Search results: “Calibration”
Showing 1–24 of 25 results
-
Controllers, Novus, Process Control & Indication
Time and Temperature Controller N1040T
- Single model with 4 configurable outputs for process control, alarms, or timing.
- PID auto-tuning, ON-OFF control, and full parameter configurability.
- Configuration protection with password security and factory calibration recovery.
- Two independent timers with multiple operation modes.
- Flexible timer association with controller output or temperature control.
- Accepts Pt100 RTD and J/K/T thermocouples with decimal precision.
- Compact, flameproof plastic enclosure with reduced depth.
- Fast electrical connection coupler for quick installation.
SKU: n/a -
Novus, Sensors & Transmitters, Temperature Transmitters
TxRail-USB DIN Rail Temperature Transmitter
- Universal Input Compatibility: Supports Thermocouples (J, K, T, E, N, R, S, B), RTDs (Pt100, Pt1000), NTC thermistors, and voltage inputs (0-50 mV, 0-100 mV).
- Configurable Measurement Range: User-defined measurement ranges.
- Flexible Output Options: Selectable 4-20 mA or 0-10 VDC output.
- User-Friendly USB Configuration: Configurable via USB Micro-B and SigNow software.
- High Accuracy: ±0.1% of full scale for various inputs.
- Wide Operating Temperature Range: -40 to 85 °C.
- Compact DIN Rail Mount Design: Easy installation in control panels.
SKU: n/a -
Calibration tools, FLUKE
Fluke 707 Current Loop Calibrator
- High performance loop calibrator for calibration, repair, and maintenance
- Features large display and simple, quick-click interface for easy one-handed operation.
- Provides simultaneous mA and % readout for quick, easy interpretation of readings.
- Delivers mA accuracy of 0.015%
- Provides 1 µA resolution for mA source, simulate, and measure
SKU: n/a -
Electrical tools, FLUKE
Fluke 1630-2 FC Earth Ground Clamp
- Test the grounding components of equipment in hard-to-reach spaces, including areas that are indoors or fully paved and do not permit driving auxiliary test stakes.
- AC Leakage Current Measurement: Identify AC leakage without disconnecting your earth ground stake from the grounding system
- Rugged: Heavy-duty clamp jaw stays in alignment and calibration on tough jobsites
- Logging measurement: Saves up to 32,760 measurements in memory
SKU: n/a -
FLUKE, Temperature measurement, Temperature measurement
53 II Temperature Logging Digital Thermometer
FLUKE, Temperature measurement, Temperature measurement53 II Temperature Logging Digital Thermometer
- Single Input digital thermometer with data logging for lab, QA, process calibration, food safety and HVAC
- Logs up to 500 points of data at user adjustable recording intervals
- Measures J, K, T, E, R, S, and N-type thermocouples
- Presents results in °C, °F, or Kelvin (K) on a large backlit display
- Provides a recall function to easily review logged data
SKU: n/a -
FLUKE, Temperature measurement
Fluke 52 II Dual Probe Digital Thermometer
- Dual-input digital thermometer for lab, QA, process calibration, food safety and HVAC
- Shows any combination of T1, T2, T1-T2, plus MIN, MAX, or AVG on the large backlit dual display
- Features fast response and laboratory accuracy (0.05% + 0.3°C)
- Includes a relative time clock on MIN, MAX, and AVG to provide a time reference for major events
SKU: n/a -
Electrical tools, FLUKE
Fluke 177 True-RMS Digital Multimeter
- True-RMS digital multimeter with the features professional technicians prefer
- Increases productivity with manual and automatic ranging, Display Hold, Auto Hold, and Min/Max-average recording
- Measures AC and DC voltage to 1000 V
- Delivers accurate True-RMS AC current and voltage plus frequency, capacitance, resistance, continuity and diode measurements
- Safety rated CAT III 1000 V, CAT IV 600 V
SKU: n/a -
Calibration tools, FLUKE
Fluke 705 Loop Calibrator
- Powerful loop calibrator that provides a very cost effective, integrated solution for calibration, repair, and maintenance of milliamp loops
- Provides simultaneous mA and % readout for quick, easy interpretation of readings.
