-26%
EARTH/GROUND RESISTANCE TESTER, EARTH RESISTANCE TESTER, Metravi
ERT-1501 Digital Earth Resistance Tester with Kit
Availability:
6 in stock
- Data Hold facility
- Displays test result and battery voltage on the same screen
- LOCK Button for continuous HANDS FREE measurement
- Both Earth Resistance and Earth Resistivity can be measured
- Can be used in 4 Terminal and 3 Terminal configurations
- Display : 4 Digits EXTRA LARGE Backlit Dual LCD Display
- Earth Resistance Range : 0 – 10/100/1000 Ohms
- Accuracy : ±3% + 2d
- Low Resistance Range : 0 – 200 k.Ohms
7,900.00 ₹ 10,665.00 ₹
6 in stock
CompareRelated products
-
Calibrator, Metravi
CAL-400-3 mV mA Calibrator
- Consists of a transmitter and a receiver
- Used to detect or trace conductors and to find short faults in them.
- Conductor tracing in the soil
- Detecting fuses and assigning current circuits
- Tracing sockets and distribution sockets having accidentally been covered by plastering
- Detecting interruptions and short-circuits in floor heating
- Tracing metallic water and heating piping
- Automatic and manual sensitivity adjustment
- Acoustic reception signal may be switched off
- Auto-Power-Off function
- Backlit LCD
SKU: n/a -
Calibrator, Metravi
709H mV mA Loop Calibrator with HART Communication
- Compact Loop Calibrator with HART communication
- Able to read basic device information and execute diagnostic tests
- High precision ±0.01%
- High resolution 0.001mA
- Automatic Ramp & Step
- High visibility 3.2″ TFT colour display with backlight
- Supports SCPI
- Auto Power Off and Low Battery display
- Max. permitted voltage: 30V (between any two terminals or between any terminal and earth ground)
- Operating temperature : 0°C ~ 50°C
- Operating relative humidity: ≤ 80%RH
- Protection level: IP65 (Dust, Water spray)
SKU: n/a -
Calibrator, Metravi
PM-29 Process Meter
- Digital Process Calibrator cum Multimeter
- Display: Backlit LCD, 4 digit display for measurement, 5 digit display for output
- Confirms to IEC61010-1 (CATIV 600V, CATIII 1000V, Pollution Level II
- Overload Protection
- Surge Protection
- Developed, designed and produced according to ISO 9001
SKU: n/a -
Calibrator, Metravi
CAL-500 Universal Calibrator
- Hand Held, Battery Operated
- Extra Large LCD Display
- Displays both output and measurements
- In the output / measurement mode following are available:
- DC Voltage: 0 – 24mV / 100mV / 15V
- Accuracy: ±0.2%
- DC Current: 0 – 24mA
- Accuracy: ±0.2%
- Step wise output of 4/8/12/16/20/24mA
- Passive Current output: 0 – 24mA
- Accuracy: ±0.2%
- 24V Loop Power Output
SKU: n/a
