Metravi
Showing 1–24 of 103 results
-
CALIBRATOR, UNIVERSAL SOURCE CALIBRATOR, Metravi
11+ Universal Source Calibrator
- Provides 25% step or 100% step DC Current output current manually or Automatically.
- TC Source terminals and built in lead connector of same temperature, The unit can be converted between °C & °F
- Auto Power Off
- Display : 6 Digits white backlight LED on the LCD
- Technical Specifications
- DC voltage : 0 – 100mV/1V/10V
- Resolution : 1µV/10µV/0.1mV
- Accuracy : ±0.02%
- DC Current : 0 – 20mA
- Resolution : 1µA
- Accuracy : ±0.02%
SKU: n/a -
DATA LOGGER, TEMPERATURE AND HUMIDITY DATA LOGGER, TEMPERATURE AND HUMIDITY METER, THERMO-HYGRO METER, SOLAR TOOLS, ELCB TESTER, Metravi
1810D ELCB Tester
DATA LOGGER, TEMPERATURE AND HUMIDITY DATA LOGGER, TEMPERATURE AND HUMIDITY METER, THERMO-HYGRO METER, SOLAR TOOLS, ELCB TESTER, Metravi1810D ELCB Tester
- 2000mS readout for testing latest delay action breakers
- Fully programmed operation
- Accurate digital read out of tripping time
- Two LED lamps give quick check for correct wiring
- Operates from mains supply. No need for batteries
- Compact, lightweight and simple to operate
- Zero cross circuitry permits testing at 0°and 180°portion of sine wave. At these two tests minimum (best) and maximum (worst) trip times will be displayed
- Trip Current Setting: 5mA, 10mA, 30mA, 100mA, 300mA, 500mA
- Operating Voltage: 220 / 230 / 240V AC, 50/60Hz
SKU: n/a -
LUX METER, SOLAR IRRADIANCE AND POWER METER, SOLAR TOOLS, Metravi
207 Solar Power / Sunlight Meter
- Sunlight Measurement up to 1999W/m2 or 634BTU /(Ft2*hr)
- High Accuracy and Fast Response
- Data Hold function
- Unit and sign display for easy reading
- Measuring unit selectable between W/m2 and BTU/(Ft2*hr)
- Direct Reading with no adjustments
- Max / Min value recording
- Low Battery Indication
- 3-1/2 Digits LCD Display
- Resolution 1W/m2 ; 1 BTU /(Ft2*hr)
- Accuracy: ± 10W/m2
SKU: n/a -
Metravi, MULTIMETER, ANALOGUE MULTIMETER
250TR Analogue Multimeter
- Hand Held Multimeter
- DC Voltage : 0 – 2.5V/10V/50V/250V/1000V
- Accuracy : ± 5%
- AC Voltage : 0 – 10V/50V/250V/1000V
- Accuracy : ± 5%
- DC Current : 0 – 10mA/250mA
- Resistance : 0 – 20k / 2MΩ
- Accuracy : ± 5%
- Battery Test : 1.5V / 9V
- Accuracy : ± 5%
- Decibel : -22 to 20dB
- Confirms to IEC 61010, CAT-II 300V
SKU: n/a -
CLAMP METER, CLAMP-ON POWER METER, POWER QUALITY ANALYSER, CLAMP-ON POWER QUALITY ANALYSER, Metravi
307N Digital Clamp On Power Meter
CLAMP METER, CLAMP-ON POWER METER, POWER QUALITY ANALYSER, CLAMP-ON POWER QUALITY ANALYSER, Metravi307N Digital Clamp On Power Meter
- Measures Power and Energy for single phase and three phase loads
- Auto-ranging
- Data Logging up to 99 Data
- Sleep Mode
- Clamp Jaw Dia: 56mm
- Confirms to CAT III 600V, IEC 61010, CAT IV 300V
- Non Contact Voltage Detector
- Data Hold, Max / Min record
- USB PC Interface
- Display; 4 digits Triple Backlit LCD Display with analogue bargraph
SKU: n/a -
Metravi, MULTIMETER, BENCH-TYPE MULTIMETER
45-TRMS Bench Type Multimeter
- Power supply: 220V/ 110V AC
- Manual range
- 41/2-digit large LCD display with back light(displaying range: 75 x 40 mm), max.reading: 19999
- Voltage measurement up to 1000VDC and 750V AC
- DC,AC current up to 20A
- ACV frequency response: 50kHz
- Frequency, Resistance, Capacitance measurement, Triode, Diode check and Continuity Test
- Overload protection: 250V rms
- Operation environment: 0°C-40°C,<75%R.H
- Dimension: 260mm x 220mm x 82mm
- Weight: approx. 1 kg
SKU: n/a -
LCR METER, DIGITAL HAND-HELD LCR METER, LCR METER WITH MULTIMETER, MULTIMETER WITH LCR METER, Metravi
451 Digital LCR Meter with Multimeter
LCR METER, DIGITAL HAND-HELD LCR METER, LCR METER WITH MULTIMETER, MULTIMETER WITH LCR METER, Metravi451 Digital LCR Meter with Multimeter
- Peak Hold facility
- Display: 3-1/2 Digital 1999 Counts Backlit LCD
- Low Battery and Overload Indication
- Confirms to IEC1010 Standards
- Auto Power Off
- DC Voltage : 0 – 200mV/2V/20V/200V/1000V
- Accuracy : ±0.5%
- AC Voltage : 0 – 200mV/2V/20V/200V/750V
- Accuracy : ±0.8%
- DC Current : 0 – 2mA/20mA/200mA/20A.
