Shop
Showing 169–192 of 306 results
-
Sonel, THERMAL IMAGERS AND PYROMETERS
KT-128 Thermal Imagers And Pyrometers
- Measuring range -20°C…400°C (-20°F… 752°F)
- Quick start
- Fast temperature measurement
- Automatic signalling of exceeded alarm threshold
- Saving IR images to SD card
- Built-in Li-Ion battery with a 5-hour working time
- Interfaces: USB type C, SD slot
- Can be set up on a tripod
SKU: n/a -
LOCATION OF CORDS AND CABLES, FAULT DETECTION, Sonel
LKO-720
- Receiver operation with max. 4 transmitters at the same time to locate interruptions or distinguish wires.
- Receiving status information from the LKN-720 transmitter.
- The function 3D – detecting the direction of current.
- An LED torch.
- Headphone socket.
- Software upgrade via USB.
- Screen backlight for work in the dark.
SKU: n/a -
LOCATION OF CORDS AND CABLES, FAULT DETECTION, Sonel
LKO-720
- Receiver operation with max. 4 transmitters at the same time to locate interruptions or distinguish wires.
- Receiving status information from the LKN-720 transmitter.
- The function 3D – detecting the direction of current.
- An LED torch.
- Headphone socket.
- Software upgrade via USB.
- Screen backlight for work in the dark.
SKU: n/a -
Data Loggers, Novus
LogBox Wi-Fi Data logger
- Monitoring of distributed and large facilities with existing Wi-Fi infrastructure
- Configuration and data downloading via USB or Wi-Fi
- Alarm notification by email
- Wi-Fi data communication using NXperience, cloud systems, SCADA or NOVUS Cloud
- Modbus TCP and MQTT protocols
SKU: n/a -
Novus, Sensors & Transmitters, Temperature Transmitters
Loop-powered Current Isolators Txisoloop-1 & Txisoloop-2
Novus, Sensors & Transmitters, Temperature TransmittersLoop-powered Current Isolators Txisoloop-1 & Txisoloop-2
- High Isolation Protection – Eliminates ground loops and electrical noise.
- Loop-Powered Operation – No external power supply required.
- Compact & Easy Installation – DIN-rail mountable design.
- Low Power Consumption – Minimal impact on loop power.
- Two Model Variants:
- TxIsoLoop-1 – Single-channel isolation.
- TxIsoLoop-2 – Dual-channel isolation.
- Enhanced Signal Integrity – Accurate 4-20mA transmission.
- Robust Industrial Design – High EMC immunity.
- Wide Compatibility – Works with PLCs, SCADA, and automation systems.
SKU: n/a -
Calibrator, Metravi
M-01S mV Thermocouple and RTD Source Calibrator
- DC Voltage: -10.000mV~110.00mV-0.1000V~1.1000V
- Accuracy: 0.05%+0.03mV / 0.05%+0.3mV
- Resolution: 0.01mV / 0.0001V
- Resistance: 0~400.0Ω / 0~4.000KΩ
- Accuracy: 0.05%+0.2Ω / 0.05%+2Ω
- Resolution: 0.1Ω / 1Ω
- Electrical safety : EN61010-1:2001, CE, TUV ISO-9001 Electromagnetic compatibility (EMC) : EN61326-1:2006
- Protection : IP40, 1m drop-tested
- Vibration and fall : IEC 60068-2-64:2008, IEC 60068-2-32:2008
- Display : 5 digits, segment code LCD with white backlight
- Power Supply : 3 x AA alkaline batteries
- Accessories : 1 pair Industrial test leads, User Manual, 3 units AA alkaline Battery, Thermocouple Adapter
SKU: n/a -
Calibrator, Metravi
M-05S mV mA Loop Calibrator
- Power Supply: Internal 24V circuit power supply
- Maintenance setup functions
- Auto power-off
- Backlight
- LED Flashlight
- Segment code is displayed on the LCD with a white backlight.
- Power: 3 AA battery cells
- Low-battery detection
- Small, firm, reliable, suitable for field use
- Electrical safety: EN61010-1:2001
- Withstand voltage: AC3540V(50/60Hz)/5 seconds between terminal and housing.
- Insulation impedance: DC1000V/100MΩ or more between terminal and housing.
SKU: n/a -
Metravi, MOTOR CHECKER, ANALOGUE MOTOR CHECKER
MC-22 Analogue Motor Checker
- Provides a fast and easy means to detect electrical faults- short circuits, open circuits, damaged insulation etc. – in motors and other three phase machine
- Used on stationary motors
- It measures insulation resistance in the range of; 0 – 20 M ohms at 500 V DC, 0.25 mA Max.
