Shop
Showing 73–84 of 268 results
-
CLAMP METER, DIGITAL AC/DC CLAMP METER, Metravi
DT-4250 Digital AC/DC Clamp Meter
- Data Hold Facility
- Double molded body with rubber coating
- Clamp Jaw Size: 30mm
- Display : 3-3/4 Digital 3999 Counts Backlit LCD
- DC Voltage : 0 – 400m/4/40/400/600V.
- Accuracy : ±0.8%
- Diode Test and Continuity Test
- Confirms to CE, IEC 61010, CAT-III 600V
SKU: n/a -
CLAMP METER, DIGITAL TRMS AC/DC CLAMP METER, DIGITAL AC/DC CLAMP METER, Metravi
DT-425T Digital TRMS AC/DC Clamp Meter
-26%
CLAMP METER, DIGITAL TRMS AC/DC CLAMP METER, DIGITAL AC/DC CLAMP METER, MetraviDT-425T Digital TRMS AC/DC Clamp Meter
- 3-3/4 Digits 3999 Counts Backlit LCD Display
- Built-in Flash light to access dark Areas
- Non Contact Voltage Detector to show the presence of Voltage
- Sleek Ergonomic Design
- Confirms to IEC/EN 61010-1, IEC/EN 61010-2-032 & IEC/EN 61010-2-033
- Confirms to UL, CAT-III 600V
- Data Hold to Freeze Displayed Data
- MAX-MIN record function
- Relative measuring facility
- 30mm Jaw Dia
- Overload indication
SKU: n/a -
CLAMP METER, DIGITAL AC CLAMP METER, LEAKAGE CURRENT CLAMP METER, AC LEAKAGE CURRENT CLAMP METER, Metravi
DT-4671 AC Leakage Current Clamp Meter
-26%
CLAMP METER, DIGITAL AC CLAMP METER, LEAKAGE CURRENT CLAMP METER, AC LEAKAGE CURRENT CLAMP METER, MetraviDT-4671 AC Leakage Current Clamp Meter
- Auto Power Off
- Max / Min recording with Data Hold
- Clamp Jaw Size : 30mm
- Display : 3-3/4 Digits 3999 Counts LCD with 40 Segment analog Bargraph
- AC Voltage : 0 – 400V
- Accuracy : ±1.5%
- AC Current : 0 – 40m/400m/4A/40A/80A/100A
- Accuracy : ±1.0%
- Resistance : 40 – 400 Ohms
- Accuracy : ±1.0%
- Low Pass Filter for eliminating effect of High Frequency Noise.
SKU: n/a -
CLAMP METER, DIGITAL AC/DC CLAMP METER, Metravi
DT-8250 Digital AC/DC Clamp Meter
- Auto Power off
- Auto/Manual Ranging
- Data Hold
- Peak Hold
- Clamp Jaw Dia: 2″ (52mm) approx
- Display: 3-3/4 digits (4000 counts) Backlit LCD
- DC Voltage: 400mV/4V/40V/400V/1000V
- Accuracy: ± (3.5% + 10 digits)
- Diode and Continuity
SKU: n/a -
-
EMF / GAUSS METER, Metravi
EMF-823 Magnetic Field EMF ELF Meter
- Display: 3-1/2 digits LCD, maximum reading 1999.
- Range: 200/2000 mG,20/200µT.
- Resolution: 0.1/1 mG or 0.01/0.1 µT.
- Frequency response: 30Hz to 300Hz.
- Sensor: Single Axis
- Accuracy: ±(2.5%±6dgt) at 50Hz/60Hz.
