-26%
DISCHARGE RODS, Metravi
Single Phase FRP Telescopic Earth and Discharge Rod
Availability:
6 in stock
- Material : FRP Pultruded
- Process : Automatic Pultrusion Plant
- Surface : Smooth and Glossy
- Design : Telescopic
- Locking : Push Button type Locking System
- Total Sections : 03
- Assembled Length : 15 feet
- H.V.Test : 110 KV
- Glass Content : 65 %.
- Top Section Dia : 25 mm.
- Bottom Section Dia : 45 mm.
- Earthing : Die cast Aluminium Earthing instrument for 30mm Dia
4,300.00 ₹ 5,805.00 ₹
6 in stock
CompareRelated products
-
Calibrator, Metravi
VIB-CAL-01 Handheld Vibration Calibrator
- Frequency : 159.2Hz +0.5%
- Amplitude : Acceleration : 9.81 m/s2 RMS
- Velocity : 9.81mm/sec RMS
- Displacement : 9.81 micron RMS
- Accuracy : ± 5%
- Distortion : < 3%
- Maximum load : 120 grams
- Power : 9V Rechargeable Battery (Upto 1.5 hours operation)
- Charge time : 15 hours
- Sensor Mounting base : M5 tapped hole
- Operating Temperature : 0°C to 55°C
- Operating Humidity : 90% non–condensing
SKU: n/a -
Calibrator, Metravi
CAL-400-3 mV mA Calibrator
- Consists of a transmitter and a receiver
- Used to detect or trace conductors and to find short faults in them.
- Conductor tracing in the soil
- Detecting fuses and assigning current circuits
- Tracing sockets and distribution sockets having accidentally been covered by plastering
- Detecting interruptions and short-circuits in floor heating
- Tracing metallic water and heating piping
- Automatic and manual sensitivity adjustment
- Acoustic reception signal may be switched off
- Auto-Power-Off function
- Backlit LCD
SKU: n/a -
Calibrator, Metravi
CE-0102TMC Non-Contact Tachometer Calibrator
- Easy to use calibrator for instant and reliable calibration of Non -Contact tachometers up to 199999 RPM
- The desired RPM can easily be set using the front panel switches
- Since RPM is a function of the frequency,the bright White LED flashes at avalue nearest to the set RPM and the actual RPM/Frequency is displayed on the 2 Line Backlit alpha numeric LCD display
- The actual RPM/Frequency is displayed on the 2 Line Backlit alpha numeric LCD display
SKU: n/a -
Cable Fault Locator, Metravi
TDRL-912 Telecom Cable Fault Locator
- Digital Gain Adjustment Control: to make the gain adjustment very easy.
- Digital Waveform Automatic Identification technique: to make sure there is no test dead zone.
- Top-grade ARM single chip micro-computer: enables calculations and judge fault waveforms accurately.
- Display: Large colourful LCD, easy and simple to use.
- Power: High-energy Li-ion battery, provides continuous
- Working Capacity: for 10 hours (post full charge)
- Max range: 8 kms (16kms/32kms are optional)
- Highest resolution: 1m
- Dead Zone: 0m
- Power consumption: 1W
- Package includes: Fault Locator, 2 Test Lines, Charger, Carrying Bag, User Manual, CD with Software & U-Disk (only for USB function)
SKU: n/a