- Resistance measuring range: 0 – 60 ohms. ( 0 – 0.2 ohms in Range 6 )
- Inductance measuring range: 0 – 300 mH ( 0 – 1 mH in Range 6 )
- Battery Test: Condition of batteries indicated on meter
- Battery operated
SKU: n/a -
Metravi, MOTOR CHECKER, DIGITAL MOTOR CHECKER
MC-22D Digital Motor Checker
- Micro Controller based diagnostic tool for Electrical Engineers
- Indentifies Open and Short Circuits / Loose Connections In a winding coil
- Detect Rotor Bar problems without dismounting the motor
- Display: LCD
- Insulation Resistance: 0 – 20M.Ohms at 500V DC
- Resistance Test: 0 – 200 / 20 / 6 / 2 / 600m / 200m.Ohms
- Inductance Test: 0 – 1000m / 300m / 100m / 30m / 10m / 3mH
- Low Battery indication
SKU: n/a -
METAL DETECTOR, Metravi
MD-300 Metal Detector
- Simple operation, compact design, easy to store, low failure rate.
- Sensitivity is very easy to detect the size of a pin (or even less), metal items.
- Has the Low battery indication
- Very Cost Effective and stylish product
- Audio as well as Vibration Alert
- Battery Operated
- Light Weight
- Detection Distance: Pin – 35mm, Handgun – 120mm, US25 Cents 50mm.
SKU: n/a -
Clamp Meter, Metravi
Metravi PRO FCM-900A Flexible AC High Current Clamp Meter
- Measures and displays AC Current and Voltage readings SIMULTANEOUSLY
- Small size and light weight
- Coil diameter Φ300mm
- Very simple to operate
- Backlight function
- Data Hold function
- High measurement accuracy
- Communication Interface: USB
- Data Logging: 600 Sets
- Stored data can be uploaded to the computer
- Historical data reading, Query, Save, Print and other functions
SKU: n/a -
ELECTRICAL TESTER, PHASE SEQUENCE INDICATOR, Metravi
Metravi PSI-HV Wireless High Voltage Phase Sequence Indicator
ELECTRICAL TESTER, PHASE SEQUENCE INDICATOR, MetraviMetravi PSI-HV Wireless High Voltage Phase Sequence Indicator
- Phase Detection Voltage Range: AC 10V～500kV
- Phase Detection Distance: 200 mts
- Phase Sequence Qualitative: Postive phase:X->Y->Z->X(Phase different: 100°～140°); Reversed phase: X->Z->Y->X(Phase different: 100°～140°)
- Phase Detection Qualitative: In phase:－20°~20°; Out phase: 100°~140°and 220°~260°
- Phase Range: 0°~360°；Accuracy ≤± 10°；Resolution : 1°
- Frequency Range: 45.0Hz~65.0Hz；Accuracy: ≤±2Hz; Resolution: 0.1Hz
- Transmitting Frequency: 433MHz
- Voltage display
- Auto Shutdown
- Display: 3.5 inch large, colourful screen
SKU: n/a -
Insulation resistance meters, Sonel
MIC-10 Insulation Resistance Meters
- Measurement of insulation resistance up to 100 GΩ thanks to max 1000 V measurement voltage
- Designed for harsh environmental conditions conditions – IP67 ingress protection
- Excellent for repeatable measurements – memory of 12,000 records and UNI-Schuko adapter for sockets
- Allows for testing electrical continuity – RCONT 200 mA function
- Checking start capacitors in motors thanks to capacity measurement function
SKU: n/a -
Insulation resistance meters, Sonel
MIC-10K1 Insulation Resistance Meters
- Continuous indication of measured insulation resistance or leakage current
- Automatic discharge of measured object capacitance-voltage after the end of insulation resistance measurement
- Acoustic signaling of 5-second intervals to facilitate capturing time characteristics
- Adjustable measuring time – up to 99’59’’
- T1, T2, and T3 test times for measuring one or two absorption coefficients from the range of 1…600 s
- Polarization index (PI), absorption coefficients Ab1, Ab2 and dielectric absorption ratio (DAR) measurement
- Indication of actual test voltage during measurement
- 1.2 mA, 3 mA, or 6 mA test current
- Insulation resistance measurement using two- or three-wire method
- Measurements with test leads up to 20 m
- Protection against measuring live objects
SKU: n/a -
Insulation resistance meters, Sonel
MIC-2501 Insulation Resistance Meters
- Measurement voltage within the range of 100…2500 V, selected in steps of 100 V
- Continuous reading of measured insulation resistance or leakage current
- Automatic discharge of the measured object’s capacitance upon completion of insulation resistance measurement,
- Sound signalling of five-second time intervals, facilitating capture of time characteristics
- Timed measurement times T1 , T2 and T3 for measurement of absorption coefficients (Ab/PI/DAR) at 15, 60 and 600 s and polarization index
- Reading of actual measurement voltage during measurement
- Protection against measurement of live objects
SKU: n/a -
Insulation resistance meters, Sonel
MIC-30 Insulation Resistance Meters
