-26%
METAL DETECTOR, Metravi
MD-300 Metal Detector
Availability:
6 in stock
- Simple operation, compact design, easy to store, low failure rate.
- Sensitivity is very easy to detect the size of a pin (or even less), metal items.
- Has the Low battery indication
- Very Cost Effective and stylish product
- Audio as well as Vibration Alert
- Battery Operated
- Light Weight
- Detection Distance: Pin – 35mm, Handgun – 120mm, US25 Cents 50mm.
1,950.00 ₹ 2,633.00 ₹
6 in stock
CompareRelated products
-
Cable Fault Locator, Metravi
CFL-01 Cable Fault Locator with Pipe and Cable Tracer
- Consists of a transmitter and a receiver
- Used to detect or trace conductors and to find short faults in them.
- Conductor tracing in the soil
- Detecting fuses and assigning current circuits
- Tracing sockets and distribution sockets having accidentally been covered by plastering
- Detecting interruptions and short-circuits in floor heating
- Tracing metallic water and heating piping
- Automatic and manual sensitivity adjustment
- Acoustic reception signal may be switched off
- Auto-Power-Off function
- Backlit LCD
SKU: n/a -
Battery Impedance Tester, Solar Tools, Metravi
TM-6002 Battery Impedance Tester
- Large Backlit LCD Display
- Data Logging up to 9999 sets
- Resistance Measurement: 10uΩ to 40Ω
- Voltage Measurement: 1mV to 40V
- Temperature Measurement: -20° to 60°C
- DC Current Measurement: 0.6A to 700A DC
- Measures internal impedance and open circuit voltage of the secondary batteries, including Nickel-metal Hydride (NiMH), Nickel-cadmium (NiCd), Lithium-ion (Li-ion), Alkaline and Lead-acid batteries.
- AC four-terminal method to measure the internal impedance by eliminating lead impedance and contact impedance to get accurate results.
SKU: n/a -
Clamp Meter, Metravi
DT-115 Digital TRMS AC Clamp Meter
- Accuracy: ± (2%+30)
- Resistance: 0-600/6K/60K/600K/6M/40M Ohms
- Accuracy: ± (0.8%+3)
- Capacitance: 60nF/600nF/6uF/60uF/600uF/6mF/30mF
- Accuracy: ± (3.5%+20)
- Frequency: 0-10/100/1K/10K/100K/1M/10MHz
- Accuracy: ± (0.1%+3)
- Temperature: -20°C to 1000°C
- Accuracy: ± (1.0%+5)
- Diode & Continuity test
SKU: n/a -
Calibrator, Metravi
709H mV mA Loop Calibrator with HART Communication
- Compact Loop Calibrator with HART communication
- Able to read basic device information and execute diagnostic tests
- High precision ±0.01%
- High resolution 0.001mA
- Automatic Ramp & Step
- High visibility 3.2″ TFT colour display with backlight
- Supports SCPI
- Auto Power Off and Low Battery display
- Max. permitted voltage: 30V (between any two terminals or between any terminal and earth ground)
- Operating temperature : 0°C ~ 50°C
- Operating relative humidity: ≤ 80%RH
- Protection level: IP65 (Dust, Water spray)
SKU: n/a
