-26%
Metravi, OSCILLOSCOPE, DIGITAL STORAGE OSCILLOSCOPE DUAL CHANNEL
DSO-6050 Digital Storage Oscilloscope
Availability:
6 in stock
- Bandwidth: 50MHz
- Channel: Dual (2)
- Sample Rate: 1G/s
- Sample Rate/Relay Time Accuracy: ±100ppm
- Display: 7″ colour LCD, 800 x 480 pixels
- Probe Attenuation Factor: 1X, 10X, 100X, 1000X
- DC Accuracy: Average≥16：±(3% reading + 0.05 div) for △V
- DC Gain Accuracy: ±3%
- Max Input Voltage: 400V (PK – PK) (DC+AC, PK – PK)
- Channel Isolation: 50Hz : 100 : 1, 10MHz : 40 : 1
- Input Impedance: 1MΩ ± 2%, in parallel with 20pF±5pF
- Communication Interface: USB host, USB device
- Frequency Counter
40,000.00 ₹ 54,000.00 ₹
6 in stock
CompareRelated products
-
Cable Fault Locator, Metravi
TDRL-912 Telecom Cable Fault Locator
- Digital Gain Adjustment Control: to make the gain adjustment very easy.
- Digital Waveform Automatic Identification technique: to make sure there is no test dead zone.
- Top-grade ARM single chip micro-computer: enables calculations and judge fault waveforms accurately.
- Display: Large colourful LCD, easy and simple to use.
- Power: High-energy Li-ion battery, provides continuous
- Working Capacity: for 10 hours (post full charge)
- Max range: 8 kms (16kms/32kms are optional)
- Highest resolution: 1m
- Dead Zone: 0m
- Power consumption: 1W
- Package includes: Fault Locator, 2 Test Lines, Charger, Carrying Bag, User Manual, CD with Software & U-Disk (only for USB function)
SKU: n/a -
Calibrator, Metravi
11+ Universal Source Calibrator
- Provides 25% step or 100% step DC Current output current manually or Automatically.
- TC Source terminals and built in lead connector of same temperature, The unit can be converted between °C & °F
- Auto Power Off
- Display : 6 Digits white backlight LED on the LCD
- Technical Specifications
- DC voltage : 0 – 100mV/1V/10V
- Resolution : 1µV/10µV/0.1mV
- Accuracy : ±0.02%
- DC Current : 0 – 20mA
- Resolution : 1µA
- Accuracy : ±0.02%
SKU: n/a -
Clamp Meter, Metravi
DT-369 TRMS AC Clamp Meter
- Display: 6000 Counts LCD
- T-RMS
- Auto Power Off
- Flame Sensor Current measurement
- Relative Measurement
- Clamp Jaw Dia: 30mm
- Display : LCD display.
- MAX. Display : 5999 digits (3 5/6) auto polarity display.
- Measuring method : ADC+MCU.
- Sampling rate : 3times/second.
- Overload display : “OL” displayed
SKU: n/a -
Battery Impedance Tester, Solar Tools, Metravi
TM-6002 Battery Impedance Tester
- Large Backlit LCD Display
- Data Logging up to 9999 sets
- Resistance Measurement: 10uΩ to 40Ω
- Voltage Measurement: 1mV to 40V
- Temperature Measurement: -20° to 60°C
- DC Current Measurement: 0.6A to 700A DC
- Measures internal impedance and open circuit voltage of the secondary batteries, including Nickel-metal Hydride (NiMH), Nickel-cadmium (NiCd), Lithium-ion (Li-ion), Alkaline and Lead-acid batteries.
- AC four-terminal method to measure the internal impedance by eliminating lead impedance and contact impedance to get accurate results.
SKU: n/a