- Over load Indication
- Battery: 9V
SKU: n/a -
EARTH/GROUND RESISTANCE TESTER, EARTH RESISTANCE TESTER, Metravi
ERT-1501 Digital Earth Resistance Tester with Kit
-26%
EARTH/GROUND RESISTANCE TESTER, EARTH RESISTANCE TESTER, MetraviERT-1501 Digital Earth Resistance Tester with Kit
- Data Hold facility
- Displays test result and battery voltage on the same screen
- LOCK Button for continuous HANDS FREE measurement
- Both Earth Resistance and Earth Resistivity can be measured
- Can be used in 4 Terminal and 3 Terminal configurations
- Display : 4 Digits EXTRA LARGE Backlit Dual LCD Display
- Earth Resistance Range : 0 – 10/100/1000 Ohms
- Accuracy : ±3% + 2d
- Low Resistance Range : 0 – 200 k.Ohms
SKU: n/a -
EMF / GAUSS METER, Metravi
ET-99A Thermo Anemometer
- Range : 0 ~ 3000mT (milli Tesla) / 0~30000G (Gauss)
- Unit Conversion : 1mT=10G(Gauss)
- Can display the N/S polarity of DC magnets
- Relative / Peak Hold / Real time Zero function
- USB PC interface, with software
- Power : 9V AAA*6
- Operating temperature and humidity: 5°C ~ 40°C
- External AC 100 ~ 240V to DC 9V/0.5A power supply
SKU: n/a -
ENVIRONMENTAL METER, ANEMOMETER, THERMO ANEMOMETER, MINI ENVIRONMENTAL TESTERS, Metravi
ET-99L Lux Meter
-26%
ENVIRONMENTAL METER, ANEMOMETER, THERMO ANEMOMETER, MINI ENVIRONMENTAL TESTERS, MetraviET-99L Lux Meter
- 4 Measuring Ranges in both Lux/FC
- High accuracy and rapid response
- Low battery Indication
- MAX/MIN mode
- REL measuring mode
- Data Hold mode
- Lux/FC unit switch
- Backlight can turn on and turn off
- Auto power-off (disabling option available)
- Range switch
- Auto and Manual range selection
- Tripod-mountable (tripod available at extra cost)
SKU: n/a -
ENVIRONMENTAL METER, MOISTURE METER, PIN-TYPE MOISTURE METER, MINI ENVIRONMENTAL TESTERS, Metravi
ET-99M Pin-type Moisture Meter
-26%
ENVIRONMENTAL METER, MOISTURE METER, PIN-TYPE MOISTURE METER, MINI ENVIRONMENTAL TESTERS, MetraviET-99M Pin-type Moisture Meter
- Wood/Building Material Modes
- WOOD MODE
Range: 6 to 99%
Accuracy: ±4%
Resolution: 0.1% - BUILD MODE
Range: 0.2 to 2%
Accuracy: ±0.1%
Resolution: 0.1% - Quick response
- Data Hold
- Auto Power-Off
- Low battery indication
SKU: n/a -
ENVIRONMENTAL METER, SOUND LEVEL METER, MINI ENVIRONMENTAL TESTERS, Metravi
ET-99SL Sound Level Meter
-26%
ENVIRONMENTAL METER, SOUND LEVEL METER, MINI ENVIRONMENTAL TESTERS, MetraviET-99SL Sound Level Meter
- Standards Applied : IEC61672-1 CLASS 2
- Frequency Range : 31.5Hz to 8kHz
- Measuring Level Range : 30 to 130dB
- Frequency Weighting : A
- Microphone :1/2 inch electret condenser microphone
- Display : LCD 3-1/2 digits
- Resolution : 0.1dB
- Display Up Data : 0.5 secs
- Time Weighting : FAST (125mS), SLOW (1000mS)
- Accuracy : ± 1.5 dB (at 1kHz, Standard-Audioquelle)
- Alarm Function
- Auto Power Off
SKU: n/a -
DIGITAL PANEL METER, FREQUENCY COUNTER, Metravi
FC-2700 Frequency Counter
- Bench Type
- 8 Digit RED LED Display
- Dual Channel Input
- Range: up to 2.7GHz
- Resolution: 100Hz
- Accuracy: ±1%
- Sensitivity: 20mV rms up to 8MHz / 30mV rms up to 10MHz / 20mV rms up to 80Hz/ 30mV rms up to 2.7GHz
- Auxiliary Power Supply: 220V AC 50Hz
SKU: n/a