- Delivers mA accuracy of 0.02%
- Features push button 25% steps for fast, easy linearity checks
SKU: n/a -
Electrical tools, FLUKE
Fluke 1630-2 FC Earth Ground Clamp
- Test the grounding components of equipment in hard-to-reach spaces, including areas that are indoors or fully paved and do not permit driving auxiliary test stakes.
- AC Leakage Current Measurement: Identify AC leakage without disconnecting your earth ground stake from the grounding system
- Rugged: Heavy-duty clamp jaw stays in alignment and calibration on tough jobsites
- Logging measurement: Saves up to 32,760 measurements in memory
SKU: n/a -
Electrical tools, FLUKE
Fluke 51 II Handheld Digital Probe Thermometer
- Single Input digital thermometer for lab, QA, process calibration, food safety and HVAC
- Measures J, K, T, and E-type thermocouples
- Presents results in °C, °F, or Kelvin (K) on a large backlit display
- Includes a relative time clock on MIN, MAX, and AVG to provide a time reference for major events
SKU: n/a -
FLUKE, Fluke Digital Multimeters
Fluke 175 True-RMS Digital Multimeter
- Provides the baseline multimeter features you need for troubleshooting and repairing electrical and electronic systems
- Delivers accurate true-RMS AC current and voltage plus frequency, capacitance, resistance, continuity and diode measurements
- Increases productivity with manual and automatic ranging, Display Hold, Auto Hold, and Min/Max-average recording
SKU: n/a -
Data Logger, Metravi
DL-SL-01 Sound Level Data Logger
- This unit confirms to the IEC61672-1 CLASS2 for Sound Level Meter.
- NORM (Normal) & PEAK mode
- Data manage: STORE, REAL TIME
- Over range indication
- A & C Weighting
- FAST & SLOW response
- Software Calibration
- Manual & Automatic Start Modes
- Measurement Range: 30dB to 130dB
- Sampling Rate: Settable from 1 Sec. to 24 Hours.
- With USB PC Interface Cable and Software
SKU: n/a -
Calibrator, Metravi
BB-500 Infrared Thermometer Black Body Calibrator
- Black Body is used to calibrate infrared thermometers
- Easily certify infrared thermometers up to 500°C (932°F)
- RTD Reference Well for high precision
- Small compact design
- Temperature Range : 50°C ~ 500°C (122°F ~ 932°F)
- Heating Time : 30 minutes to max
- Cooling Time : 30 minutes to 100 °C (122°F)
- Aperture Diameter : 58mm
- Power : 220VAC(±10%), 1.25A / 110VAC(±10%),2.5A
- Complete with carrying case and instruction manual
SKU: n/a -
Calibrator, Metravi
CE-0102TMC Non-Contact Tachometer Calibrator
- Easy to use calibrator for instant and reliable calibration of Non -Contact tachometers up to 199999 RPM
- The desired RPM can easily be set using the front panel switches
- Since RPM is a function of the frequency,the bright White LED flashes at avalue nearest to the set RPM and the actual RPM/Frequency is displayed on the 2 Line Backlit alpha numeric LCD display
- The actual RPM/Frequency is displayed on the 2 Line Backlit alpha numeric LCD display
SKU: n/a -
Calibrator, Metravi
SC-05 Sound Level Calibrator
- Standard Sound Ringing Capabilities at 94dB and 114dB
- Can be used for both A Weighting and C Weighting Calibration
- Low Battery Indication
- Output frequency: 1kHz
- Accuracy: ±0.5dB
- Output Frequency 1000Hz, ±4%
- Reference Temperature Conditions >23ºC (73ºF)
- Atmospheric pressure >1013 mbar (760mm of Hg)
- Relative humidity >65%RH
- Accuracy of Sound Pressure Level Under stated reference environment conditions ±0.5dB
- Complete with user manual and battery
SKU: n/a -
Calibrator, Metravi
709H mV mA Loop Calibrator with HART Communication
- Compact Loop Calibrator with HART communication
- Able to read basic device information and execute diagnostic tests
- High precision ±0.01%
- High resolution 0.001mA
- Automatic Ramp & Step
- High visibility 3.2″ TFT colour display with backlight
- Supports SCPI
