-29%
HANDHELD DEVICES, MULTIMETERS, Sonel
CMM-40 Multimeters
Availability:
10 in stock
- MAX and MIN function for saving extreme values
- AC+DC function for reading the sum of an alternating and direct component
- REL mode for relative measurement to a stored reference value
- PEAK Hold for displaying the peak value of the measured parameter.
15,220.00 ₹ 21,512.00 ₹
10 in stock
CompareRelated products
-
HANDHELD DEVICES, MULTIMETERS, Sonel
CMM-60 Multimeters
- The automatic holding of the measurement result while working with both hands is now possible thanks to the AutoHold function,
- Measurements of the current loop 4-20 mA in analogue circuits controlling temperature, pressure, humidity or flow sensors are possible thanks to the special function that displays the percentage results for the corresponding current values,
- The meter allows the measurement of very small currents in the range of 500 μA, useful during service works, e.g. in tests of real-time clock support systems or in the maintenance of flame sensors in combustion chambers,
- Thanks to the dedicated “CMM-60 Multimeter Software”, it is possible to transfer results from the meter’s memory to a computer program and analyse these results further,
- Visibility in all conditions and reading at a wide angle are possible thanks to the colour display with a resolution of 320 x 240 pixels and a diagonal of 3.5”,
- Operating the meter in thick gloves during industrial measurements will not be a problem thanks to the specially designed rotary switch
SKU: n/a -
Sonel, THERMAL IMAGERS AND PYROMETERS
KT-120M Thermal Imagers And Pyrometers
- Measuring range 20°C…50°C (68°F…122°F)
- Accuracy up to ±0.5°C (0.9°F)
- Fast temperature measurement
- Automatic signaling of fever detection
- Saving IR images to SD card
- Built-in Li-Ion battery with 8-hour working time
- Interfaces: USB type C, SD slot
- Can be set up on a tripod
SKU: n/a -
Power Quality Analysis, Sonel
PQM-707 Power Quality Analysis
- 7” touchscreen – ergonomic and intuitive graphical user interface.
- Over 10 years of recording.
- CAT IV 600 V measurement category – high safety.
- All parameters according to class S – high accuracy of measurements.
- Li-Ion rechargeable battery – higher mobility.
- Powering from measured network – reliability of measurements.
- Removable memory card – recording data with no restrictions.
- Quick setup and reporting – ease of use.
- Cooperation with desktop Sonel Analysis software – extended data analysis.
SKU: n/a -
ELECTRICAL SAFETY MEASUREMENTS, SHORT CIRCUIT LOOP MEASUREMENTS, Sonel
MZC-304F
- Fault loop impedance measurement with 0.01 Ω resolution.
- Low-current impedance measurement in circuits protected by RCD ≥ 30mA with 0.01 Ω resolution (range of 180…270 V)
- Operates in networks with voltages 220/380 V, 230 V/400 V, 240/415 V (operating range 180…460 V)
- Operating voltage range: 180…270 V (for ZL-PE and ZL-N) and 180…460 V (for ZL-L).
- Maximum measuring current: 7.6 A for 230 V (3×10 ms), 13.3 A for 400 V (3×10 ms).
- Operating frequency 45…65 Hz
- Calculation of Ik fault current.
- Measurement with swapped L and N conductors.
- Measurement of resistance (RS) and reactance (XS) components.
- Low-voltage measurement of continuity of circuit and resistance.
SKU: n/a