- Accuracy : ±0.8%
SKU: n/a -
IC TESTER, DIGITAL IC TESTER, Metravi
460 Digital Hand-held LCR Meter
- Self Diagnosis
- Identifies Unknown model number of Devices
- Measures more than 2000 kinds of devices
- Tests 54 / 74 series TTL
- Tests 4000 and 4500 series CMOS
- 40 Pin capability
- Control: 16 key tact switch keypad with dual tone sound indication
- Display: 6 Digit LED Display
- Test Socket: 40 pin ZIF Socket
SKU: n/a -
Metravi, OIL TEST SET, MOTORISED OIL TEST SET
50-MOTS Motorised Oil Test Set
- It is ideal for speedy and accurate testing of di-electric strength of transformer and circuit beaker oil under test room condition in accordance with IS:6792-1972 for oil testing.
- Input: 230V Single Phase AC 50Hz.
- Output: Continuously variable from 0 to 50kV AC with centre point of the HV winding earthed
- Capacity: Spread over a range from 500VA to 1200VA depending on the output voltage
- Duty: Intermittent duty cycle
- Nature of Cooling: The transformer is cast resin type air cooled
- Motor Operated
SKU: n/a -
Metravi, MICROOHMS METER, 1A MICROOHMS METER
53C 1A Micro Ohms Meter
- Compact Highly Reliable 3-1/2 Digit Instrument
- Uses 4 Terminal Measurement method
- Has 12.5 mm high 7 segment 3-1/2 Digits LED Display
- Range : 0 – 1999u / 19.99m / 199.9m / 1.999 / 19.99 / 199.9 / 1999 /19.99K Ohms
- Accuracy : + 0.3% + 2 dgs
- Normal Test Current : 1.5 / 0.75 / 0.75 / 75m / 7.5m/ 0.75m / 0.075mA
- Warm up Time : 3 minutes
- Input : 230V Single Phase AC 50Hz
- Complete with instruction manual, mains chord and test leads
SKU: n/a -
Metravi, OIL TEST SET, MANUAL OIL TEST SET
60-OTS Manual Oil Test Set
- It is ideal for speedy and accurate testing of di-electric strength of transformer and circuit beaker oil under test room condition in accordance with IS:6792-1972 for oil testing.
- Input: 230V Single Phase AC 50Hz.
