlight.
- Power: 3 AA battery cells
- Low-battery detection
- Small, firm, reliable, suitable for field use
- Electrical safety: EN61010-1:2001
- Withstand voltage: AC3540V(50/60Hz)/5 seconds between terminal and housing.
- Insulation impedance: DC1000V/100MΩ or more between terminal and housing.
SKU: n/a -
CALIBRATOR, VIBRATION CALIBRATOR, Metravi
VIB-CAL-01 Handheld Vibration Calibrator
- Frequency : 159.2Hz +0.5%
- Amplitude : Acceleration : 9.81 m/s2 RMS
- Velocity : 9.81mm/sec RMS
- Displacement : 9.81 micron RMS
- Accuracy : ± 5%
- Distortion : < 3%
- Maximum load : 120 grams
- Power : 9V Rechargeable Battery (Upto 1.5 hours operation)
- Charge time : 15 hours
- Sensor Mounting base : M5 tapped hole
- Operating Temperature : 0°C to 55°C
- Operating Humidity : 90% non–condensing
SKU: n/a -
CABLE FAULT LOCATOR, DIGITAL CABLE FAULT LOCATOR, Metravi
CFL-01 Cable Fault Locator with Pipe and Cable Tracer
CABLE FAULT LOCATOR, DIGITAL CABLE FAULT LOCATOR, MetraviCFL-01 Cable Fault Locator with Pipe and Cable Tracer
- Consists of a transmitter and a receiver
- Used to detect or trace conductors and to find short faults in them.
- Conductor tracing in the soil
- Detecting fuses and assigning current circuits
- Tracing sockets and distribution sockets having accidentally been covered by plastering
- Detecting interruptions and short-circuits in floor heating
- Tracing metallic water and heating piping
- Automatic and manual sensitivity adjustment
- Acoustic reception signal may be switched off
- Auto-Power-Off function
- Backlit LCD
SKU: n/a -
CALIBRATOR, MV MA CALIBRATOR, MV MA CALIBRATOR WITH HART COMMUNICATION, MV MA WITH LOOP CALIBRATOR, Metravi
709H mV mA Loop Calibrator with HART Communication
CALIBRATOR, MV MA CALIBRATOR, MV MA CALIBRATOR WITH HART COMMUNICATION, MV MA WITH LOOP CALIBRATOR, Metravi709H mV mA Loop Calibrator with HART Communication
- Compact Loop Calibrator with HART communication
- Able to read basic device information and execute diagnostic tests
- High precision ±0.01%
- High resolution 0.001mA
- Automatic Ramp & Step
- High visibility 3.2″ TFT colour display with backlight
- Supports SCPI
- Auto Power Off and Low Battery display
- Max. permitted voltage: 30V (between any two terminals or between any terminal and earth ground)
- Operating temperature : 0°C ~ 50°C
- Operating relative humidity: ≤ 80%RH
- Protection level: IP65 (Dust, Water spray)
SKU: n/a
