Metravi
Showing 85–96 of 103 results
-
ELECTRICAL TESTER, CONTACT-TYPE VOLTAGE TESTER, METRAVI PRO SERIES, VOLTAGE DETECTOR, Metravi
PRO ELEC+ Voltage Detector and Electrical Tester
-26%
ELECTRICAL TESTER, CONTACT-TYPE VOLTAGE TESTER, METRAVI PRO SERIES, VOLTAGE DETECTOR, MetraviPRO ELEC+ Voltage Detector and Electrical Tester
- 1999 counts (3 1/2 digits) LCD display with back-light
- Built-in Flashlight for working in low-light or dark boxes and spaces
- Automatically detects AC/DC Voltage
- Voltage Range: 6V to 1000V AC/DC
Resolution: 1V AC/DC
Tolerances:±3.0% of reading ±5 digit - LED display for AC/DC Voltage values along with numeric display
- LED Voltage Range: 12V to 1000V AC/DC
Response Time:≤1 second - AC Voltage bandwidth 400Hz
- Frequency Range: 0/40Hz to 400Hz
- Auto Polarity indication
SKU: n/a -
LEAKAGE CURRENT CLAMP METER,AC LEAKAGE CURRENT CLAMP METER,HARMONICS CLAMP METER, Metravi
PRO HCM-60 AC Leakage Current Clamp with Harmonics
-26%
LEAKAGE CURRENT CLAMP METER,AC LEAKAGE CURRENT CLAMP METER,HARMONICS CLAMP METER, MetraviPRO HCM-60 AC Leakage Current Clamp with Harmonics
- Data Storage: 2000 groups (through Mobile App)
- Interface: Bluetooth
- Automatic Shutdown
- Insulation: AC3700V/rms (Between iron core and shell)
- Safety: IEC1010-1, IEC1010-2-032, Pollution 2, CAT III (600V)
- Power Supply: 1000 mAh Rechargeable Battery
SKU: n/a -
Metravi, ROTATING MACHINE TESTER, METRAVI PRO SERIES, EV & MOTOR TOOLS, MOTOR TESTING TOOLS
PRO RMT-10 Rotating Machine Tester
-26%
Metravi, ROTATING MACHINE TESTER, METRAVI PRO SERIES, EV & MOTOR TOOLS, MOTOR TESTING TOOLSPRO RMT-10 Rotating Machine Tester
- Temperature -50°C to 1200°C
- Bluetooth for sharing data with Smartphone and free App to share, store and analyse data
- Surge Protection: 8kV peak per IEC 61010
- Enclosure Double-moulded, waterproof Shock (Drop Test) 3.2 feet (1m)
- Diode Test Test current of 0.9mA maximum , open circuit voltage 2.8V DC typical
- Continuity Check: Audible signal will sound if the resistance is less than 50W (approx.), test current <0.35mA
- PEAK: Captures peaks >1ms
- Temperature Sensor requires type K thermocouple
- Input Impedance >10MΩ VDC & >9MΩ VAC
- AC Response True RMS
- ACV Bandwidth 50Hz to 1000Hz
- Crest Factor ≤3 at full scale up to 500V, decreasing linearly to ≤1.5 at 1000V
- Overrange indication “OL” is displayed
- Auto Power Off 15 minutes (approximately) with disable feature
SKU: n/a -
CLAMP METER, DIGITAL TRMS AC/DC CLAMP METER, DIGITAL AC/DC CLAMP METER, Metravi
Pro Solar-2A Digital TRMS AC/DC Clamp Meter
-26%
CLAMP METER, DIGITAL TRMS AC/DC CLAMP METER, DIGITAL AC/DC CLAMP METER, MetraviPro Solar-2A Digital TRMS AC/DC Clamp Meter
- Display: 3-3/4 digits (4000 counts) backlit LCD
- Jaw Opening: 2” (52mm) approx.
- PV DC Voltage: 400mV / 4V / 40V / 400V / 1500V
- Accuracy: ± (1% + 3d)
- AC Voltage T-RMS: 4V / 40V / 400V / 1000V
- Accuracy: ± (1.2% + 5d)
- Diode Testing
- Continuity Test
- Over-range Protection
- Auto-ranging
SKU: n/a -
Metravi, MULTIMETER, DIGITAL MULTIMETER, DIGITAL TRMS MULTIMETER, DIGITAL TRMS MULTIMETER WITH BLUETOOTH, DIGITAL MULTIMETER WITH THERMAL IMAGER
PRO TIM-900 Professional Multimeter with Thermal Imager
-26%
Metravi, MULTIMETER, DIGITAL MULTIMETER, DIGITAL TRMS MULTIMETER, DIGITAL TRMS MULTIMETER WITH BLUETOOTH, DIGITAL MULTIMETER WITH THERMAL IMAGERPRO TIM-900 Professional Multimeter with Thermal Imager
- Bluetooth for data transfer to Smartphone App
- DC Voltage: 400.0mV/4.000V/40.00/400.0/600V
- Accuracy: ± (0.5% reading + 5 digits)
- AC TRMS Voltage: 4.000V/40.00/400.0/600V
- Accuracy: ± (1.0% reading +5 digits)
- AC+DC TRMS Voltage: 4.000V/40.00/400.0/600V
- Accuracy: ± (2.5% reading +20 digits)
- Double Moulding, Double Insulation
- Auto Ranging
- Auto Power-off
- Built-in flashlight to access dark areas
SKU: n/a -
GAS DETECTORS & ANALYSERS, REFRIGERANT GAS LEAKAGE DETECTOR, Metravi
RLD-01 Refrigerant Gas Leakage Detector
-26%
GAS DETECTORS & ANALYSERS, REFRIGERANT GAS LEAKAGE DETECTOR, MetraviRLD-01 Refrigerant Gas Leakage Detector
- Detects all CFC refrigerants such as R-22, R-124, R-11 and R-12
- The ultra-sensitive long life sensor detects the more current, difficult-to-detect HFC refrigerants such as R-134a, R-404A, and new R-22 replacements, R-410A and R-407C.