- Output: Continuously variable from 0 to 60kV AC with centre point of the HV winding earthed
- Capacity: Spread over a range from 500VA to 1200VA depending on the output voltage
- Duty: Intermittent duty cycle
- Nature of Cooling: The transformer is cast resin type air cooled
- Manually Operated
SKU: n/a -
CALIBRATOR, MV MA CALIBRATOR, MV MA CALIBRATOR WITH HART COMMUNICATION, MV MA WITH LOOP CALIBRATOR, Metravi
709H mV mA Loop Calibrator with HART Communication
CALIBRATOR, MV MA CALIBRATOR, MV MA CALIBRATOR WITH HART COMMUNICATION, MV MA WITH LOOP CALIBRATOR, Metravi709H mV mA Loop Calibrator with HART Communication
- Compact Loop Calibrator with HART communication
- Able to read basic device information and execute diagnostic tests
- High precision ±0.01%
- High resolution 0.001mA
- Automatic Ramp & Step
- High visibility 3.2″ TFT colour display with backlight
- Supports SCPI
- Auto Power Off and Low Battery display
- Max. permitted voltage: 30V (between any two terminals or between any terminal and earth ground)
- Operating temperature : 0°C ~ 50°C
- Operating relative humidity: ≤ 80%RH
- Protection level: IP65 (Dust, Water spray)
SKU: n/a -
Metravi, PROCESS CLAMP METER, PROCESS METER
771+ Digital Milliamp Process Clamp Meter
- Hand-Held, Milli Amp Process Clamp Meter
- 4-20 mA DC measurement without breaking the electrical circuit
- With removable jaw connected to the body using an extension cable
- Battery Operated
- High Precision
- Built-in flashlight to access dark areas with ease
- Jaw Dia: 4.5mm
- Current Ranges 0mA ~ ±20.99mA / ±21.0mA… ±99.9mA
- Resolution: 0mA~ ±20.99mA: 0.01mA , ±21.0mA~ ±99.9mA: 0.1mA
- Accuracy : 0mA~ ±20.99mA: 0.3% reading ±8 digits , ±21.0mA~ ±99.9mA: 1% reading ±8 digits
- Percentage Span display feature for 4 to 20 mA Loops
- Data Hold
SKU: n/a -
ELECTRICAL TESTER, SOCKET POLARITY AND EARTH LEAKAGE TESTER, Metravi
AC-6 Socket Polarity and Earth Leakage Tester
ELECTRICAL TESTER, SOCKET POLARITY AND EARTH LEAKAGE TESTER, MetraviAC-6 Socket Polarity and Earth Leakage Tester
- Socket Polarity and Earth Leakage Tester
- Tests Three Wire 220V AC outlets and Earth Leakage Circuit Breakers
- Can be tested with test currents from 10mA, 20mA, 25mA, 30mA and 35mA
- Power Supply: From Unit Under Test
- Confirms to CAT III 600V
- Electrical Safety: IEC 61010/EN 61010; IEC 61557-7/EN 61557-7
- Indicates the following Status: No Earth, Line Neutral Reversal, No Neutral, Line Earth Reversal, No Line
- Test Current: 10mA,15mA,20mA,25mA,30mA,35mA
SKU: n/a -
ELECTRICAL TESTER, PHASE SEQUENCE INDICATOR, Metravi
AC-7 Phase Sequence Indicator
- Phase Rotation Indicator
- Large LCD Display
- Three Phase Indication
- No Battery Required
- Nominal Voltage: 40V to 690V AC
- Frequency Range: 15 to 400Hz
- Power Supply: From Unit Under Test
- Electrical Safety: IEC 61010/EN 61010; IEC 61557-7/EN 61557-7
- Protection Level CAT III 600V, IP40
SKU: n/a -
Acidity Testing Kit, Metravi
ATK Acidity Testing Kit
- Used to measure Acidity content of Transformer Oil
- Portable equipment with test tubes to conduct the tests
- A set of chemical reactions need to be conducted to evaluate acidity of transformer oil
- Test Set consists of Ethyl Alcohol, Sodium Carbonate Solution, Universal Indicator, Test Tubes, Graduated Dropper
- Color chart calibrated with neutralization number values and instruction manual is also provided.
SKU: n/a -
ENVIRONMENTAL METER, ANEMOMETER, THERMO ANEMOMETER, Metravi
AVM-04 Thermo Anemometer
- Displays Air Velocity and Temperature at the same time
- Highly Sensitive and accurate
- Temperature Sensor Built-in with anemometer fan
- Low Power Consumption
- Data / Max / Min. Hold facility
- Auto Power Off
- Low Friction Ball bearing vane wheel for high accuracy
- Extra Large Dual LCD Display
- Range of wind speed in m/s: 0.0 to 45.0 m/s with an accuracy of ±3%
- Range of wind speed in knots: 0.0 to 88.0 knots with an accuracy of ±3%
SKU: n/a -
CALIBRATOR, BLACK BODY CALIBRATOR, Metravi
BB-500 Infrared Thermometer Black Body Calibrator
- Black Body is used to calibrate infrared thermometers
- Easily certify infrared thermometers up to 500°C (932°F)
- RTD Reference Well for high precision
- Small compact design
- Temperature Range : 50°C ~ 500°C (122°F ~ 932°F)
- Heating Time : 30 minutes to max
- Cooling Time : 30 minutes to 100 °C (122°F)
- Aperture Diameter : 58mm
- Power : 220VAC(±10%), 1.25A / 110VAC(±10%),2.5A
- Complete with carrying case and instruction manual
SKU: n/a -
Metravi, MULTIMETER, CLAMP-ON CURRENT ADAPTOR FOR MULTIMETER
CA-01 AC Clamp-on Current Adapter for Digital Multimeter
Metravi, MULTIMETER, CLAMP-ON CURRENT ADAPTOR FOR MULTIMETERCA-01 AC Clamp-on Current Adapter for Digital Multimeter
- Can be used with any Digital Multimeter with 200mV / 400mV / 600mV AC range
- Can measure AC Current up to 200A (cannot measure DC current)
- Provides output of 1mV/A
- Sensitivity: 1A/mV AC
- Accuracy: ±2%
- Clamp Jaw Size:16mm Dia.
