-26%
Clamp Meter, Metravi
307N Digital Clamp On Power Meter
Availability:
6 in stock
- Measures Power and Energy for single phase and three phase loads
- Auto-ranging
- Data Logging up to 99 Data
- Sleep Mode
- Clamp Jaw Dia: 56mm
- Confirms to CAT III 600V, IEC 61010, CAT IV 300V
- Non Contact Voltage Detector
- Data Hold, Max / Min record
- USB PC Interface
- Display; 4 digits Triple Backlit LCD Display with analogue bargraph
10,150.00 ₹ 13,703.00 ₹
6 in stock
CompareRelated products
-
Acidity Testing Kit, Metravi
ATK Acidity Testing Kit
- Used to measure Acidity content of Transformer Oil
- Portable equipment with test tubes to conduct the tests
- A set of chemical reactions need to be conducted to evaluate acidity of transformer oil
- Test Set consists of Ethyl Alcohol, Sodium Carbonate Solution, Universal Indicator, Test Tubes, Graduated Dropper
- Color chart calibrated with neutralization number values and instruction manual is also provided.
SKU: n/a -
Calibrator, Metravi
VIB-CAL-01 Handheld Vibration Calibrator
- Frequency : 159.2Hz +0.5%
- Amplitude : Acceleration : 9.81 m/s2 RMS
- Velocity : 9.81mm/sec RMS
- Displacement : 9.81 micron RMS
- Accuracy : ± 5%
- Distortion : < 3%
- Maximum load : 120 grams
- Power : 9V Rechargeable Battery (Upto 1.5 hours operation)
- Charge time : 15 hours
- Sensor Mounting base : M5 tapped hole
- Operating Temperature : 0°C to 55°C
- Operating Humidity : 90% non–condensing
SKU: n/a -
Cable Fault Locator, Metravi
CFL-02 Digital Cable Fault Locator
- Pin Points Fault in all underground cables.
- Useful for Power, Control & Telecom Cables
- Maximum Cable Length 5kms
- Accuracy ±5%
- Faults located can be Medium/High Resistance Faults, Open Circuit and Short Circuit faults
- Two Techniques used
- Potential Comparison Technique
- Capacitance Comparison Technique
SKU: n/a -
Battery Impedance Tester, Solar Tools, Metravi
TM-6002 Battery Impedance Tester
- Large Backlit LCD Display
- Data Logging up to 9999 sets
- Resistance Measurement: 10uΩ to 40Ω
- Voltage Measurement: 1mV to 40V
- Temperature Measurement: -20° to 60°C
- DC Current Measurement: 0.6A to 700A DC
- Measures internal impedance and open circuit voltage of the secondary batteries, including Nickel-metal Hydride (NiMH), Nickel-cadmium (NiCd), Lithium-ion (Li-ion), Alkaline and Lead-acid batteries.
- AC four-terminal method to measure the internal impedance by eliminating lead impedance and contact impedance to get accurate results.
SKU: n/a