- It’s long, slim gooseneck probe design is easy to use in close areas and for extending into hard-to-reach areas.
- It’s adjustable alarm, easy one-hand operation and impact resistance storage case add up to value and convenience
- Sensitivity to detect: 100ppm of R-134A/R-22
- Response Time < 2 sec
- Audio and Visual Alarm
SKU: n/a -
Metravi, RELAY TEST SET
RNT-5A Relay Test Set
- This is a portable Relay Testing Set suitable for testing different types like over current, earth leakage relays, circuit breakers of 1A – 5A rating etc.
- All the components are assembled and enclosed with a portable air cooled M.S. cabinet
- Input: 230V AC 50Hz
- Output Current: 1A – 5A–10A-20A – 50A-100A-200A. as per output range selection
- Maximum Capacity: 1200VA
- Output Voltage: 0 – 240V AC or DC of capacity 1A
- Built-in digital time interval meter – Checks latching time as well as contact reliability of relay under test
- Time Range: 0 – 9.999 Sec & 0 – 99.99 Sec
SKU: n/a -
CALIBRATOR, SOUND LEVEL CALIBRATOR, Metravi
SC-05 Sound Level Calibrator
- Standard Sound Ringing Capabilities at 94dB and 114dB
- Can be used for both A Weighting and C Weighting Calibration
- Low Battery Indication
- Output frequency: 1kHz
- Accuracy: ±0.5dB
- Output Frequency 1000Hz, ±4%
- Reference Temperature Conditions >23ºC (73ºF)
- Atmospheric pressure >1013 mbar (760mm of Hg)
- Relative humidity >65%RH
- Accuracy of Sound Pressure Level Under stated reference environment conditions ±0.5dB
- Complete with user manual and battery
SKU: n/a -
DISCHARGE RODS, Metravi
Single Phase FRP Telescopic Earth and Discharge Rod
- Material : FRP Pultruded
- Process : Automatic Pultrusion Plant
- Surface : Smooth and Glossy
- Design : Telescopic
- Locking : Push Button type Locking System
- Total Sections : 03
- Assembled Length : 15 feet
- H.V.Test : 110 KV
- Glass Content : 65 %.
- Top Section Dia : 25 mm.
- Bottom Section Dia : 45 mm.
- Earthing : Die cast Aluminium Earthing instrument for 30mm Dia
SKU: n/a -
LCR METER, SMT COMPONENT TESTER, Metravi
SMT-01 SMT Component Tester
- SMT Component Tester combined with Multimeter
- Display: 6000 Counts LCD
- Auto Power Off
- Over range and Low Battery Indication
- Auto-scan function for Resistance, Capacitance and Diode Test
- DC Voltage Range: 0 – 600m/6V/50V
- Accuracy: ±0.8%
- AC Voltage Range: 0 – 600m/6V/50V
- Accuracy: ±1.0%
- Diode Test Function.
- The SMT Tweezers can be replaced by Test Leads for DMM Function
SKU: n/a -
CABLE FAULT LOCATOR, DIGITAL CABLE FAULT LOCATOR, TELECOM CABLE FAULT LOCATOR, Metravi
TDRL-912 Telecom Cable Fault Locator
-26%
CABLE FAULT LOCATOR, DIGITAL CABLE FAULT LOCATOR, TELECOM CABLE FAULT LOCATOR, MetraviTDRL-912 Telecom Cable Fault Locator
- Digital Gain Adjustment Control: to make the gain adjustment very easy.
- Digital Waveform Automatic Identification technique: to make sure there is no test dead zone.
- Top-grade ARM single chip micro-computer: enables calculations and judge fault waveforms accurately.
- Display: Large colourful LCD, easy and simple to use.
- Power: High-energy Li-ion battery, provides continuous
- Working Capacity: for 10 hours (post full charge)
- Max range: 8 kms (16kms/32kms are optional)
- Highest resolution: 1m
- Dead Zone: 0m
- Power consumption: 1W
- Package includes: Fault Locator, 2 Test Lines, Charger, Carrying Bag, User Manual, CD with Software & U-Disk (only for USB function)
SKU: n/a -
DISCHARGE RODS, Metravi
Three Phase FRP Telescopic Earth and Discharge Rod
- Process : Automatic Pultrusion Plant
- Surface : Smooth and Glossy
- Design : Telescopic
- Locking : Push Button type Locking System
- Total Sections : 03
- Assembled Length : 15 feet
- H.V.Test : 110 KV
- Glass Content : 65 %.
- Top Section Dia : 25 mm.
- Bottom Section Dia : 45 mm.
- Earthing : Die cast Aluminium Earthing instrument for 30mm Dia
- Cable : 6 sq. mm. Copper cable 6 mts.
- Clamp : Crocodile grounding clamp
SKU: n/a