SKU: n/a -
CALIBRATOR, MV MA CALIBRATOR, Metravi
CAL-400-3 mV mA Calibrator
- Consists of a transmitter and a receiver
- Used to detect or trace conductors and to find short faults in them.
- Conductor tracing in the soil
- Detecting fuses and assigning current circuits
- Tracing sockets and distribution sockets having accidentally been covered by plastering
- Detecting interruptions and short-circuits in floor heating
- Tracing metallic water and heating piping
- Automatic and manual sensitivity adjustment
- Acoustic reception signal may be switched off
- Auto-Power-Off function
- Backlit LCD
SKU: n/a -
CALIBRATOR, RTD CALIBRATOR, Metravi
CAL-408 Bench-type RTD Calibrator
- Portable type
- 14 Fixed range Selectable Outputs
- Outputs available at : -200, -100, -50, -25, 0, 25, 50, 100, 150, 200, 300, 400, 500, 600°C
- Accuracy : ±0.05% Ohm of FSR
- Compensation : Long Wire Compensation of 100m. sensor cable
SKU: n/a -
CALIBRATOR, MV MA WITH LOOP CALIBRATOR, THERMOCOUPLE CALIBRATOR, UNIVERSAL CALIBRATOR, Metravi
CAL-500 Universal Calibrator
CALIBRATOR, MV MA WITH LOOP CALIBRATOR, THERMOCOUPLE CALIBRATOR, UNIVERSAL CALIBRATOR, MetraviCAL-500 Universal Calibrator
- Hand Held, Battery Operated
- Extra Large LCD Display
- Displays both output and measurements
- In the output / measurement mode following are available:
- DC Voltage: 0 – 24mV / 100mV / 15V
- Accuracy: ±0.2%
- DC Current: 0 – 24mA
- Accuracy: ±0.2%
- Step wise output of 4/8/12/16/20/24mA
- Passive Current output: 0 – 24mA
- Accuracy: ±0.2%
- 24V Loop Power Output
SKU: n/a -
CALIBRATOR, MV MA WITH LOOP CALIBRATOR, THERMOCOUPLE CALIBRATOR, UNIVERSAL CALIBRATOR, Metravi
CAL-600 Universal Calibrator
CALIBRATOR, MV MA WITH LOOP CALIBRATOR, THERMOCOUPLE CALIBRATOR, UNIVERSAL CALIBRATOR, MetraviCAL-600 Universal Calibrator
- Hand Held, Battery Operated
- Extra Large LCD Display
- Displays both output and measurements
- In the output / measurement mode following are available:
- DC Voltage: 0 – 24mV / 100mV / 15V
- Accuracy: ±0.2%
- DC Current: 0 – 24mA
- Accuracy: ±0.2%
- Step wise output of 4/8/12/16/20/24mA
- Passive Current output: 0 – 24mA
- Accuracy: ±0.2%
- 24V Loop Power Output
- Resistance Source: 15Ω ~ 400Ω
- Resistance Measurement: 0Ω ~ 400Ω
- Accuracy: ±0.2%
SKU: n/a -
CALIBRATOR, EARTH & GROUND TESTER CALIBRATOR, Metravi
CAL-ER Earth and Ground Tester Calibrator
- Connection: 4-wire method
- Insulation Resistance: 10MΩ above(between the circuit and shell 500V)
- Safety Standards: IEC61010-1，CAT Ⅲ 600V，Polluted Gradation
- Package includes: Meter, Test Leads (2 Black, 2 Red), Carry Bag, User Manual, Test Certificate
SKU: n/a
