-26%
Metravi, MULTIMETER, BENCH-TYPE MULTIMETER
45-TRMS Bench Type Multimeter
Availability:
6 in stock
- Power supply: 220V/ 110V AC
- Manual range
- 41/2-digit large LCD display with back light(displaying range: 75 x 40 mm), max.reading: 19999
- Voltage measurement up to 1000VDC and 750V AC
- DC,AC current up to 20A
- ACV frequency response: 50kHz
- Frequency, Resistance, Capacitance measurement, Triode, Diode check and Continuity Test
- Overload protection: 250V rms
- Operation environment: 0°C-40°C,<75%R.H
- Dimension: 260mm x 220mm x 82mm
- Weight: approx. 1 kg
10,530.00 ₹ 14,216.00 ₹
6 in stock
CompareRelated products
-
Cable Fault Locator, Metravi
TDRL-912 Telecom Cable Fault Locator
- Digital Gain Adjustment Control: to make the gain adjustment very easy.
- Digital Waveform Automatic Identification technique: to make sure there is no test dead zone.
- Top-grade ARM single chip micro-computer: enables calculations and judge fault waveforms accurately.
- Display: Large colourful LCD, easy and simple to use.
- Power: High-energy Li-ion battery, provides continuous
- Working Capacity: for 10 hours (post full charge)
- Max range: 8 kms (16kms/32kms are optional)
- Highest resolution: 1m
- Dead Zone: 0m
- Power consumption: 1W
- Package includes: Fault Locator, 2 Test Lines, Charger, Carrying Bag, User Manual, CD with Software & U-Disk (only for USB function)
SKU: n/a -
Clamp Meter, Metravi
DT-369 TRMS AC Clamp Meter
- Display: 6000 Counts LCD
- T-RMS
- Auto Power Off
- Flame Sensor Current measurement
- Relative Measurement
- Clamp Jaw Dia: 30mm
- Display : LCD display.
- MAX. Display : 5999 digits (3 5/6) auto polarity display.
- Measuring method : ADC+MCU.
- Sampling rate : 3times/second.
- Overload display : “OL” displayed
SKU: n/a -
Calibrator, Metravi
CE-0102TMC Non-Contact Tachometer Calibrator
- Easy to use calibrator for instant and reliable calibration of Non -Contact tachometers up to 199999 RPM
- The desired RPM can easily be set using the front panel switches
- Since RPM is a function of the frequency,the bright White LED flashes at avalue nearest to the set RPM and the actual RPM/Frequency is displayed on the 2 Line Backlit alpha numeric LCD display
- The actual RPM/Frequency is displayed on the 2 Line Backlit alpha numeric LCD display
SKU: n/a -
Calibrator, Metravi
CAL-500 Universal Calibrator
- Hand Held, Battery Operated
- Extra Large LCD Display
- Displays both output and measurements
- In the output / measurement mode following are available:
- DC Voltage: 0 – 24mV / 100mV / 15V
- Accuracy: ±0.2%
- DC Current: 0 – 24mA
- Accuracy: ±0.2%
- Step wise output of 4/8/12/16/20/24mA
- Passive Current output: 0 – 24mA
- Accuracy: ±0.2%
- 24V Loop Power Output
SKU: n/a