- Measurement of insulation resistance up to 100 GΩ thanks to max 1000 V measurement voltage
- Designed for harsh environmental conditions conditions – IP67 ingress protection
- Excellent for repeatable measurements – memory of 12,000 records and UNI-Schuko adapter for sockets
- Allows for testing electrical continuity – RCONT 200 mA function
- Checking start capacitors in motors thanks to capacity measurement function
SKU: n/a -
Insulation resistance meters, Sonel
MIC-5001 Insulation Resistance Meters
- Continuous reading of measured insulation resistance or leakage current
- Automatic discharge of the measured object’s capacitance upon completion of insulation resistance measurement
- Sound signalling of fi ve-second time intervals, facilitating capture of time characteristics
- Timing of measurement time T1, T2 and T3 for measurement of dielectric absorption ratio (DAR) and polarization index (PI)
- Reading of actual measurement voltage during measurement
- Protection against measurement of live objects
- Two- or three-lead method of insulation resistance measurement
- Power supplied by accumulator
- Instruments meet the requirements laid down by standard EN 61557
- The meter can be powered and charged from an external power adapter or from a car lighter socke
SKU: n/a -
Portable Instrument, Temperature measurement, Temperature Thermometers, TESTO, Testo Measuring Instruments
Mini surface thermometer – Mini surface thermometer
Portable Instrument, Temperature measurement, Temperature Thermometers, TESTO, Testo Measuring InstrumentsMini surface thermometer – Mini surface thermometer
- Perfect for checking surface temperatures
- Extra wide measuring tip for placing on a flat measuring point
- Measurement of high temperatures up to +300 °C
- Many areas of application: heating engineering, sanitation sector, and air conditioning/ventilation/refrigeration technology
SKU: n/a -
Metravi, MOISTURE METER, PINLESS MOISTURE METER
MM-10 Digital Pinless Moisture Meter
- Pinless Moisture meter is an electronic dampness indicator with a measuring process working on the principle of high frequency measurement.
- Used for non-destructive tracing dampess in building materials of all kinds as well as for detecting damp distribution in walls, ceiling and floors.
- Suitable for pre-testing the readiness of building materials for covering prior to CM Measurment
- Quickly indicates the moisture content of materials
- Depth of penetration about 20 – 40mm
- Low battery Indication, Auto Power Off
- Max / Min Record Function.
- Data Hold
- White Backlit LCD Display
- Measuring Range: 0 to 100%
SKU: n/a -
Metravi, MILLION MEGOHMS METER, ANALOGUE MILLION MEGOHMS METER
MMM-1 Analogue Million MegOhms Meter
- Ideal for measuring high resistance and insulation
- Output Test Voltage: 100V / 200V / 300V / 400V / 500V
- It has a measuring range of 1 MOhm to 10 Million M.Ohms
- Insulation Resistance Range available in 6 ranges.
- Accuracy: ±5%
- Overload Protection
- Visual warning for HT link
- Analogue Display
- Auxiliary Power Supply 220V AC
SKU: n/a -
Multifunction electrical installations meters, Sonel
MPI-530 Multifunction Electrical Installations Meter
Multifunction electrical installations meters, SonelMPI-530 Multifunction Electrical Installations Meter
- Short circuit loop impedance (also in circuits secured with RCDs)
- RCD parameters
- Insulation resistance
- Earth resistance (4 measurement methods + soil resistivity measurement)
- Continuity of protective and equipotential bondings
- Light intensity measurement
- Phase sequence test
- Motor rotation direction test.
SKU: n/a -
RCD Meter, Sonel
MRP-201
- Testing of general, short delay and selective RCDs for the rated current values 10, 15, 30, 100, 300, 500 mA
- Measurement of IA trip current and tripping time tA for currents 0.5 IΔn, 1 IΔn, 2 IΔn, 5 IΔn
- RE and UB measurement without RCD tripping
- Extended AUTO function of RCD measurement
- Measurement of IA and tA during one RCD tripping
- Checking the correctness of PE connection using a contact electrode
- Measurement of voltage (0 … 500 V) and network frequency
- Memory of 990 results
- Wireless data transmission to a computer
SKU: n/a -
Earth resistance and resistivity meters, Sonel
MRU-21 Earth Resistance And Resistivity Meters
- Measurement of resistance of auxiliary electrodes RS and RH
- Measurement of interference voltage
- Selection of maximum measuring voltage (25 V and 50 V)
- Auto-zero function for the resistance of measurement leads (RCONT zero)
SKU: n/a
