-26%
Clamp Meter, Metravi
PRO 419 Digital TRMS AC/DC Clamp Meter
Availability:
6 in stock
- Professional T-RMS AC/DC Clamp Meter
- 4000 Counts, 3-3/4 Digits Backlit LCD Display
- Confirms to CAT-IV 600V, CAT-III 1000V, CE, IEC-61010-1
- 600V AC/DC Protection in all ranges
- 34 mm Clamp Jaw Dia
- Auto Power Off
- Non Contact Voltage Detector
- Flash light in the Jaw to access dark Areas
- Double Injection Housing, providing double insulation
- Data Hold, MAX-MIN Record, Relative Measurement
7,205.00 ₹ 9,727.00 ₹
6 in stock
CompareRelated products
-
Cable Fault Locator, Metravi
CFL-02 Digital Cable Fault Locator
- Pin Points Fault in all underground cables.
- Useful for Power, Control & Telecom Cables
- Maximum Cable Length 5kms
- Accuracy ±5%
- Faults located can be Medium/High Resistance Faults, Open Circuit and Short Circuit faults
- Two Techniques used
- Potential Comparison Technique
- Capacitance Comparison Technique
SKU: n/a -
Cable Fault Locator, Metravi
TDRL-912 Telecom Cable Fault Locator
- Digital Gain Adjustment Control: to make the gain adjustment very easy.
- Digital Waveform Automatic Identification technique: to make sure there is no test dead zone.
- Top-grade ARM single chip micro-computer: enables calculations and judge fault waveforms accurately.
- Display: Large colourful LCD, easy and simple to use.
- Power: High-energy Li-ion battery, provides continuous
- Working Capacity: for 10 hours (post full charge)
- Max range: 8 kms (16kms/32kms are optional)
- Highest resolution: 1m
- Dead Zone: 0m
- Power consumption: 1W
- Package includes: Fault Locator, 2 Test Lines, Charger, Carrying Bag, User Manual, CD with Software & U-Disk (only for USB function)
SKU: n/a -
Calibrator, Metravi
CAL-ER Earth and Ground Tester Calibrator
- Connection: 4-wire method
- Insulation Resistance: 10MΩ above(between the circuit and shell 500V)
- Safety Standards: IEC61010-1，CAT Ⅲ 600V，Polluted Gradation
- Package includes: Meter, Test Leads (2 Black, 2 Red), Carry Bag, User Manual, Test Certificate
SKU: n/a -
Calibrator, Metravi
M-05S mV mA Loop Calibrator
- Power Supply: Internal 24V circuit power supply
- Maintenance setup functions
- Auto power-off
- Backlight
- LED Flashlight
- Segment code is displayed on the LCD with a white backlight.
- Power: 3 AA battery cells
- Low-battery detection
- Small, firm, reliable, suitable for field use
- Electrical safety: EN61010-1:2001
- Withstand voltage: AC3540V(50/60Hz)/5 seconds between terminal and housing.
- Insulation impedance: DC1000V/100MΩ or more between terminal and housing.
SKU: n/a
