-26%
Clamp Meter, Metravi
771+ Digital Milliamp Process Clamp Meter
Availability:
6 in stock
- Hand-Held, Milli Amp Process Clamp Meter
- 4-20 mA DC measurement without breaking the electrical circuit
- With removable jaw connected to the body using an extension cable
- Battery Operated
- High Precision
- Built-in flashlight to access dark areas with ease
- Jaw Dia: 4.5mm
- Current Ranges 0mA ~ ±20.99mA / ±21.0mA… ±99.9mA
- Resolution: 0mA~ ±20.99mA: 0.01mA , ±21.0mA~ ±99.9mA: 0.1mA
- Accuracy : 0mA~ ±20.99mA: 0.3% reading ±8 digits , ±21.0mA~ ±99.9mA: 1% reading ±8 digits
- Percentage Span display feature for 4 to 20 mA Loops
- Data Hold
22,575.00 ₹ 30,476.00 ₹
6 in stock
CompareRelated products
-
Calibrator, Metravi
SC-05 Sound Level Calibrator
- Standard Sound Ringing Capabilities at 94dB and 114dB
- Can be used for both A Weighting and C Weighting Calibration
- Low Battery Indication
- Output frequency: 1kHz
- Accuracy: ±0.5dB
- Output Frequency 1000Hz, ±4%
- Reference Temperature Conditions >23ºC (73ºF)
- Atmospheric pressure >1013 mbar (760mm of Hg)
- Relative humidity >65%RH
- Accuracy of Sound Pressure Level Under stated reference environment conditions ±0.5dB
- Complete with user manual and battery
SKU: n/a -
Calibrator, Metravi
CAL-ER Earth and Ground Tester Calibrator
- Connection: 4-wire method
- Insulation Resistance: 10MΩ above(between the circuit and shell 500V)
- Safety Standards: IEC61010-1，CAT Ⅲ 600V，Polluted Gradation
- Package includes: Meter, Test Leads (2 Black, 2 Red), Carry Bag, User Manual, Test Certificate
SKU: n/a -
Clamp Meter, Metravi
DT-115 Digital TRMS AC Clamp Meter
- Accuracy: ± (2%+30)
- Resistance: 0-600/6K/60K/600K/6M/40M Ohms
- Accuracy: ± (0.8%+3)
- Capacitance: 60nF/600nF/6uF/60uF/600uF/6mF/30mF
- Accuracy: ± (3.5%+20)
- Frequency: 0-10/100/1K/10K/100K/1M/10MHz
- Accuracy: ± (0.1%+3)
- Temperature: -20°C to 1000°C
- Accuracy: ± (1.0%+5)
- Diode & Continuity test
SKU: n/a -
Cable Fault Locator, Metravi
CFL-02 Digital Cable Fault Locator
- Pin Points Fault in all underground cables.
- Useful for Power, Control & Telecom Cables
- Maximum Cable Length 5kms
- Accuracy ±5%
- Faults located can be Medium/High Resistance Faults, Open Circuit and Short Circuit faults
- Two Techniques used
- Potential Comparison Technique
- Capacitance Comparison Technique
SKU: n/a
