-26%
ELECTRICAL TESTER, Metravi
AC-6 Socket Polarity and Earth Leakage Tester
Availability:
6 in stock
- Socket Polarity and Earth Leakage Tester
- Tests Three Wire 220V AC outlets and Earth Leakage Circuit Breakers
- Can be tested with test currents from 10mA, 20mA, 25mA, 30mA and 35mA
- Power Supply: From Unit Under Test
- Confirms to CAT III 600V
- Electrical Safety: IEC 61010/EN 61010; IEC 61557-7/EN 61557-7
- Indicates the following Status: No Earth, Line Neutral Reversal, No Neutral, Line Earth Reversal, No Line
- Test Current: 10mA,15mA,20mA,25mA,30mA,35mA
1,590.00 ₹ 2,147.00 ₹
6 in stock
CompareRelated products
-
Battery Impedance Tester, Solar Tools, Metravi
TM-6002 Battery Impedance Tester
- Large Backlit LCD Display
- Data Logging up to 9999 sets
- Resistance Measurement: 10uΩ to 40Ω
- Voltage Measurement: 1mV to 40V
- Temperature Measurement: -20° to 60°C
- DC Current Measurement: 0.6A to 700A DC
- Measures internal impedance and open circuit voltage of the secondary batteries, including Nickel-metal Hydride (NiMH), Nickel-cadmium (NiCd), Lithium-ion (Li-ion), Alkaline and Lead-acid batteries.
- AC four-terminal method to measure the internal impedance by eliminating lead impedance and contact impedance to get accurate results.
SKU: n/a -
Calibrator, Metravi
SC-05 Sound Level Calibrator
- Standard Sound Ringing Capabilities at 94dB and 114dB
- Can be used for both A Weighting and C Weighting Calibration
- Low Battery Indication
- Output frequency: 1kHz
- Accuracy: ±0.5dB
- Output Frequency 1000Hz, ±4%
- Reference Temperature Conditions >23ºC (73ºF)
- Atmospheric pressure >1013 mbar (760mm of Hg)
- Relative humidity >65%RH
- Accuracy of Sound Pressure Level Under stated reference environment conditions ±0.5dB
- Complete with user manual and battery
SKU: n/a -
Clamp Meter, Metravi
DT-115 Digital TRMS AC Clamp Meter
- Accuracy: ± (2%+30)
- Resistance: 0-600/6K/60K/600K/6M/40M Ohms
- Accuracy: ± (0.8%+3)
- Capacitance: 60nF/600nF/6uF/60uF/600uF/6mF/30mF
- Accuracy: ± (3.5%+20)
- Frequency: 0-10/100/1K/10K/100K/1M/10MHz
- Accuracy: ± (0.1%+3)
- Temperature: -20°C to 1000°C
- Accuracy: ± (1.0%+5)
- Diode & Continuity test
SKU: n/a -
Clamp Meter, Metravi
DT-1150 Digital AC Clamp Meter
- Diode and Continuity test
- Jaw Opening : Approx. 40mm
- Overload Protection
- CE CAT III 600V
- Dimension : 250(L) × 97(W) × 48(H) mm
- Weight : 345gm approx.(including battery)
- Power Supply : 3V (2pcs AAA Batteries)
- Working Environment : 0~40°C, 45% ~ 75% RH Non Condensing (When temperature is less than 10°C)
- Storage Environment : -10°C~50°C, RH is less than 80%
- Accessories : User Manual, Test Leads, 2pcs battery, Soft carry case
SKU: n/a
