-26%
ELCB TESTER, Metravi
1810D ELCB Tester
Availability:
6 in stock
- 2000mS readout for testing latest delay action breakers
- Fully programmed operation
- Accurate digital read out of tripping time
- Two LED lamps give quick check for correct wiring
- Operates from mains supply. No need for batteries
- Compact, lightweight and simple to operate
- Zero cross circuitry permits testing at 0°and 180°portion of sine wave. At these two tests minimum (best) and maximum (worst) trip times will be displayed
- Trip Current Setting: 5mA, 10mA, 30mA, 100mA, 300mA, 500mA
- Operating Voltage: 220 / 230 / 240V AC, 50/60Hz
6,800.00 ₹ 9,180.00 ₹
6 in stock
CompareRelated products
-
Calibrator, Metravi
PM-29 Process Meter
- Digital Process Calibrator cum Multimeter
- Display: Backlit LCD, 4 digit display for measurement, 5 digit display for output
- Confirms to IEC61010-1 (CATIV 600V, CATIII 1000V, Pollution Level II
- Overload Protection
- Surge Protection
- Developed, designed and produced according to ISO 9001
SKU: n/a -
Cable Fault Locator, Metravi
CFL-02 Digital Cable Fault Locator
- Pin Points Fault in all underground cables.
- Useful for Power, Control & Telecom Cables
- Maximum Cable Length 5kms
- Accuracy ±5%
- Faults located can be Medium/High Resistance Faults, Open Circuit and Short Circuit faults
- Two Techniques used
- Potential Comparison Technique
- Capacitance Comparison Technique
SKU: n/a -
Clamp Meter, Metravi
DT-1150 Digital AC Clamp Meter
- Diode and Continuity test
- Jaw Opening : Approx. 40mm
- Overload Protection
- CE CAT III 600V
- Dimension : 250(L) × 97(W) × 48(H) mm
- Weight : 345gm approx.(including battery)
- Power Supply : 3V (2pcs AAA Batteries)
- Working Environment : 0~40°C, 45% ~ 75% RH Non Condensing (When temperature is less than 10°C)
- Storage Environment : -10°C~50°C, RH is less than 80%
- Accessories : User Manual, Test Leads, 2pcs battery, Soft carry case
SKU: n/a -
Calibrator, Metravi
M-01S mV Thermocouple and RTD Source Calibrator
- DC Voltage: -10.000mV~110.00mV-0.1000V~1.1000V
- Accuracy: 0.05%+0.03mV / 0.05%+0.3mV
- Resolution: 0.01mV / 0.0001V
- Resistance: 0~400.0Ω / 0~4.000KΩ
- Accuracy: 0.05%+0.2Ω / 0.05%+2Ω
- Resolution: 0.1Ω / 1Ω
- Electrical safety : EN61010-1:2001, CE, TUV ISO-9001 Electromagnetic compatibility (EMC) : EN61326-1:2006
- Protection : IP40, 1m drop-tested
- Vibration and fall : IEC 60068-2-64:2008, IEC 60068-2-32:2008
- Display : 5 digits, segment code LCD with white backlight
- Power Supply : 3 x AA alkaline batteries
- Accessories : 1 pair Industrial test leads, User Manual, 3 units AA alkaline Battery, Thermocouple Adapter
SKU: n/a
