-26%
ENVIRONMENTAL METER, WET BULB GLOBE, Metravi
WBGT-188 Wet Bulb Globe
Availability:
6 in stock
- Quick-response capacitance sensor, accurate measurement for wet bulb
- Globe temperature (WBGT), Black Globe temperature (TG), Humidity (%RH), Air Temperature (TA), Wet Bulb (WET), and Dew Point (DEW)
- Max/Min and data hold
- Low battery indication
- LCD display with LED backlight
- Recall recorded data
- Switch the temperature unit to °C or °F
- Brass black ball in 50mm diameter
- WBGT alarm setting
- Auto power off with disable function
- Data logging capacity: 12000 records, USB PC serial interface (WBGT-188D)
- Sampling interval: Max 24 hours; Min 1 Second (WBGT-188D)
18,500.00 ₹ 24,975.00 ₹
6 in stock
CompareRelated products
-
Calibrator, Metravi
CAL-600 Universal Calibrator
- Hand Held, Battery Operated
- Extra Large LCD Display
- Displays both output and measurements
- In the output / measurement mode following are available:
- DC Voltage: 0 – 24mV / 100mV / 15V
- Accuracy: ±0.2%
- DC Current: 0 – 24mA
- Accuracy: ±0.2%
- Step wise output of 4/8/12/16/20/24mA
- Passive Current output: 0 – 24mA
- Accuracy: ±0.2%
- 24V Loop Power Output
- Resistance Source: 15Ω ~ 400Ω
- Resistance Measurement: 0Ω ~ 400Ω
- Accuracy: ±0.2%
SKU: n/a -
Calibrator, Metravi
BB-500 Infrared Thermometer Black Body Calibrator
- Black Body is used to calibrate infrared thermometers
- Easily certify infrared thermometers up to 500°C (932°F)
- RTD Reference Well for high precision
- Small compact design
- Temperature Range : 50°C ~ 500°C (122°F ~ 932°F)
- Heating Time : 30 minutes to max
- Cooling Time : 30 minutes to 100 °C (122°F)
- Aperture Diameter : 58mm
- Power : 220VAC(±10%), 1.25A / 110VAC(±10%),2.5A
- Complete with carrying case and instruction manual
SKU: n/a -
Calibrator, Metravi
VIB-CAL-01 Handheld Vibration Calibrator
- Frequency : 159.2Hz +0.5%
- Amplitude : Acceleration : 9.81 m/s2 RMS
- Velocity : 9.81mm/sec RMS
- Displacement : 9.81 micron RMS
- Accuracy : ± 5%
- Distortion : < 3%
- Maximum load : 120 grams
- Power : 9V Rechargeable Battery (Upto 1.5 hours operation)
- Charge time : 15 hours
- Sensor Mounting base : M5 tapped hole
- Operating Temperature : 0°C to 55°C
- Operating Humidity : 90% non–condensing
SKU: n/a -
Calibrator, Metravi
709H mV mA Loop Calibrator with HART Communication
- Compact Loop Calibrator with HART communication
- Able to read basic device information and execute diagnostic tests
- High precision ±0.01%
- High resolution 0.001mA
- Automatic Ramp & Step
- High visibility 3.2″ TFT colour display with backlight
- Supports SCPI
- Auto Power Off and Low Battery display
- Max. permitted voltage: 30V (between any two terminals or between any terminal and earth ground)
- Operating temperature : 0°C ~ 50°C
- Operating relative humidity: ≤ 80%RH
- Protection level: IP65 (Dust, Water spray)
SKU: n/a