- Auto Power Off and Low Battery display
- Max. permitted voltage: 30V (between any two terminals or between any terminal and earth ground)
- Operating temperature : 0°C ~ 50°C
- Operating relative humidity: ≤ 80%RH
- Protection level: IP65 (Dust, Water spray)
SKU: n/a -
-
masibus, Universal Calibrator
Universal Calibrator uCAL UC12
- Compact, handheld, User friendly menu
- Available with EMI/EMC compliance
- Easy to read Color Graphical TFT LCD display
- Rechargeable lithium Ion battery with enhanced power control for prolonged battery life
- Measure: mA/ V/ mV/ mA (24V)/ Switch-test / RTD/ TC/ Frequency/ Pulse
- Source: mA/ V/ mV/ mA(2W)/ Resistance/ RTD/ TC/ Frequency/ Pulse
- 24 VDC Loop power Supply to power transmitters and loops
- Step/Ramp functions with Auto/Man selection
SKU: n/a -
anemometer, HVAC Instruments, TESTO, vane anemometer
Testo 110 – NTC and Pt100 temperature measuring instrument with App
anemometer, HVAC Instruments, TESTO, vane anemometerTesto 110 – NTC and Pt100 temperature measuring instrument with App
- Simple, fast and particularly precise temperature measurement with NTC or Pt100 probes (optionally available)
- Fast in-app configuration, graph history, second screen and measurement data memory in the testo Smart App
- HACCP-compliant, certified according to EN 13485 for use in the food sector
- High-precision measurement results and high system accuracy with digital Pt100 sensors (calibration without measuring instrument).
SKU: n/a -
Cooking Oil Tester, TESTO
Testo 270 cooking oil tester
- Capacitive oil sensor from Testo, teamed with its ergonomic design, make it possible to take measurements in hot oil (user is protected from the heat of the deep fat fryer)
- IP 65: protected against water jets without a protective cover
- Clear, visual alarm indication via highly-visible alarm backlight in traffic light colours
- Washable case for hygienically stowing away at the application site
SKU: n/a -
Differential pressure transmitters, HK
DPI-Differential pressure transmitters
- Configurable switching point:
– Open on the rise or fall in pressure
– Hysteresis of set-point - Measurement units (Pa, kPa, mmWC, inWC, mbar)
- Measurement ranges (4 ranges per model)
- Output signal (0−10 V, NO/NC)
- Span and zero-point calibration
SKU: n/a - Configurable switching point:
-
Differential pressure transmitters, HK
DPT-R8 Differential pressure transmitters
- Multiple measurement units, field selectable via jumper, including inWC, mmWC, Pa, mbar
- 8 field selectable measurement ranges, unidirectional or bi-directional, selectable via jumper
- Proportional output options include: voltage (0–10 V / 2-10 V) and current (4–20 mA)
- AZ (autozero) function for automatic zero point calibration, eliminating the need for periodic manual autozeroing to ensure long-term accuracy
- Backlit display
- Field adjustable span point calibration (i.e. gain)
SKU: n/a -
Short Circuit Loop Measurements, Sonel
MZC-330S
- Measurement of very low short circuit loop impedances (with resolution 0,1 mΩ) with a current of 130 A at 230 V; maximum 300 A at 690 V.
- Measurement with a current of 24 A at 230 V, maximum 37 A at 690 V with resolution 0,01 Ω.
- Measurements in installations with rated voltages: 110/190 V, 115/200 V, 127/220 V, 220/380 V, 230/400 V, 240/415 V, 290/500 V and 400/690 V and frequencies 45…65 Hz.
- Ability to perform measurements in short circuit system: phase-phase, phase-PE, phase-N.
- Differentiation between the phase voltage and the inter-phase voltage while calculating the short circuit current.
- Ability to change the length of test lead (measurement with 2p method).
- 4p (four-pole) method, test leads do not require calibration (measurement with current up to 300 A).
- Measurement of resistance (RS) and reactance (XS) components.
SKU: n/a
